SeaBIOS December 2011

seabios@seabios.org

25 participants
64 discussions

Re: [SeaBIOS] [SeaBIOS PATCH v3] hotplug: Add device per func in ACPI DSDT tables
by Kevin O'Connor 11 May '12

11 May '12

On Tue, Dec 06, 2011 at 07:32:55PM -0500, Amos Kong wrote: > ----- Original Message ----- > > On Tue, Dec 06, 2011 at 01:39:35PM +0800, Amos Kong wrote: > > > Only func 0 is registered to guest driver (we can > > > only found func 0 in slot->funcs list of driver), > > > the other functions could not be cleaned when > > > hot-removing the whole slot. This patch adds > > > device per function in ACPI DSDT tables. > > > Notify only when func0 is added and removed. > > > > > > Have tested with linux/winxp/win7, hot-adding/hot-remving, > > > single/multiple function device, they are all fine(all > > > added devices can be removed). > > > > > This includes some bits I wrote but this is not an ack > > of the patch yet :) > > > > I find it surprising that this works: a function > > has _EJ0 so would not guest expect that ejecting > > a single one will only remove it, and not all functions? > > Removing single func is not supported by specific, and current code > (qemu/kernel pci driver) process hot-remove with the whole slot. > We could not hot-remove single func with/without this patch. > > Register _EJ0() for each func, then all the funcs will be record > into the function list of the slot. Just as an update - it's not clear to me what this patch does, and it seems like Michael had some concerns. Also, it doesn't seem right to hardcode the generation of that many devices (248) in the AML code. So, unless there are further comments I'm going to hold off on this patch. -Kevin

6 17

Seabios on Via pc2500e
by Elisenda Cuadros 07 Jan '12

07 Jan '12

Hello list, I´m trying to boot a Via pc2500e motherboard with coreboot and seabios (built from coreboot, stable). Everything is ok, I can see the bootmenu (I have only one hard disk at the moment), but when I press "1" it seems coreboot is restarting entering in a loop. Is this a normal behaviour? I tried attaching a bootorder file with cbfstool with same result. I attach you the log. Thanks in advance. Best regards, Elisenda

2 10

[Seabios] [PATCH 0/3] 64bit PCI BARs allocations
by Alexey Korolev 04 Jan '12

04 Jan '12

Hi, There were a number of requests about support of 64bit PCI BAR allocations. Also we have observed the issue on guests with older linux version (2.6.18): if we have a 64bit BAR allocated within first 4GB, the OS may hang during start process. (I guess it is an OS bug, but we need to take care of this). This patch addresses these two issues and allows 64bit BARs to be allocated in ranges above 4GB. Patch consists of three parts: 1. Add new range above 4GB in _CRS table to let Windows 2008 work properly. Thanks a lot to Michael S. Triskin for this brilliant idea. 2. Added new PCI_REGION_TYPE_PREFMEM_64 region type in pciinit and changed types of variables. 3. Take care about PCI devices with 64bit BARs on secondary buses. Patches have been tested on several configurations which includes linux 2.6.18 - 3.0 & windows 2008. Everything works quite well.

5 28

Re: [SeaBIOS] [PATCH RFC 0/7] VGA ROM improvements
by Kevin O'Connor 03 Jan '12

03 Jan '12

On Sat, Dec 17, 2011 at 04:44:52PM +0000, Julian Pidancet wrote: > Also, I implemented this vbe driver skeleton with an interface which > could be as generic as possible to allow to implement several > different drivers. But I am actually wondering now what would be the > best way for several drivers to share the same interface in terms of > code. That is an interesting issue. The current lgpl seems to use two schemes - the bochs vbe interface is inline with the standard vga interface and uses "#ifdef VBE" guards - the cirrus interface takes the int10 vector, checks for the calls it needs to handle and then calls the standard vga interface for the rest. A couple of years back, a geode interface was written for seabios - see the thread at (look for the code in attachments): http://www.coreboot.org/pipermail/coreboot/2009-August/051624.html I'm don't recall why the above didn't get merged. The Geode interface only needed to override the legacy timing parameter table and be called during init. I'm not sure which scheme makes the most sense. I could see using the "cirrus" scheme - each hardware type defines its own "handle_10" and "vga_post" in a file dedicated to that hardware, which then check for hardware specific functions and call "library" code for the standard stuff. However, I'm not sure how much code duplication there would be for things like the VBE calls which seem to contain a mix of standard info and hardware specific info. -Kevin

2 1

Re: [SeaBIOS] [Seabios] [PATCH 0/3] 64bit PCI BARs allocations
by Michael S. Tsirkin 29 Dec '11

29 Dec '11

On Thu, Dec 29, 2011 at 09:20:00AM +0000, Alexey Korolev wrote: > >> > > Patches have been tested on several configurations which includes > >> linux 2.6.18 - 3.0 & > >> windows 2008. Everything works quite well. > > >Which qemu version did you use? > I tried both 0.15 and 1.0 qemu or qemu-kcm?

