Re: [coreboot] rtc wake up does not work on ASUS M2V-MX SE

[Fengwei Zhang]

Hi Rudolf,

Thanks for your email. I tried with your way, but the RTC0 device still 
is not visible.
either from /dev/ or /sys/class/ directory.

I also extract DSDT table from Original BIOS,

Device(RTC0)
    {
    Name(_HID, EISAID("PNP0B00"))
    Name(CRS0, ResourceTemplate()
    {
    IO(Decode16, 0x0070, 0x0070, 0x00, 0x02)
    IRQNoFlags() {8}
    })
    Name(CRS1, ResourceTemplate()
    {
    IO(Decode16, 0x0070, 0x0070, 0x00, 0x02)
    })
    Method(_CRS, 0, NotSerialized)
    {
    If(LOr(LEqual(SHTB, Zero), LEqual(^^HPET.SHTS(), Zero)))
    {
    Return(CRS0)
    }
    Return(CRS1)
    }
    }
It looks like same thing you posted in last email. but I cannot compile 
successfully for this one because of some unrecognized symbol of this 
line: LEqual(^^HPET.SHTS(),

I did enable the power button in lpc.c file.

Is there anything else I am missing?

Thanks,
Fengwei

On 04/19/2011 02:24 PM, Rudolf Marek wrote:
> Hi
>
> I think two things are missing:
> Paste this into the dsdt table:
>
> Device(RTC0) {
> Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4
> compatible) */
> Name(_CRS, ResourceTemplate() {
> IRQNoFlags(){8}
> IO(Decode16,0x0070, 0x0070, 0, 2)
> })
> } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
>
> Now the RTC device should be visible. Second problem is that a wakeup
> event is not enabled. This can be fixed most likely here:
> Index: lpc.c
>
> --- lpc.c (revision 6474)
> +++ lpc.c (working copy)
> @@ -237,6 +237,9 @@
> printk(BIOS_DEBUG, "SLP_TYP type was %x %x\n", tmp, acpi_slp_type);
> #endif
> /* enable power button wakeup and from RTC */
> outb(0x5, VT8237R_ACPI_IO_BASE + 0x3);
>
> /* All SMI on, both IDE buses ON, PSON rising edge. */
> outw(0x1, VT8237R_ACPI_IO_BASE + 0x2c);
>
> Completely untested but might even work.
> Please let me know if it works for you,
>
> Thanks,
> Rudolf