SeaBIOS

seabios@seabios.org

3783 discussions

[PATCH v2 0/3] seabios: add serial console support
by Gerd Hoffmann 06 Jul '16

06 Jul '16

Hi, Next round of patches. Changes: * Moved it all to a new sercon.c file. * Code maps cp437 to utf8 now, giving a much nicer display. Compare "Use the ↑ and ↓ keys to change the selection." (this series) with "Use the ^ and v keys to change the selection." (sgabios) ;-) * Simplified keyboard code, using enqueue_key now. * Restructed code, to cleanup things and to address review comments. cheers, Gerd Gerd Hoffmann (3): std: add cp437 to unicode map kbd: make enqueue_key public, add ascii_to_keycode add serial console support Makefile | 2 +- src/clock.c | 1 + src/kbd.c | 17 +- src/misc.c | 2 + src/optionroms.c | 4 +- src/sercon.c | 545 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/std/cp437.h | 258 ++++++++++++++++++++++++++ src/util.h | 5 + 8 files changed, 831 insertions(+), 3 deletions(-) create mode 100644 src/sercon.c create mode 100644 src/std/cp437.h -- 1.8.3.1

4 13

[RFC PATCH 0/2] seabios: add serial console support
by Gerd Hoffmann 05 Jul '16

05 Jul '16

Hi, Ok folks, finally took the time to put serial console support into seabios natively, without requiring sgabios. For now this will use the first serial port in case no vgabios was found, i.e. use something along the lines of "qemu -vga none -serial stdio" to check it out. Design goal is to print as few control sequences as possible, so you get readable logs when writing serial output to a file, but still allow enough control that boot loader menus etc. can be used interactively. The patches reached the first milestone now, you can boot into grub2 and use the builtin editor. And unlike sgabios it will not go crazy in case you try to move around the cursor quickly by holding down keys and let autorepeat kick in. ipxe command line editor worked too on a quick test. known issues / todo list: * isolinux/pxelinux seems to have trouble with this. * add support for sending output to both vga and serial. * add compile time config option. * add runtime config option. * figure reasonable plan for transition from sgabios. enjoy, Gerd Gerd Hoffmann (2): serial console, output serial console, input src/clock.c | 1 + src/misc.c | 2 + src/optionroms.c | 4 +- src/serial.c | 595 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/util.h | 3 + 5 files changed, 604 insertions(+), 1 deletion(-) -- 1.8.3.1

3 21

[PATCH v2 0/4] support booting more than 255 CPUs with QEMU
by Igor Mammedov 28 Jun '16

28 Jun '16

Changelog since: v1: * s/count_cpu/apic_id_init/ * merge handle_x2apic() into apic_id_init() RFC: * move out max-cpus check out of mptable_setup() * factor out CPU counting/apic ID detection in separate function * return back accidentially deleted debug message with APIC ID * drop unused code in smp_setup() According to SDM, if CPUs have APIC ID more than 254 firmware should pass control to OS in x2APIC mode. This series adds x2APIC bootstrap initialization. QEMU side of x2APIC support: https://lists.gnu.org/archive/html/qemu-devel/2016-05/msg01094.html Igor Mammedov (3): paravirt: disable legacy bios tables in case of more than 255 CPUs support booting with more than 255 CPUs cleanup smp_setup() Kevin O'Connor (1): smp: refactor present CPU APIC ID detection and counting src/fw/paravirt.c | 6 ++++-- src/fw/smp.c | 57 ++++++++++++++++++++++++++++++++++++------------------- src/x86.h | 1 + 3 files changed, 42 insertions(+), 22 deletions(-) -- 1.8.3.1

5 15

[PATCH 0/2] virtio: pci cfg access
by Gerd Hoffmann 20 Jun '16

20 Jun '16

Hi, I'm sure I had sent this before, but appearently totally forgot about it. Just tested booting with virtio bars mapped above 4G, didn't work. Investigated, found this bitroting in a local branch. Undusted it, rebased to latest master with some fixups, and here it is ... Gerd Hoffmann (2): virtio: uninline _vp_{read,write} virtio: pci cfg access src/hw/virtio-pci.c | 254 ++++++++++++++++++++++++++++++++++++++++++++++++---- src/hw/virtio-pci.h | 94 ++++--------------- 2 files changed, 252 insertions(+), 96 deletions(-) -- 1.8.3.1

