thanks, ron now i have four questions.
first, i modified the config file. now linuxbios does not run correctly, but it shows more messages. when load the linuxbios directly, the message is
? xxxxxxxfx~ffxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxffxf
when load the linuxbios after doing original bios, the message is
linuxbios-1.0.0 2003. 09. 09. (ȭ) 16:04:55 kst starting... dump device: 00000000 00: 06 11 23 31 06 00 30 02 00 00 00 06 00 00 00 00 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 40: 00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00 50: e0 00 00 02 c0 04 00 00 22 00 01 01 01 01 00 00 60: 00 00 00 00 e4 00 00 2a 00 00 00 00 00 00 00 00 70: 00 48 00 00 01 00 00 00 01 00 00 00 00 00 02 00 80: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00 b0: 00 00 00 00 c0 00 00 00 aa 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 01 00 40 00 00 00 00 00 00 00.............................= 11 f0: 00 00 00 00 00 00 03 13 00 00 00 00 00 00 00 00 .................................... done...... dump device: 00008800...........0001c60 - 00: 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00............................ef] ioup) new segment a 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 .......................................... 40: 00 80 00 00 00 00 00 00 0c 20 00 00 04 00 00 00000 - 0x000010ff] io 50: 09 1d 00 00 00 00 00 00 20 00 00 01 00 00 00 00 ................... 60: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00.........cmd ................................................. a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00-07- 00000674 ch c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00ader class! pci devices i d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 data=0009884e firmware t e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00m linux version 2.4.18 (root@epiam) ( f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 done. dump device: 00008900cache... 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffios-e820: 00000000000006d4 - 00000000000a0000 (us 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffnuxbios_c.o(.te inode-cache hash 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff un mount-cache hash table entries: 2048 (or 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <sleep> < re 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffr-cache hash table entries: 4096 (order: 2, 16384 b 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff checking 'hlt' instruction... ok.:11 done. dump device: 00000000 check 00: 06 11 23 31 06 00 30 22 00 00 00 06 00 00 00 00 apnp enabled cmd <- 07 tty 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00k or from (l)ocal? cl 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00: 128 slots per queue, batch=320:01.0 1c <- [ 80: 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00rt> boot fr vp_ide: not 100% native m 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 probing...[via 86c100]fou a0: 02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00bm-dma at 0x18e0-0x18e7, bios settings: hda:pio, hd b0: 00 00 00 00 c0 00 00 00 aa 00 00 00 00 00 00 00 io address 1400 ethernet addres c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 analyzing media type,this 40: 45 7f f0 00 00 00 00 00 0c 20 00 00 44 00 0b 08 you might want to try agp_tr 50: 81 1d 09 00 00 b0 ac 50 23 00 00 00 00 00 00 00 linespeed=100mbs fullduplex usb.c: new usb bus registered, assign 90: 00 f1 60 88 a0 c0 00 00 00 20 00 00 00 00 00 00 pci: 00:01.0 [1106/b a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0009. (ȭ) 16:04:55 kst starting... b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.0 [1106/3038] dump device: c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 23 31 06 00 30 02 00 00 00 06 00 00 00 00 d0: 01 05 01 00 00 00 00 00 00 00 00 00 00 00 00 000.3 [1106/3104] 10: 08 00 0 e0: 00 00 00 00 14 08 00 00 00 00 00 00 00 00 00 00 pci: 00:11. f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 0 00 00 00 00 00
40: 0b f2 00 05 18 1c c0 00 a8 a8 a8 20 ff 00 b6 b600 00 00 eaffff 50: 07 07 07 07 0c 03 00 00 a8 a8 a8 a8 00 00 00 00 00: 06 11 77 31 87 00 10 0 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00io 70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 000 00 00 00 00 00 00 00 00 00 0018c0 - 0x000018df] i 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 0 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00: 00:01.0 cmd <- 07 p 80: 00 d0: 06 00 71 05 00 00 00 00 00 00 00 00 00 00 00 00d <- 01 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000: 00 f1 60 00 b0 c0 00 00 10 20 00 00 00 00 00 001 f0: 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 00 pci: 00:10.3 cmd <- 02 a0: 0 done.0 00 copying linuxbios to ram. 00 00 00 jumping to linuxbios. pci: 00 linuxbios-1.0.0 2003. 09. 09. (ȭ) 16:04:55 kst booting... 