2 1

USB keyboard and mouse not detected
by Nils 28 Dec '11

28 Dec '11

Hi all, I am having some problems with SeaBIOS from git (9-december-2011). My USB keyboard and USB mouse are not detected. EHCI and OHCI are being init but no further actions. I can not use my keyboard in SeaBIOS and Grub. USB keyboard and USB mouse are enabled in SeaBIOS .config . The Linux kernel does detect them and i can use them in Linux. I hope someone could give me some clue on what i am doing wrong. Also see attached SeaBIOS and kernel log's and .config . Thanks,Nils.

2 8

Re: [SeaBIOS] [PATCH 0/6] Misc VGA BIOS updates
by Nils 25 Dec '11

25 Dec '11

Hi Kevin, You wrote: >Over the last few days I've been looking through the vga bios code, >and I observed some areas for improvement. > >-Kevin > > >Kevin O'Connor (6): > vgabios: Define video_save_pointer_table layout. > vgabios: Minor - use segoff_s for static_functionality ptr. > vgabios: Extend information in internal vgamode_s struct. > vgabios: Use vgamode_s instead of video_param_table in code. > vgabios: Generate video_param_table at runtime. > vgabios: Place a signature at offset 0x1e of the rom. With that patchset i get following error: Compiling whole program out/vgaccode.16.s vgasrc/vgatables.c: In function 'build_video_param': vgasrc/vgatables.c:66: warning: implicit declaration of function 'memcpy_far' src/util.c:163: note: previous definition of 'memcpy_far' was here vgasrc/vgatables.c:66: error: incompatible implicit declaration of function 'memcpy_far' src/util.c:163: note: previous definition of 'memcpy_far' was here make: *** [out/vgaccode.16.s] Error 1 Thanks, Nils.

2 2

SeaBIOS GIT compile errors
by Nils 25 Dec '11

25 Dec '11

Hi all, I was trying to test the latest vga patches but i encountered several compile errors. These are the errors i get when i compile vanilla SeaBIOS GIT: Compiling whole program out/vgaccode.16.s vgasrc/clext.c: In function 'cirrus_extbios_80h': vgasrc/clext.c:438: error: dereferencing pointer to incomplete type vgasrc/clext.c:441: error: dereferencing pointer to incomplete type vgasrc/clext.c:443: error: dereferencing pointer to incomplete type vgasrc/clext.c:444: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_81h': vgasrc/clext.c:452: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_82h': vgasrc/clext.c:460: error: dereferencing pointer to incomplete type vgasrc/clext.c:461: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_85h': vgasrc/clext.c:467: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_9Ah': vgasrc/clext.c:473: error: dereferencing pointer to incomplete type vgasrc/clext.c:474: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_A0h': vgasrc/clext.c:488: error: dereferencing pointer to incomplete type vgasrc/clext.c:489: error: dereferencing pointer to incomplete type vgasrc/clext.c:490: error: dereferencing pointer to incomplete type vgasrc/clext.c:491: error: dereferencing pointer to incomplete type vgasrc/clext.c:491: error: dereferencing pointer to incomplete type vgasrc/clext.c:491: error: dereferencing pointer to incomplete type vgasrc/clext.c:491: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_A1h': vgasrc/clext.c:497: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_A2h': vgasrc/clext.c:503: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios_AEh': vgasrc/clext.c:509: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_extbios': vgasrc/clext.c:516: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_vesa_not_handled': vgasrc/clext.c:638: error: dereferencing pointer to incomplete type vgasrc/clext.c: In function 'cirrus_vesa': vgasrc/clext.c:644: error: dereferencing pointer to incomplete type make: *** [out/vgaccode.16.s] Error 1 Thanks,Nils.

2 2

Re: [SeaBIOS] Updated Geode vga bios
by Nils 24 Dec '11

24 Dec '11

Hi Kevin, you wrote: >I went through the latest Geode VGA BIOS patch and updated it to merge >with the current tree. I also fixed it up so that it doesn't need to >modify the common code. > >Unfortunately, I have no ability to test this code. So, I don't know >if it works properly. Hopefully someone with the hardware can run a >test. The last weeks the VGA code is changing rapidly, very nice. Thanks to all involved. I use a patched version that was almost ready to send.(just a little cleanup) I will look at your patch and adapt it to Geode GX2. I can only test on GX2, i don't have a LX but it only needs some minor patching. Thanks,Nils.

1 0

Updated Geode vga bios
by Kevin O'Connor 24 Dec '11

24 Dec '11

I went through the latest Geode VGA BIOS patch and updated it to merge with the current tree. I also fixed it up so that it doesn't need to modify the common code. Unfortunately, I have no ability to test this code. So, I don't know if it works properly. Hopefully someone with the hardware can run a test. -Kevin

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS December 2011