2 4

[PATCH v2] fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL
by Haozhong Zhang 20 Jun '16

20 Jun '16

OS usually expects BIOS to set certain bits in MSR_IA32_FEATURE_CONTROL for some features (e.g. VMX and LMCE). QEMU provides a fw_cfg file "etc/msr_feature_control" to advise bits that should be set in MSR_IA32_FEATURE_CONTROL. If this file exists, SeaBIOS will set the advised bits in that MSR. Signed-off-by: Haozhong Zhang <haozhong.zhang(a)intel.com> --- Changes in v2: * Call msr_feature_control_setup() before smp_setup(). * Use wrmsr_smp() instead of wrmsr() on BSP. * Rename smp_mtrr and smp_mtrr_count to smp_msr and smp_msr_count as they are not only used for MTRR now. --- Makefile | 2 +- src/fw/msr_feature_control.c | 16 ++++++++++++++++ src/fw/paravirt.c | 3 ++- src/fw/smp.c | 20 ++++++++++---------- src/util.h | 3 +++ 5 files changed, 32 insertions(+), 12 deletions(-) create mode 100644 src/fw/msr_feature_control.c diff --git a/Makefile b/Makefile index 4930b3a..f38a075 100644 --- a/Makefile +++ b/Makefile @@ -43,7 +43,7 @@ SRC32FLAT=$(SRCBOTH) post.c e820map.c malloc.c romfile.c x86.c optionroms.c \ fw/paravirt.c fw/shadow.c fw/pciinit.c fw/smm.c fw/smp.c fw/mtrr.c fw/xen.c \ fw/acpi.c fw/mptable.c fw/pirtable.c fw/smbios.c fw/romfile_loader.c \ hw/virtio-ring.c hw/virtio-pci.c hw/virtio-blk.c hw/virtio-scsi.c \ - hw/tpm_drivers.c + hw/tpm_drivers.c fw/msr_feature_control.c SRC32SEG=string.c output.c pcibios.c apm.c stacks.c hw/pci.c hw/serialio.c DIRS=src src/hw src/fw vgasrc diff --git a/src/fw/msr_feature_control.c b/src/fw/msr_feature_control.c new file mode 100644 index 0000000..5ddc051 --- /dev/null +++ b/src/fw/msr_feature_control.c @@ -0,0 +1,16 @@ +#include "util.h" // msr_feature_control_setup, wrmsr_smp +#include "romfile.h" // romfile_find + +#define MSR_IA32_FEATURE_CONTROL 0x0000003a + +void msr_feature_control_setup(void) +{ + struct romfile_s *f = romfile_find("etc/msr_feature_control"); + if (!f) + return; + + u64 feature_control_bits; + f->copy(f, &feature_control_bits, sizeof(feature_control_bits)); + if (feature_control_bits) + wrmsr_smp(MSR_IA32_FEATURE_CONTROL, feature_control_bits); +} diff --git a/src/fw/paravirt.c b/src/fw/paravirt.c index 8ed4380..dbb3406 100644 --- a/src/fw/paravirt.c +++ b/src/fw/paravirt.c @@ -149,8 +149,9 @@ qemu_platform_setup(void) smm_device_setup(); smm_setup(); - // Initialize mtrr and smp + // Initialize mtrr, msr_feature_control and smp mtrr_setup(); + msr_feature_control_setup(); smp_setup(); // Create bios tables diff --git a/src/fw/smp.c b/src/fw/smp.c index 579acdb..6e706e4 100644 --- a/src/fw/smp.c +++ b/src/fw/smp.c @@ -10,7 +10,7 @@ #include "output.h" // dprintf #include "romfile.h" // romfile_loadint #include "stacks.h" // yield -#include "util.h" // smp_setup +#include "util.h" // smp_setup, msr_feature_control_setup #include "x86.h" // wrmsr #define APIC_ICR_LOW ((u8*)BUILD_APIC_ADDR + 0x300) @@ -20,20 +20,20 @@ #define APIC_ENABLED 0x0100 -static struct { u32 index; u64 val; } smp_mtrr[32]; -static u32 smp_mtrr_count; +static struct { u32 index; u64 val; } smp_msr[32]; +static u32 smp_msr_count; void wrmsr_smp(u32 index, u64 val) { wrmsr(index, val); - if (smp_mtrr_count >= ARRAY_SIZE(smp_mtrr)) { + if (smp_msr_count >= ARRAY_SIZE(smp_msr)) { warn_noalloc(); return; } - smp_mtrr[smp_mtrr_count].index = index; - smp_mtrr[smp_mtrr_count].val = val; - smp_mtrr_count++; + smp_msr[smp_msr_count].index = index; + smp_msr[smp_msr_count].val = val; + smp_msr_count++; } u32 MaxCountCPUs; @@ -58,10 +58,10 @@ handle_smp(void) u8 apic_id = ebx>>24; dprintf(DEBUG_HDL_smp, "handle_smp: apic_id=%d\n", apic_id); - // MTRR setup + // MTRR and MSR_IA32_FEATURE_CONTROL setup int i; - for (i=0; i<smp_mtrr_count; i++) - wrmsr(smp_mtrr[i].index, smp_mtrr[i].val); + for (i=0; i<smp_msr_count; i++) + wrmsr(smp_msr[i].index, smp_msr[i].val); // Set bit on FoundAPICIDs FoundAPICIDs[apic_id/32] |= (1 << (apic_id % 32)); diff --git a/src/util.h b/src/util.h index 7b41207..61877fa 100644 --- a/src/util.h +++ b/src/util.h @@ -103,6 +103,9 @@ int csm_bootprio_pci(struct pci_device *pci); // fw/mptable.c void mptable_setup(void); +// fw/msr_feature_control.c +void msr_feature_control_setup(void); + // fw/mtrr.c void mtrr_setup(void); -- 2.9.0

