- TOM2 is filled in by the dynamic ACPI code. Don't hardcode it in the DSDT and use the dynamic TOM2 variable instead. - The DSDT needs to be revision 2 or above to handle 64 bit variables. This will require a recent (not older than 2007) iasl (ACPI compiler). - Fix an incorrect comment.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/acpi/dsdt.asl =================================================================== --- LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/acpi/dsdt.asl (Revision 4009) +++ LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/acpi/dsdt.asl (Arbeitskopie) @@ -21,7 +21,7 @@ DefinitionBlock ( "DSDT.AML", /* Output filename */ "DSDT", /* Signature */ - 0x01, /* DSDT Revision */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ "AMD ", /* OEMID */ "DBM690T ", /* TABLE ID */ 0x00010001 /* OEM Revision */ @@ -32,7 +32,6 @@ /* Data to be patched by the BIOS during POST */ /* FIXME the patching is not done yet! */ /* Memory related values */ - Name(TOM2, 0x0) /* Top of RAM memory above 4GB (>> 16) */ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ Name(PBLN, 0x0) /* Length of BIOS area */ @@ -1130,6 +1129,7 @@ /* Note: Only need HID on Primary Bus */ Device(PCI0) { External (TOM1) + External (TOM2) Name(_HID, EISAID("PNP0A03")) Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ Method(_BBN, 0) { /* Bus number = 0 */ @@ -1476,7 +1476,7 @@ 0x0000, /* range minimum */ 0x0CF7, /* range maximum */ 0x0000, /* translation */ - 0x0CF8 /* Resource source index */ + 0x0CF8 /* length */ )
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, Index: LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/pistachio/acpi/dsdt.asl =================================================================== --- LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/pistachio/acpi/dsdt.asl (Revision 4009) +++ LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/pistachio/acpi/dsdt.asl (Arbeitskopie) @@ -21,7 +21,7 @@ DefinitionBlock ( "DSDT.AML", /* Output filename */ "DSDT", /* Signature */ - 0x01, /* DSDT Revision */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ "AMD ", /* OEMID */ "PISTACHI", /* TABLE ID */ 0x00010001 /* OEM Revision */ @@ -32,7 +32,6 @@ /* Data to be patched by the BIOS during POST */ /* FIXME the patching is not done yet! */ /* Memory related values */ - Name(TOM2, 0x0) /* Top of RAM memory above 4GB (>> 16) */ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ Name(PBLN, 0x0) /* Length of BIOS area */ @@ -1129,6 +1128,7 @@ /* Note: Only need HID on Primary Bus */ Device(PCI0) { External (TOM1) + External (TOM2) Name(_HID, EISAID("PNP0A03")) Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ Method(_BBN, 0) { /* Bus number = 0 */ @@ -1399,7 +1399,7 @@ 0x0000, /* range minimum */ 0x0CF7, /* range maximum */ 0x0000, /* translation */ - 0x0CF8 /* Resource source index */ + 0x0CF8 /* length */ )
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,