coreboot May 2006

coreboot@coreboot.org

50 participants
101 discussions

[LinuxBIOS] PCI: 00:00.0 cmd <-146
by steve yannalfo 26 May '06

26 May '06

PCI: 00:00.0 subsytem <- 00/00 PCI: 00:00.0 cmd <-146 This is the last message i see booting LB. Everything looks OK to this point. (devices are correct BUS:Device.func) My board is similar to tyan/s2891 amdk8 LTD 0 -> CK804 -> W83627thf I have tried "getpir" to create a new irq_tables.c but it Segmentation faults after Validating. I don't know if my resourcemap.c & mptable.c is correct or where to get the proper info for them. I just copied the files from tyan/s2891. Does anyone have any suggestions? thank you. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

Re: [LinuxBIOS] [OLPC-devel] Linux "bootloader" image - build instructions?
by Carl-Daniel Hailfinger 25 May '06

25 May '06

Hi Steven, Goodrich,Steven wrote: > In order to get an image I can build/test with: > Where can I find instructions and a component list for the "bootloader" > Linux image (in the ROM)? this question is best asked on the LinuxBIOS list. I think Ron Minnich has the most current ROM image for OLPC. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[LinuxBIOS] linux bios hang when jump in kernel
by Neil 25 May '06

25 May '06

Dear all : My linuxbios can jump to kernel now ,but it hang then ,and can't enter in OS. Use phoenix bios ============================== ===== ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device 11, VID=1166, DID=0214 PCI_IDE: chipset revision 0 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio PCI_IDE: simplex device: DMA disabled ide1: PCI_IDE Bus-Master DMA disabled (BIOS) PCI_IDE: unknown IDE controller on PCI bus 01 device 70, VID=1166, DID=024b PCI_IDE: chipset revision 0 PCI_IDE: 100% native mode on irq 5 ide2: BM-DMA at 0x3000-0x3007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x3008-0x300f, BIOS settings: hdg:pio, hdh:pio PCI_IDE: unknown IDE controller on PCI bus 01 device 71, VID=1166, DID=024b PCI_IDE: chipset revision 0 PCI_IDE: 100% native mode on irq 5 ide4: BM-DMA at 0x3020-0x3027, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0x3028-0x302f, BIOS settings: hdk:pio, hdl:pio hda: WDC WD400BB-00FJA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M ................................... Use linuxbios ====================================================== PCI_IDE: unknown IDE controller on PCI bus 00 device 11, VID=1166, DID=0214 PCI_IDE: chipset revision 0 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x4010-0x4017, BIOS settings: hda:pio, hdb:pio PCI_IDE: simplex device: DMA disabled ide1: PCI_IDE Bus-Master DMA disabled (BIOS) hda: C/H/S=0/0/0 from BIOS ignored hda: WDC WD400BB-00FJA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Then it hang here . could anyone tell me whant is the problem ? Thank you . Neil

4 7

[LinuxBIOS] gcc version
by Russell Whitaker 25 May '06

25 May '06

The other day there was a comment about a gcc-3.3 bug, so ran abuild using gcc-3.4.6 on a i686-pc. Made a diff of the result with the web page's abuild log. Deleted pairs of successes. Result is attachment. Conclusion: 3.4.6 should work ok russ

1 0

[LinuxBIOS] Compressing the OLPC VSM?
by Carl-Daniel Hailfinger 24 May '06

24 May '06

Hi, the VSM Ron mailed yesterday to olpc-devel can be compressed very well to under 32 kb. 65536 vsa_test.64k-0001.bin 35587 vsa_test.64k-0001.bin.nrv2b 32143 vsa_test.64k-0001.bin.lzma Is the VSM executed after RAM is there and can we use compression for it? 50% savings are really good. Regards, Carl-Daniel -- http://www.hailfinger.org/

5 12

Re: [LinuxBIOS] selection of compression algorithm
by Lu, Yinghai 24 May '06

24 May '06

Copy_and_run is used by CAR and included in cache_as_ram_auto.c and compiled with gcc. That should be changed to use lzma easily. CONFIG_COMPRESSED_ROM_STREAM is used for pay load. --- stream_init will do the uncompressed. ( stream_init is in ram) CONFIG_COMPRESS is for linuxbios_ram.rom --- copy_and_run will do the uncompress. ( copy_and_run is ROM, and used ram as stack and local variable) You may create one file only that is corresponding to lib/nrv2b.c... YH -----Original Message----- From: linuxbios-bounces(a)linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Carl-Daniel Hailfinger Sent: Monday, May 22, 2006 12:29 PM To: yhlu Cc: Stefan Reinauer; LinuxBIOS Subject: Re: [LinuxBIOS] selection of compression algorithm > On 5/22/06, Stefan Reinauer <stepan(a)coresystems.de> wrote: >> We never actually compile nrv2b with romcc, do we? At the point we run >> nrv2b ram has to be enabled anyways - we uncompress the code somewhere. >> So our limits are far bigger than that. yhlu wrote: > in crt0.s, and it is used to uncompress linuxbios_ram when using romcc. You mean copy_and_run() is compiled with romcc? Can we change that? What's the difference between CONFIG_COMPRESSED_ROM_STREAM and CONFIG_COMPRESS? Can we use lzma compression for both? Regards, Carl-Daniel -- http://www.hailfinger.org/ -- linuxbios mailing list linuxbios(a)linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios

5 12

[LinuxBIOS] [Report] Revision 2307 broke 4 targets
by Carl-Daniel Hailfinger 24 May '06