3 3

[PATCH] fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL
by Haozhong Zhang 17 Jun '16

17 Jun '16

OS usually expects BIOS to set certain bits in MSR_IA32_FEATURE_CONTROL for some features (e.g. VMX and LMCE). QEMU provides a fw_cfg file "etc/msr_feature_control" to advise bits that should be set in MSR_IA32_FEATURE_CONTROL. If this file exists, SeaBIOS will set the advised bits in that MSR. Signed-off-by: Haozhong Zhang <haozhong.zhang(a)intel.com> --- QEMU patch added fw_cfg file etc/msr_feature_control can be found at [1]. Note I mistakenly used u32 as the type of file content in that patch, which should be u64 and will be fixed. [1] https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg04389.html --- Makefile | 2 +- src/fw/msr_feature_control.c | 16 ++++++++++++++++ src/fw/paravirt.c | 3 +++ src/fw/smp.c | 6 +++++- src/util.h | 5 +++++ 5 files changed, 30 insertions(+), 2 deletions(-) create mode 100644 src/fw/msr_feature_control.c diff --git a/Makefile b/Makefile index 4930b3a..f38a075 100644 --- a/Makefile +++ b/Makefile @@ -43,7 +43,7 @@ SRC32FLAT=$(SRCBOTH) post.c e820map.c malloc.c romfile.c x86.c optionroms.c \ fw/paravirt.c fw/shadow.c fw/pciinit.c fw/smm.c fw/smp.c fw/mtrr.c fw/xen.c \ fw/acpi.c fw/mptable.c fw/pirtable.c fw/smbios.c fw/romfile_loader.c \ hw/virtio-ring.c hw/virtio-pci.c hw/virtio-blk.c hw/virtio-scsi.c \ - hw/tpm_drivers.c + hw/tpm_drivers.c fw/msr_feature_control.c SRC32SEG=string.c output.c pcibios.c apm.c stacks.c hw/pci.c hw/serialio.c DIRS=src src/hw src/fw vgasrc diff --git a/src/fw/msr_feature_control.c b/src/fw/msr_feature_control.c new file mode 100644 index 0000000..35d4ab8 --- /dev/null +++ b/src/fw/msr_feature_control.c @@ -0,0 +1,16 @@ +#include "util.h" // msr_feature_control_setup +#include "x86.h" // wrmsr +#include "romfile.h" // romfile_find + +u64 feature_control_bits; + +void msr_feature_control_setup(void) +{ + struct romfile_s *f = romfile_find("etc/msr_feature_control"); + if (!f) + return; + + f->copy(f, &feature_control_bits, sizeof(feature_control_bits)); + if (feature_control_bits) + wrmsr(MSR_IA32_FEATURE_CONTROL, feature_control_bits); +} diff --git a/src/fw/paravirt.c b/src/fw/paravirt.c index 8ed4380..640ee4c 100644 --- a/src/fw/paravirt.c +++ b/src/fw/paravirt.c @@ -153,6 +153,9 @@ qemu_platform_setup(void) mtrr_setup(); smp_setup(); + // Initialize MSR_IA32_FEATURE_CONTROL + msr_feature_control_setup(); + // Create bios tables pirtable_setup(); mptable_setup(); diff --git a/src/fw/smp.c b/src/fw/smp.c index 579acdb..8b57bf4 100644 --- a/src/fw/smp.c +++ b/src/fw/smp.c @@ -10,7 +10,7 @@ #include "output.h" // dprintf #include "romfile.h" // romfile_loadint #include "stacks.h" // yield -#include "util.h" // smp_setup +#include "util.h" // smp_setup, msr_feature_control_setup #include "x86.h" // wrmsr #define APIC_ICR_LOW ((u8*)BUILD_APIC_ADDR + 0x300) @@ -63,6 +63,10 @@ handle_smp(void) for (i=0; i<smp_mtrr_count; i++) wrmsr(smp_mtrr[i].index, smp_mtrr[i].val); + // MSR_IA32_FEATURE_CONTROL setup + if (feature_control_bits) + wrmsr(MSR_IA32_FEATURE_CONTROL, feature_control_bits); + // Set bit on FoundAPICIDs FoundAPICIDs[apic_id/32] |= (1 << (apic_id % 32)); diff --git a/src/util.h b/src/util.h index 7b41207..fc8e59d 100644 --- a/src/util.h +++ b/src/util.h @@ -103,6 +103,11 @@ int csm_bootprio_pci(struct pci_device *pci); // fw/mptable.c void mptable_setup(void); +// fw/msr_feature_control.c +#define MSR_IA32_FEATURE_CONTROL 0x0000003a +extern u64 feature_control_bits; +void msr_feature_control_setup(void); + // fw/mtrr.c void mtrr_setup(void); -- 2.9.0

2 3

How can I pass command line options to secondary payload?
by Dustin Brazeau 10 Jun '16

10 Jun '16

I am booting SeaBIOS as a payload of coreboot. I am then booting memtest86 as a secondary payload from SeaBIOS. It looks like memtest86 support command line options, but I can't figure out how to pass a command line to a secondary payload from SeaBIOS. Looks like it is somehow related to the multiboot option in SeaBIOS, which I have tried enabling, but I still can't figure out how add and pass a command line to a payload ran from SeaBIOS.

