coreboot June 2014

coreboot@coreboot.org

45 participants
77 discussions

Investigating the high pitched noise on the x60 tablet
by Charles Devereaux 06 Jun '14

06 Jun '14

Hello Now that I have a working coreboot (sadly without the irda and wacom part - cf next message), I would like to investigate the whining noise issue. I have a spare motherboard that I'm setting up for studying this noise issue by pinpointing from which component it comes from - BTW how would it be possible to have an autopower on option ? I mean, as soon as the AC adapter is connecter, start booting - because I don't have a spare keyboard for this spare motherboard :-) Some remarks on a X60t using a SSD ie quite silent : - I have tried physically removing the modem - this introduces a similar (but less intense) noise using the default bios - with the x60t on an ultrabase and coreboot, the same noise is heard until say 30 minutes, then it become silent - I suppose because of the fan turning on due to the high temperature or automatic power saving features (acpi -t report 52 C and 55 C while the CPU load is almost 0) - What's more interesting is then, on this silent X60t, running rmmod uhci_hcd changes nothing but doing insmod uhci_hcd after that reintroduces the noise !! - Even better, as reported on http://www.kernelconcepts.de/~nils/ibm-x60.html, the UHCI interaction with ACPI C3 has been a problem in the past : >"Since 2.6.24 has been released I tried it with some interesting results... > >The new power saving features like cpuidle and AC97 suspend did not show any >results - at first. The reason was that the CPU did almost never enter C3 when idle >which cause additional 3W (!) of power drain. > >The reason is seemingly a change in the USB UHCI - if I remove uhci_hcd the >CPU goes to C3 again. Strangely this was not necessary with 2.6.22 :(" I will try to read the old patches - maybe the current day uhci module is not playing nice with acpi on the X60 - for example, going into the adequate power saving mode only when some specific condition happens (like on the ultrabase), but by default going into a power saving mode that make this noise. There are interesting suggestions on http://www.thinkwiki.org/wiki/Problem_with_high_pitch_noises If someone else is interested in making coreboot work perfectly on the x60tablet, I would be willing to donate a working motherboard (with wifi module) Charles

1 0

smi handler support for fsp baytrail
by jstkf2012＠126.com 06 Jun '14

06 Jun '14

Hi all, What about the smi support for fsp baytrail?When I select HAVE_SMI_HANDLER for fsp baytrail,it will halt at: ERROR: Could not find FSP HOB pointer in CBFS! POST: 0x79 POST: 0x9c ACPI: Writing ACPI tables at f0000. ACPI: * FACS @ 000f0210 Length 40ACPI: * DSDT @ 000f0250 Length 2a89SCI is IRQ9 ACPI: added table 1/32, length now 40 ACPI: * FADT @ 000f2ce0 Length f4ACPI: added table 2/32, length now 44 ACPI: * HPET @ 000f2de0 Length 38 ACPI: added table 3/32, length now 48 ACPI: * MADT @ 000f2e20 Length 6c ACPI: added table 4/32, length now 52 ACPI: * MCFG @ 000f2e90 Length 3c ACPI: Could not find CBMEM GNVS ACPI: Patching up global NVS in DSDT at offset 0x009f -> 000f2ed0 Thanks, Tank

2 1

VIA Board
by Reimu Hakurei 06 Jun '14

06 Jun '14

Hello, I have a server system that runs a VIA processor and I'm not sure what board it has. From dmidecode, I get a Phoenix Technologies BIOS (v6.00 PG) with a CN700-8237 chipset (appears to be supported?). The processor is a VIA Eden (Linux reports Esther, but BIOS reports Eden) at 800MHz. lspci -tvnn returns: -[0000:00]-+-00.0 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] +-00.1 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314] +-00.2 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314] +-00.3 VIA Technologies, Inc. PT890 Host Bridge [1106:3208] +-00.4 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314] +-00.7 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314] +-01.0-[01]----00.0 VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] [1106:3344] +-09.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] +-0a.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] +-0b.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] +-0f.0 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] +-10.0 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.1 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.3 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.4 VIA Technologies, Inc. USB 2.0 [1106:3104] \-11.0 VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] superiotool returns for a Super I/O chip: Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83697SF/UF/UG (id=0x68, rev=0x11) at 0x2e flashrom -p internal -V: Command line (3 args): flashrom -p internal -V Calibrating delay loop... OS timer resolution is 2 usecs, 265M loops per second, 10 myus = 12 us, 100 myus = 101 us, 1000 myus = 998 us, 10000 myus = 10085 us, 8 myus = 9 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "CN700-8237" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "VIA VT8237(R)" with PCI ID 1106:3227. Enabling flash write... OK. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49(H)F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F080T, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ESMT F49B002UA, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0xffff, id2 0x00ff Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x49, id2 0x44, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x49, id2 0x44, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x25, id2 0x8a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xbb, id2 0xb3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x8b, id2 0xfa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring PCI config space for 00:11:0 reg 0x59 Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41 I can try to take the system apart again to see if I can find any serial numbers on the mainboard, but it's a very small system and I don't remember seeing anything that wasn't obscured by the network card(s?). Thanks for any help!

1 0

VIA Board
by Reimu Hakurei 06 Jun '14

06 Jun '14

1 0

7" tablet devices
by Karl Schmidt 05 Jun '14

05 Jun '14

There are some Intel atom core devices - Looking at the supported device list, I don't even see a category for any of these. I'm guessing that at this time there isn't any chance to find something coreboot might support? -------------------------------------------------------------------------------- Karl Schmidt EMail Karl(a)xtronics.com Transtronics, Inc. WEB http://secure.transtronics.com 3209 West 9th Street Ph (785) 841-3089 Lawrence, KS 66049 FAX (785) 841-0434 If you wait for luck, you will not find wealth. It is up to you to work hard and smart to create wealth. kps --------------------------------------------------------------------------------

1 0

XHCI device disconnect on S3 standby
by Matt DeVillier 05 Jun '14

05 Jun '14

Greetings, I'm unable to use any USB devices connected to an XHCI controller to resume from S3 standby, as something causes all connected devices to disconnect just prior to entering standby, as per the output of dmesg. I've traced the relevant sections in the southbridge and ACPI source for my device (a haswell-based ChromeOS device with an Intel lynxpoint southbridge), but have been unable to find the culprit. CONFIG_FINALIZE_USB_ROUTE_XHCI is set, as this device only has USB3 ports (4x), but having it set either way doesn't make a difference. The usb_xhci_sleep_prepare() call doesn't seem to be the culprit, as commenting it out has no (positive) effect. Resuming via the power switch or wake on lan work perfectly, so it's not a general resuming issue. Appreciate any pointers on how to proceed cheers, Matt

3 2

Re: [coreboot] Intel FSP on Bayley Bay CRB: No output
by Martin Roth 04 Jun '14

04 Jun '14

Heh, Yep, I'm definitely not a lawyer - I wasn't trying to express this as a fact - I tried to make it clear that this was just my understanding of the current situation. I think that using a BSD header on the files that include the microcode could be fine - I really don't know. It's a stupidly simple file. I've been talking with Intel about it, but I'm not sure that they really want to GPL their microcode. I'd imagine that getting permission to do that would involve a *BUNCH* of lawyers, and what would the implications of doing that be? I'm also not sure what the implications of just changing the headers on the files are... Couldn't someone challenge us doing that? It seems tricky... I'm pretty uncomfortable with the whole situation - that's why I was thinking that just making a utility that turns the microcode files into binaries might be the best solution, but I don't know.... Martin On 06/04/2014 03:04 PM, ron minnich wrote: > > > > On Wed, Jun 4, 2014 at 1:57 PM, Martin Roth <martin.roth(a)se-eng.com > <mailto:martin.roth@se-eng.com>> wrote: > > There are a number of issues here: > > > > 3) The way that the microcode is currently being included is (to > my understanding) completely against the Intel licensing. We're > compiling a .h file with a license that says that it *CANNOT* be > made GPL into a file with a GPL header. > > > you're not a lawyer, thank goodness. I'm not either. But can't we > solved this problem by putting a bsd header onto that file, rather > than going with blobs? Or, better still, talking to intel about the > problem, rather than jumping over lots of hurdles to solve a problem > that may not exist? > > ron

1 0

Re: [coreboot] Intel FSP on Bayley Bay CRB: No output
by ron minnich 04 Jun '14

04 Jun '14

On Wed, Jun 4, 2014 at 11:59 AM, WANG FEI <wangfei.jimei(a)gmail.com> wrote: > I thought microcode files are kind of patches for CPU, it suppose to be > loaded before MRC just in case it fixes any issues related with CPU. I > actually did encounter an system random halt issue related with no loading > microcode before MRC training. > > > Yes, running modern x86 CPUs without microcode updates is really asking for trouble. ron

1 0

compiling error with fsp_baytrail's asl code
by jstkf2012＠126.com 04 Jun '14

04 Jun '14

Hi all, There is something wrong with fsp_baytrail's asl code, as shown below: "dsdt.ramstage.asl 24: Store (0, TRP0) Error 4064 - Object does not exist ^ (TRP0) dsdt.ramstage.asl 970: FixedDMA (0x10, 0x0, Width32Bit, ) Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG dsdt.ramstage.asl 1018: FixedDMA (0x10, 0x0, Width32Bit, ) Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG dsdt.ramstage.asl 1066: FixedDMA (0x10, 0x0, Width32Bit, ) Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) Error 4065 - ^ Object not found or not accessible from scope (^RBUF) dsdt.ramstage.asl 1071: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS) dsdt.ramstage.asl 1073: Return (^RBUF) Error 4065 - ^ Object not found or not accessible from scope (^RBUF) dsdt.ramstage.asl 1114: FixedDMA (0x10, 0x0, Width32Bit, ) Error 4096 - ^ syntax error, unexpected PARSEOP_NAMESEG dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) Error 4065 - ^ Object not found or not accessible from scope (^RBUF) dsdt.ramstage.asl 1119: CreateDwordField (^RBUF, ^BAR0._BAS, RBAS) Error 4065 - ^ Object not found or not accessible from scope (^BAR0._BAS) dsdt.ramstage.asl 1121: Return (^RBUF) Error 4065 - ^ Object not found or not accessible from scope (^RBUF) dsdt.ramstage.asl 1148: Device } Error 4096 - ^ syntax error, unexpected PARSEOP_DEVICE, expecting $end " Thanks, Tank

6 5

Re: [coreboot] IMB-A180 based design - help with post codes - success!
by Mark C. Mason 04 Jun '14

04 Jun '14

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot June 2014