It can treat 4G as 2G modules, if I comment out physical bank check. (!=2 get out).
YH
-----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Tuesday, November 23, 2004 1:03 PM To: YhLu Cc: 'Eric W. Biederman'; 'LinuxBIOS' Subject: Re: 4G 4 Rank memory module
* YhLu YhLu@tyan.com [041123 22:04]:
2G modules for CPU0
It seems to dislike the 2G Modules it seems..? Can you try with only the 4G modules?
4G modules for CPU1.
-----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Tuesday, November 23, 2004 12:56 PM To: YhLu Cc: 'Eric W. Biederman'; 'LinuxBIOS' Subject: Re: 4G 4 Rank memory module
- YhLu YhLu@tyan.com [041123 20:51]:
Ram2.00 rows: 0x0000000d columns: 0x0000000c banks: 0x00000004 module data width : 0x00000048 side2 banks: 0x00000002
Ram2.01 rows: 0x0000000d columns: 0x0000000c banks: 0x00000004 module data width : 0x00000048 side2 banks: 0x00000004 Bad SPD value
CPU0 got 2G modules CPU1 got 4G modules Side2 banks is different.
Is this with two different modules? Ram2.00 Shows a difference. Maybe noise on the I2C bus? Ram2.01 seems to be ok..?!?
Stefan