1 0

Re: [SeaBIOS] [coreboot] UEFI project ideas
by Laszlo Ersek 08 Jun '16

08 Jun '16

On 06/07/16 16:35, Zoran Stojsavljevic wrote: >> Note that you can build seabios as CSM for tianocore already. > > These are the opposites: SeaBIOS is CSM ON (emulates Leagcy BIOS), while > Tiano Core supposed to be CSM OFF (UEFI), Thus, SeaBIOS and Tiano Core > exclude each other (should not be used together -> wrong architecture). SeaBIOS can be built and used as a CSM with UEFI firmware built from tianocore/edk2. The projects themselves are not "opposites". The resultant firmware binary can boot OSes in UEFI mode or in legacy mode. I guess those boot modes can be called opposites. >> What is the point? You can just run tianocore as coreboot playload. > > The point is to make minimal Tiano Core (minimum for making FAT32 > partition/file system on HDD/SDD to create /boot/EFI/ directory, in > other words minimal UEFI compliant BIOS), Tiano Core as such is good to > be used/run for/on x86 architecture ONLY This is patently false. Several aarch64 platforms exist that run UEFI firmware based more or less directly on tianocore/edk2. In my living room I have an APM Mustang that has UEFI firmware, based on tianocore/edk2. The SBBR spec (Server Base Boot Requirements System Software on ARM ® Platforms) mandates UEFI. Of course, not all ARM platforms are required to conform to the SBBR, but the SBBR would be quite foolish to require a practically unfeasible thing. tianocore/edk2 is the open source reference implementation of PI (Platform Init) and UEFI. It's a separate question wheter specific aarch64 platform code lives directly within the edk2 tree, or in some external tree (open source or proprietary). > (and side effect is the > extended time for booting, since all these DXE drivers must be > installed, which will be later mostly replaced/run over with OS drivers, > except run time services). DXE drivers are supposed to drive peripherals only in the exceptional case. Most devices that are not integrated in the platform are supposed to be driven by UEFI drivers that conform to the UEFI Driver Model. The point of that driver model is that no compliant driver, when initially launched, starts to drive any kind of hardware. Instead, it installs only three callbacks (member functions of its driver binding protocol instance): supported, start, and stop. The supported callback is used as a very quick check by the system to see if a driver supports a given piece of hardware. The start and stop functions instruct the driver to actually bind (and unbind) the specified piece of hardware. The calls to the supported and bind functions are initiated by Platform BDS (Boot Device Selection). In other words, it is a platform decision to automatically bind this or that set of devices. In OVMF and ArmVirtPkg (running in QEMU, Xen, and possibly other virtual machines), we choose to automatically bind all possible devices, because in virt, that's generally the best approach (and it is even necessary for some QEMU boot order quirks that I'm not going to go into now). But, auto-binding all devices is nowhere mandated by the UEFI spec, or any other related spec. In fact, on some x86 platforms the vendor seeks to speed up the boot by not connecting USB keyboards even. (And then, if you want to use the USB keyboard before the OS is booted, for example for modifying firmware settings, you have to set a non-volatile UEFI variable from within the OS, sometimes displayed as "change firmware settings" or some such. Then at the next boot, the firmware will drop you into the setup TUI, with the keyboard (and possibly other devices) connected. The user can massage firmware settings then; e.g., if the platform vendor wants it too, the user may be able to add the USB keyboard to the set of auto-connected devices.) Other schemes exist too. The Platform Init specification (separate from the UEFI specification) defines the Boot Mode HOB (hand-off block). The HOB-producer phase of the firmware (usually: PEI, Pre-EFI Initialization) can produce this HOB, so that later phases of the firmware can key off of it. For example, dependent on platform hardware support, this HOB can tell the Boot Device Selection phase *not* to connect any other devices than the last time around, because the chassis has not been opened since. Otherwise, BDS might want to auto-connect everything (perhaps the user installed a new SSD, etc). > As such, Minimal Tiano Core (minimal UEFI compliant BIOS) could be used > on ARM architectures too, thus making ARM HW platforms also > compatible/lookalike as x86 UEFI compliant BIOS. The UEFI specification already contains AArch32 and AArch64 bindings. It is already possible to implement UEFI on ARM platforms, and several vendors have. Boot performance, as far as it is affected by the set of devices automatically connected, is platform policy. > In nutshell, then you can build PC/Laptop with ARM CPU/SoC HW platform, >From last September, a blog post from one of my colleagues: https://marcin.juszkiewicz.com.pl/2015/09/21/aarch64-desktop-day-one/ > having coreboot + minimal Tiano Core + WIN 10 Boot Loader + WIN10 on it > (since WIN10 BL does see UEFI compliance, not knowing what is really > under the hood). ;-) For the record, I am definitely not arguing against coreboot, or u-boot, or even a stripped down platform firmware built purely from tianocore/edk2. Still for the record, I'm also not arguing that people should move to UEFI *at all*, unless they have specific reasons. But claiming that tianocore/edk2 is only good for x86 in its current shape and form, and implying that UEFI on ARM unconditionally needs a lower-level "shim", are just preposterous. Laszlo

