On Mon, Aug 04, 2008 at 07:59:59PM -0700, ron minnich wrote:
can you run make Q= V=1
first plain:
$ make CP build/config.h GEN build/build.h HOSTCC build/util/options/build_opt_tbl OPTIONS build/mainboard/gigabyte/m57sli/option_table.c CC build/stage0.init /usr/lib/gcc/i686-pc-linux-gnu/4.2.2/../../../../i686-pc-linux-gnu/bin/as: unrecognized option '-T' make: *** [/home/stuge/co/v3/build/stage0.init] Error 1
then loud:
$ make Q= V=1 mkdir -p /home/stuge/co/v3/build printf " CP build/config.h\n" CP build/config.h cp /home/stuge/co/v3/.tmpconfig.h /home/stuge/co/v3/build/config.h printf " GEN build/build.h\n" GEN build/build.h printf "#define COREBOOT_VERSION "3.0."722""\n" > /home/stuge/co/v3/build/build.h printf "#define COREBOOT_EXTRA_VERSION ""\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_BUILD "`LANG= date`"\n" >> /home/stuge/co/v3/build/build.h printf "\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_COMPILER "gcc (GCC) 4.2.2 (Gentoo 4.2.2 p1.0)"\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_ASSEMBLER "GNU assembler (GNU Binutils) 2.18"\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_LINKER "GNU ld (GNU Binutils) 2.18"\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_COMPILE_TIME "`LANG= date +%T`"\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_COMPILE_BY "stuge"\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_COMPILE_HOST "n410c"\n" >> /home/stuge/co/v3/build/build.h printf "#define COREBOOT_COMPILE_DOMAIN "stuge.se"\n" >> /home/stuge/co/v3/build/build.h mkdir -p /home/stuge/co/v3/build/util/options/ printf " HOSTCC build/util/options/build_opt_tbl\n" HOSTCC build/util/options/build_opt_tbl gcc -Wall -Wstrict-prototypes -g -fomit-frame-pointer -Wno-unused -Wno-sign-compare -o /home/stuge/co/v3/build/util/options/build_opt_tbl /home/stuge/co/v3/build/util/options/build_opt_tbl.o printf " OPTIONS build/mainboard/gigabyte/m57sli/option_table.c\n" OPTIONS build/mainboard/gigabyte/m57sli/option_table.c mkdir -p /home/stuge/co/v3/build/mainboard/gigabyte/m57sli /home/stuge/co/v3/build/util/options/build_opt_tbl -b \ --config /home/stuge/co/v3/mainboard/gigabyte/m57sli/cmos.layout \ --option /home/stuge/co/v3/build/mainboard/gigabyte/m57sli/option_table.c # We need to be careful. If stage0.o gets bigger than # 0x4000 - 0x100, we will end up with a 4 gig file. # I wonder if that behavior is on purpose. # Note: we invoke gcc (instead of ld directly) here, as we hit # strange problems in the past. It seems that only gcc knows how # to properly invoke ld. printf " CC build/stage0.init\n" CC build/stage0.init gcc -nostdlib -static -T /home/stuge/co/v3/arch/x86/ldscript.ld \ /home/stuge/co/v3/build/lib/uart8250.o /home/stuge/co/v3/build/lib/mem.o /home/stuge/co/v3/build/lib/lar.o /home/stuge/co/v3/build/lib/delay.o /home/stuge/co/v3/build/lib/vtxprintf.o /home/stuge/co/v3/build/lib/vsprintf.o /home/stuge/co/v3/build/lib/console.o /home/stuge/co/v3/build/lib/string.o /home/stuge/co/v3/build/lib/lzma.o /home/stuge/co/v3/build/arch/x86/stage1.o /home/stuge/co/v3/build/arch/x86/serial.o /home/stuge/co/v3/build/arch/x86/speaker.o /home/stuge/co/v3/build/arch/x86/udelay_io.o /home/stuge/co/v3/build/arch/x86/mc146818rtc.o /home/stuge/co/v3/build/arch/x86/post_code.o /home/stuge/co/v3/build/arch/x86/amd/k8/stage1.o /home/stuge/co/v3/build/arch/x86/amd/stage0.o /home/stuge/co/v3/build/mainboard/gigabyte/m57sli/stage1.o /home/stuge/co/v3/build/mainboard/gigabyte/m57sli/option_table.c /home/stuge/co/v3/build/superio/ite/it8716f/stage1.o /home/stuge/co/v3/build/device/pnp_raw.o -o /home/stuge/co/v3/build/stage0.o /usr/lib/gcc/i686-pc-linux-gnu/4.2.2/../../../../i686-pc-linux-gnu/bin/as: unrecognized option '-T' make: *** [/home/stuge/co/v3/build/stage0.init] Error 1
//Peter