00 00 00 00 00 00 00 00 00 00i: 00:12.0 cmd <- 83 finding pci configuration type. pci: 00:0d.0 [1106/3044] e0: 00 00 00 0 pci: 00:10.0 [1106/3038] 00 00 00 00 pci: 00:10.1 [1106/3038] setting f pci: 00:10.2 [1106/3038] pci: 00:10.3 [1106/3104]0 05 00 00 00 00 00 00 0 pci: 00:11.0 [1106/3177] pci: 00:11.1 [1106/0571] ff ff ff ff ff ff ff ff pci: 00:11.5 [1106/3059] pci: 00:12.0 [1106/3065]or type : 0x00 pci: pci_scan_bus for bus 1f ff ff ff ff ff ff ff ff f pci: pci_scan_bus returning with max=01 initia pci: pci_scan_bus returning with max=01 b0: donef ff allocating pci resources...ff ff ff ff fix d pci: 00:00.0 register 10(00000008), read-only ignoring itenabled pci: 00:00.0 register 10(00000008), read-only ignoring it ff ff ff ff ff ff ff ff ff ff ff ff ff initialized assign resources, bus 0 pci: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff f pci: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmemthbridge fixup cpu #0 in setting pci: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem0 to 0:d.0 112mb, ra pci: 00:0d.0 10 <- [0xfeb00000 - 0xfeb007ff] mem00 00 00 00ng usb pci: 00:0d.0 14 <- [0x00001800 - 0x0000187f] irq 11 to 0:10.0 rom s pci: 00:12.0 10 <- [0x00001400 - 0x000014ff] io 00 pci: 00:12.0 14 <- [0xfeb02000 - 0xfeb020ff] mem 80: 20 84 59 00 f2 70 00 00 01 04 00 00 00 assigned resources, bus 0 done. et enabling pci resourcess...pci: 00:00.0 cmd <- 06 from (n)etwork o 90: 00 f1 pci: 00:01.0 cmd <- 070 00 00 00 00 00 00 pci: 00:0d.0 cmd <- 07 pci: 00:12.0 cmd <- 07 00 00 00 00 00ec done. initializing pci devices... io address 1400 e pci devices initialized3 totalram: 127m c0: 01 0 initializing cpu #000 00 00 00 00 00 0 enabling cache... setting fixed mtrrs(0-88) type: uca type,this will take severa setting fixed mtrrs(0-16) type: wb d0: 01 05 01 00 00 00 00 00 00 0 done fixed mtrrs0090 via lane3): setting variable mtrr 0, base: 0mb, range: 64mb, type wb linespeed=100mbs fulld setting variable mtrr 1, base: 64mb, range: 32mb, type wb00 not enabled thisrtc i setting variable mtrr 5, base: 124mb, range: 2mb, type wb c0: 01 00 02 done variable mtrrs 00 00 00 00 00 00 clear out the extra mtrr's ju call intel_enable_fixed_mtrr() unknown d0: 06 call intel_enable_var_mtrr()0 00 00 00 00 000000us 00 pc leave setup_mtrrs done. max cpuid index : 1 data=0009884ences vendor id : centaurhauls firmwa e0: 00 00 00 00 00 processor type : 0x00 00 00sion 2.4.18 (root@e processor family : 0x06 processor model : 0x08 fixed mtrrs : enabled variable mtrrs: enabled-provided physical r disabling local apic...done. linuxbios-1.0.0 20 cpu #0 initialized:04:55 kst mainboard fixup final mainboard fixup_bus southbridge fixup6/3044]0 setting firewirehm, page 0000000 assigning irq 12 to 0:d.0 pci: 00:10.0 [1106/303 readback = 12 sear setting usb assigning irq 11 to 0:10.0/3038]urning with max=01oc readback = 11 assigning irq 12 to 0:10.100:10.2 [1106/3038] readback = 12 zone(1 assigning irq 10 to 0:10.2 readback = 10 pci: assigning irq 5 to 0:10.3ommand line: conso readback = 5 setting ethernet 00:11.1 [1106/0 assigning irq 11 t calibrating pci: pci_scan_bus returning with max=0 able() - irq_routing_table located at: 0x000090000.2 cmd <- 0107. memor done.i: pc copying irq routing tables to 0xf0000...done. reserved,0:10.3 cmd <- 0 verifing priq routing tables copy at 0xf0000...failed done00:0 allocating pci resourc wrote linuxbios table at: 00000500 - 00000664 checksum 4050 [0xfeb01000 - 0xfeb010ff] mempci: probing pci hardware welcome to elfboot, the open sourced starter. pci: 00:11.1 20 <- [0x0 january 2002, eric biederman.ci: 00:01.0 24 <- [0xfeb00000 version 1.2 ven linux n done.for l enabling pci resource 000000000037e0.0 cmd <- 06ns clearing segment: addr: 0x00000000000977e0 memsz: 0x0000000000003b48 pci: 00: jumping to boot code at 0x9400001 rom segment 0x0000 length 0x0000 reloc 0x9400 pci_scan_ etherboot 5.0.8 (gpl) tagged analyzing media type,this will take several seconds........okbus sp initializing cpu #0verride linespeed=100mbs fullduplex enab searching for server (dhcp)...setting fixed mtrrs(0-88) type ..me: 192.168.1.102, server: 203.252.137.169 vp_ide: ide controller on loading 203.252.137.169:/vmlinuz.epiam ...(elf)... .............................
i think that the 2th message and the 1th message are same but output type(?) is different. (correct? ㅡ.,ㅡ;) i will be waitting for your advices :)
second, after loading the linux kernel, the booting stops with a following message.
... linux kernel card services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver hub uhci.c: usb universal host controller interface driver v1.1 uhci.c: usb uhci at i/o 0x1880, irq 11 usb.c: new usb bus registered, assigned bus number 1
i don't know why the booting stops here.
third, what is the post card? post = power on self test? if it does, how can i check the post card?
fourth, what does [pmx:##] mean? :)
have a nice day~
DDR보다 신난다! 온라인으로 즐기는 3D아바타 댄싱 게임 http://showtime2.freechal.com/index.asp