2 1

Re: [SeaBIOS] [coreboot] UEFI project ideas
by Martin Roth 08 Jun '16

08 Jun '16

Here's a patch to build the UEFI coreboot payload package directly as a coreboot payload. https://review.coreboot.org/#/c/15057/ Martin On Tue, Jun 7, 2016 at 1:13 PM, Zoran Stojsavljevic < zoran.stojsavljevic(a)gmail.com> wrote: > > I fail to see what you are trying to tell me. > > I'm not sure you even know what a CSM is. > > I probably do not. ;-) > > > And what has all this to do with seabios? > > Did I ever mention SeaBIOS to play minimal TianoCore? > > Thank you, > Zoran > > On Tue, Jun 7, 2016 at 5:18 PM, Gerd Hoffmann <kraxel(a)redhat.com> wrote: > >> On Di, 2016-06-07 at 16:35 +0200, Zoran Stojsavljevic wrote: >> > > Note that you can build seabios as CSM for tianocore already. >> >> > These are the opposites: SeaBIOS is CSM ON (emulates Leagcy BIOS), >> > while Tiano Core supposed to be CSM OFF (UEFI), Thus, SeaBIOS and >> > Tiano Core exclude each other (should not be used together -> wrong >> > architecture). >> >> I fail to see what you are trying to tell me. >> I'm not sure you even know what a CSM is. >> >> > > What is the point? You can just run tianocore as coreboot playload. >> >> > The point is to make minimal Tiano Core (minimum for making FAT32 >> > partition/file system on HDD/SDD to create /boot/EFI/ directory, in >> > other words minimal UEFI compliant BIOS), Tiano Core as such is good >> > to be used/run for/on x86 architecture ONLY (and side effect is the >> > extended time for booting, since all these DXE drivers must be >> > installed, which will be later mostly replaced/run over with OS >> > drivers, except run time services). >> >> > As such, Minimal Tiano Core (minimal UEFI compliant BIOS) could be >> > used on ARM architectures too, thus making ARM HW platforms also >> > compatible/lookalike as x86 UEFI compliant BIOS. >> >> tianocore already runs on arm. >> seabios doesn't and it never will. >> >> > In nutshell, then you can build PC/Laptop with ARM CPU/SoC HW >> > platform, having coreboot + minimal Tiano Core + WIN 10 Boot Loader + >> > WIN10 on it (since WIN10 BL does see UEFI compliance, not knowing what >> > is really under the hood). ;-) >> >> And what has all this to do with seabios? >> >> confused, >> Gerd >> >> > > -- > coreboot mailing list: coreboot(a)coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot >

1 0

Re: [SeaBIOS] [coreboot] UEFI project ideas
by Gerd Hoffmann 08 Jun '16

08 Jun '16

On Di, 2016-06-07 at 16:35 +0200, Zoran Stojsavljevic wrote: > > Note that you can build seabios as CSM for tianocore already. > These are the opposites: SeaBIOS is CSM ON (emulates Leagcy BIOS), > while Tiano Core supposed to be CSM OFF (UEFI), Thus, SeaBIOS and > Tiano Core exclude each other (should not be used together -> wrong > architecture). I fail to see what you are trying to tell me. I'm not sure you even know what a CSM is. > > What is the point? You can just run tianocore as coreboot playload. > The point is to make minimal Tiano Core (minimum for making FAT32 > partition/file system on HDD/SDD to create /boot/EFI/ directory, in > other words minimal UEFI compliant BIOS), Tiano Core as such is good > to be used/run for/on x86 architecture ONLY (and side effect is the > extended time for booting, since all these DXE drivers must be > installed, which will be later mostly replaced/run over with OS > drivers, except run time services). > As such, Minimal Tiano Core (minimal UEFI compliant BIOS) could be > used on ARM architectures too, thus making ARM HW platforms also > compatible/lookalike as x86 UEFI compliant BIOS. tianocore already runs on arm. seabios doesn't and it never will. > In nutshell, then you can build PC/Laptop with ARM CPU/SoC HW > platform, having coreboot + minimal Tiano Core + WIN 10 Boot Loader + > WIN10 on it (since WIN10 BL does see UEFI compliance, not knowing what > is really under the hood). ;-) And what has all this to do with seabios? confused, Gerd

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS