On 03/03/13 14:28, Andrew Basterfield wrote:
Hi Andrew
The lack of 2nd PCIe and ethernet is expected behavior when the 2nd socket is empty - please see the following
ftp://ftp.tyan.com/manuals/m_s2895_101.pdf
Please see 2nd 'NOTE' section 2.4 page 18
Looking at the system architecture section 2.2, page 9, it becomes clear why this is so.
Ooh, ugly. Sorry, I misunderstood what you were saying was the problem.
I think I will have to re-cap the board to restore the 2nd CPU socket to eliminate this variable.
--Andrew
You say it is stable with one CPU using the Tyan BIOS so it is at least possible to use the board as is. There is certainly code in the S2895 devtree and mptable to allow for the missing devices caused by a missing 2nd CPU but I have no idea how well tested that is. How does it behave if you boot with ACPI disabled?
Andrew