This provides basic debug output on the Quark system, assuming that
*something* (i.e. coreboot or UEFI) has set it up in advance for us.
Signed-off-by: David Woodhouse <David.Woodhouse(a)intel.com>
---
I looked briefly at making this part of the CONFIG_DEBUG_SERIAL code,
and making that generic enough to handle I/O access *or* MMIO access
depending on what's present... but in fact that's probably overkill.
This isn't really limited to Quark; it would work with any 16550 device
wired up as MMIO32. But we can expand it as required, I think. No point
in starting off with the same functionality as the 5000-odd lines of the
Linux kernel's 8250_pci.c.
What do I need to do if called in 32-bit segmented mode? I'm guessing
that's not going to work right now...
src/Kconfig | 5 +++++
src/fw/csm.c | 2 ++
src/output.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 71 insertions(+)
diff --git a/src/Kconfig b/src/Kconfig
index a42ab2d..bdc2602 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -472,6 +472,11 @@ menu "Debugging"
Set to zero to disable debugging.
+ config DEBUG_QUARK_UART
+ depends on DEBUG_LEVEL != 0
+ bool "Debug to Quark UART #1"
+ default n
+
config DEBUG_SERIAL
depends on DEBUG_LEVEL != 0
bool "Serial port debugging"
diff --git a/src/fw/csm.c b/src/fw/csm.c
index dfb0d12..afd7ffe 100644
--- a/src/fw/csm.c
+++ b/src/fw/csm.c
@@ -280,6 +280,8 @@ handle_csm(struct bregs *regs)
if (!CONFIG_CSM)
return;
+ debug_serial_preinit();
+
dprintf(3, "handle_csm regs %p AX=%04x\n", regs, regs->ax);
pic_irqmask_write(PICMask);
diff --git a/src/output.c b/src/output.c
index b47625f..a90d350 100644
--- a/src/output.c
+++ b/src/output.c
@@ -17,6 +17,8 @@
#include "stacks.h" // call16_int
#include "string.h" // memset
#include "util.h" // ScreenAndDebug
+#include "hw/pci_regs.h" // PCI_VENDOR_ID, PCI_BASE_ADDRESS_0
+#include "hw/pci.h" // pci_config_readl
struct putcinfo {
void (*func)(struct putcinfo *info, char c);
@@ -31,9 +33,59 @@ struct putcinfo {
u16 DebugOutputPort VARFSEG = 0x402;
+static volatile u32 *quark_uart_addr = 0;
+
+extern void _cfunc32flat_quark_uart_preinit(void);
+extern void _cfunc32flat_quark_uart_putc(void);
+extern void _cfunc32flat_quark_uart_flush(void);
+
+void quark_uart_preinit(void)
+{
+ // debug port is bus 0, device 0x14, function 5.
+ u16 uart_bdf = pci_to_bdf(0, 0x14, 5);
+
+ // If it isn't a Quark UART...
+ if (pci_config_readl(uart_bdf, PCI_VENDOR_ID) != 0x09368086)
+ return;
+
+ u32 bar0 = pci_config_readl(uart_bdf, PCI_BASE_ADDRESS_0);
+ if (!(bar0 & 0xf))
+ quark_uart_addr = (void *)bar0;
+}
+
+void quark_uart_putc(char c)
+{
+ if (!quark_uart_addr)
+ return;
+
+ int timeout = DEBUG_TIMEOUT;
+ while ((quark_uart_addr[SEROFF_LSR] & 0x20) != 0x20)
+ if (!timeout--)
+ // Ran out of time.
+ return;
+ quark_uart_addr[SEROFF_DATA] = c;
+}
+
+void quark_uart_flush(void)
+{
+ if (!quark_uart_addr)
+ return;
+ int timeout = DEBUG_TIMEOUT;
+ while ((quark_uart_addr[SEROFF_LSR] & 0x60) != 0x60)
+ if (!timeout--)
+ // Ran out of time.
+ return;
+}
+
void
debug_serial_preinit(void)
{
+ if (CONFIG_DEBUG_QUARK_UART) {
+ if (MODE16)
+ call32(_cfunc32flat_quark_uart_preinit, 0, 0);
+ else
+ quark_uart_preinit();
+ }
if (!CONFIG_DEBUG_SERIAL)
return;
// setup for serial logging: 8N1
@@ -54,6 +106,12 @@ debug_serial_preinit(void)
static void
debug_serial(char c)
{
+ if (CONFIG_DEBUG_QUARK_UART) {
+ if (MODE16)
+ call32(_cfunc32flat_quark_uart_putc, c, 0);
+ else
+ quark_uart_putc(c);
+ }
if (!CONFIG_DEBUG_SERIAL)
return;
int timeout = DEBUG_TIMEOUT;
@@ -68,6 +126,12 @@ debug_serial(char c)
static void
debug_serial_flush(void)
{
+ if (CONFIG_DEBUG_QUARK_UART) {
+ if (MODE16)
+ call32(_cfunc32flat_quark_uart_flush, 0, 0);
+ else
+ quark_uart_flush();
+ }
if (!CONFIG_DEBUG_SERIAL)
return;
int timeout = DEBUG_TIMEOUT;
--
1.8.3.1
--
dwmw2
Hi,
qemu 1.7 is almost out of the door. I want update seabios early in the
1.8 devel cycle. Time to do resume the release planning since we've
scratched the idea to do a last-minute bios update for 1.7.
I'd like to see a seabios release from the master branch in december.
Ideally we'll put a prerelease into qemu before the final release so we
get some testing. We could either explicitly tag a release candidate or
just grab a snapshot for that.
Commit pending patches, enter seabios freeze, prepare seabios update for
qemu can be done next week I think. Then have 2-3 weeks freeze period,
tag final release before xmas. In case something doesn't go as planned
early january.
Pending patches:
* my ahci and pci patches sent this week.
* anything else?
How we wanna call the baby? 1.7.4? 1.8.0?
cheers,
Gerd
Hi,
Here is a collection of pci patches. The first two go clearly into
the bugfix category. Next two improve alignment a bit. Patch 5
adds some debug logging. Patch 6 adds etc/reserved-memory-end support.
cheers,
Gerd
Gerd Hoffmann (6):
pci: don't reorder entries when moving to 64bit list
pci: don't map usb host adapters above 4G
pci: align 64bit pci regions to 1G
pci: tweak + comment minimum allocations
pci: log pci windows
pci: map 64-bit BARs at location provided by emulator
src/fw/pciinit.c | 32 +++++++++++++++++++++++++-------
1 file changed, 25 insertions(+), 7 deletions(-)
--
1.8.3.1
Hi,
The ahci driver has recently been changed to run completely in 32bit mode.
This is a followup patch series for this, removing real mode memory
access macros not needed any more and also moving data structures out
of real mode address space.
cheers,
Gerd
Gerd Hoffmann (3):
ahci: zap real mode macros
ahci: remote some parentheses
ahci: alloc structs in high memory, simplify realloc
src/hw/ahci.c | 101 ++++++++++++++++++++++++----------------------------------
1 file changed, 41 insertions(+), 60 deletions(-)
--
1.8.3.1
