Is this a problem with the patch applied? It was tested on our hardware
* What hardware platform are you using?
* Does the numeric keyboard work if it is the only keyboard (or if you
swap ports, which hopefully changes enumeration order) in the system,
maybe the problem is elsewhere and was masked because the (normal)
keyboard was enumerated first and the second (numeric) was ignored earlier.
Also, the patch can be verified using qemu and two vnc inputs:
qemu-system-x86_64 -m 4096 -M q35 -smp 8 \
-pflash bios.qemu.rom \
-drive format=raw,file=disk.img \
-device pci-bridge,addr=12.0,chassis_nr=2,id=head.2 \
-device nec-usb-xhci,bus=head.2,addr=0f.0,id=usb.2 \
-device VGA,id=video.1 \
-device secondary-vga,bus=head.2,addr=02.0,id=video.2 \
-display vnc=:15,id=primary,display=video.1 \
-display vnc=:16,id=secondary,display=video.2 \
-device usb-kbd,bus=usb.2.0,port=1,display=video.1 \
-device usb-kbd,bus=usb.2.0,port=2,display=video.2 \
On 12/20/2017 06:20 PM, Daniel K wrote:
> When I have more than 2 usb keyboards connected, SeaBIOS doesn't register keyboard input.
> This persists even when I get to the disk GRUB menu.
> I have to manually unplug my other keyboard to do any input during boot.
> And by other keyboard, I just mean a separate numerical keypad.
>> From: SeaBIOS <seabios-bounces(a)seabios.org> on behalf of Kevin O'Connor <kevin(a)koconnor.net>
>> Sent: 20 December 2017 08:33
>> To: Stef van Os
>> Cc: seabios(a)seabios.org
>> Subject: Re: [SeaBIOS] [PATCH 0/1] add multiple usb-hid support
>> On Fri, Dec 15, 2017 at 11:09:45AM +0100, Stef van Os wrote:
>>> The following patch adds support for multiple usb keyboards and mice to seabios.
>>> Maximum number of keyboards is configurable in Kconfig and defaults to 1 to keep
>>> current behavior.
>> Thanks. What's the use case for enabling multiple keyboards?