24 May '06

This is a half-automatically generated report. If you are the author of this patch, please fix it up. Author: rminnich Date: 2006-05-18 05:07:16 +0200 (Thu, 18 May 2006) New Revision: 2307 Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_gx2/vsmsetup.c trunk/LinuxBIOSv2/src/lib/nrv2b.c trunk/LinuxBIOSv2/src/mainboard/amd/rumba/Options.lb trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Options.lb trunk/LinuxBIOSv2/src/stream/rom_stream.c trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb Log: cleanup some of the compressed rom stream ugliness -- more to do! olpc and rumba can now boot linux out of flash. vsa was resized to 64K. olpc and rumba now used compressed payload -- thanks stefan! ERRORS: New in revision 2307: Processing mainboard/broadcom/blast (i386: ok, we're amd64) Creating config file... ok Creating builddir...ok - Compiling image ..ok. + Compiling image ..FAILED! Log excerpt: +crt0.S:(.rom.text+0x500f): undefined reference to `printk_debug' +collect2: ld returned 1 exit status +make[1]: *** [linuxbios] Error 1 +make[1]: Leaving directory `/srv/svn/linuxbios-extra/tmp/LinuxBIOSv2/util/abuild/linuxbios-builds/broadcom_blast/normal' +make: *** [normal/linuxbios.rom] Error 1 Processing mainboard/tyan/s2735 (i386: ok, we're amd64) Creating config file... ok Creating builddir...ok - Compiling image ..ok. + Compiling image ..FAILED! Log excerpt: +crt0.S:(.rom.text+0x1e7f): undefined reference to `printk_debug' +collect2: ld returned 1 exit status +make[1]: *** [linuxbios] Error 1 +make[1]: Leaving directory `/srv/svn/linuxbios-extra/tmp/LinuxBIOSv2/util/abuild/linuxbios-builds/tyan_s2735/normal' +make: *** [normal/linuxbios.rom] Error 1 Processing mainboard/tyan/s2891 (i386: ok, we're amd64) Creating config file... ok Creating builddir...ok - Compiling image ..ok. + Compiling image ..FAILED! Log excerpt: +crt0.S:(.rom.text+0x32e3): undefined reference to `printk_debug' +collect2: ld returned 1 exit status +make[1]: *** [linuxbios] Error 1 +make[1]: Leaving directory `/srv/svn/linuxbios-extra/tmp/LinuxBIOSv2/util/abuild/linuxbios-builds/tyan_s2891/normal' +make: *** [normal/linuxbios.rom] Error 1 Processing mainboard/tyan/s2895 (i386: ok, we're amd64) Creating config file... ok Creating builddir...ok - Compiling image ..ok. + Compiling image ..FAILED! Log excerpt: +crt0.S:(.rom.text+0x350b): undefined reference to `printk_debug' +collect2: ld returned 1 exit status +make[1]: *** [linuxbios] Error 1 +make[1]: Leaving directory `/srv/svn/linuxbios-extra/tmp/LinuxBIOSv2/util/abuild/linuxbios-builds/tyan_s2895/normal' +make: *** [normal/linuxbios.rom] Error 1 -- http://www.hailfinger.org/

1 0

[LinuxBIOS] wiki access and commit rights
by Carl-Daniel Hailfinger 24 May '06

24 May '06

Hi, is there any process to get commit rights or are they only reserved for a core team? I'd like to work on integrating lzma compression support in the following weeks. After that, I plan to add support for a few SuperIO chips found on Asus boards. Regards, Carl-Daniel

3 7

Re: [LinuxBIOS] co processor support and other
by Lu, Yinghai 22 May '06

22 May '06

Yes. That is very interesting... 1. Some guys is trying to use HTX connector to add co-processor card. 2. Some guys is using GPU on PCI-E... Current code treat that coproc as one extra HT chain... YH ________________________________ From: linuxbios-bounces(a)linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Justin C. Darby Sent: Monday, May 22, 2006 7:21 AM To: Stefan Reinauer Cc: linuxbios(a)linuxbios.org; Steve Casselman; Lu, Yinghai Subject: Re: [LinuxBIOS] co processor support and other I think he's talking about enabling the use of: http://www.drccomputer.com/pages/products.html with the board. That chip has already had my interest for awhile. :) Justin On 5/22/06, Stefan Reinauer <stepan(a)coresystems.de> wrote: * Lu, Yinghai <yinghai.lu(a)amd.com> [060518 19:16]: > Just check in > 1. r2308: Option CONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST > It decides use onboard VGA or add on vga adapter > 2. r2309: reduce clear ECC time from 2.1x to 1.1x. need to enable > SERIAL_CPU_INIT > 3. r2310: enable ht chain for drc co processor in s2891. > > Please check that. > > Steve, > I still wonder how do you init the memory on your co processor without > the spd rom access. ( hard coded) What coprocessor is that? A Xilinx FPGA? Are 2891 delivered with those per default? Can LinuxBIOs fuel them with code now? This sounds _very_ interesting. Stefan -- coresystems GmbH * Brahmsstr. 16 * D-79104 Freiburg i. Br. Tel.: +49 761 7668825 * Fax: +49 761 7664613 Email: info(a)coresystems.de * http://www.coresystems.de/ -- linuxbios mailing list linuxbios(a)linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios

1 0

[LinuxBIOS] co processor support and other
by Lu, Yinghai 22 May '06

22 May '06

Just check in 1. r2308: Option CONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST It decides use onboard VGA or add on vga adapter 2. r2309: reduce clear ECC time from 2.1x to 1.1x. need to enable SERIAL_CPU_INIT 3. r2310: enable ht chain for drc co processor in s2891. Please check that. Steve, I still wonder how do you init the memory on your co processor without the spd rom access. ( hard coded) Thanks Yinghai Lu

3 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot May 2006