19 Nov
2004
19 Nov
'04
1:45 a.m.
* Jay Miller jmiller@actuality-systems.com [041119 00:13]:
I thought it might be an ht issue because needs_reset gets set by the ht_setup_chain, and our board is unique in that it has 8151->8131->8111 all on link 0. But I adjusted the position passed into that function and saw no improvement. Perhaps the position I chose was wrong (0xa0 vs the default 0x80)?
80 is ldt0, a0 is ldt1, c0 is ldt2
Stefan