And with verbose logging (level 8).
[...] |dfbf9000| USB MSC vendor='WD' product='Elements 10B8' rev='1012' type=0 removable=0 |dfbf9000| scsi_is_ready (drive=0x000f5c40) |dfbf9000| ehci_send_pipe qh=0x0009ed80 dir=0 data=0xdfbf9e45 size=31 |dfbfe000| ehci_send_pipe qh=0x0009ef00 dir=128 data=0xdfbfeed2 size=18 |dfbf9000| ehci_send_pipe qh=0x0009ee00 dir=128 data=0xdfbf9e38 size=13 |dfbfe000| ehci_send_pipe qh=0x0009ef00 dir=128 data=0xdfbfee38 size=13 |dfbf9000| ehci_send_pipe qh=0x0009ed80 dir=0 data=0xdfbf9e45 size=31 |dfbfe000| Device reports MEDIUM NOT PRESENT |dfbfe000| scsi_is_ready returned -1 |dfbfe000| Unable to configure USB MSC drive. |dfbfe000| phys_free f5c70 (detail=0xdfc08fe0) |dfbfe000| Unable to configure USB MSC device. |dfbfe000| phys_free dfc090f0 (detail=0xdfc090c0) |dfbfe000| phys_free dfc05400 (detail=0xdfc04e40) \dfbfe000/ End thread phys_free dfbfe000 (detail=0xdfc04e10) |dfbf9000| ehci_send_pipe qh=0x0009ee00 dir=128 data=0xdfbf9ed2 size=18 |dfc02000| ehci_free_pipes 0xdfc057b0 |dfbf9000| ehci_send_pipe qh=0x0009ee00 dir=128 data=0xdfbf9e38 size=13 |dfc02000| phys_free dfc08f00 (detail=0xdfc08f70) |dfc02000| phys_free 9ee80 (detail=0xdfc09060) |dfc02000| phys_free 9ef00 (detail=0xdfc09090) Wcall16 with invalid stack [hangs here]
On Wed, Dec 23, 2015 at 4:05 PM, Tobias Diedrich tobiasdiedrich@gmail.com wrote:
Hi,
I've attached a WD Elements 2TB drive to my pcengines APU1 as external storage and just found that with the disk attached SeaBIOS crashes on boot. :/ The controller is USB2, not USB3.
Both the stock rom "Build 4/5/2014 (current production)" and a self-compiled coreboot rom with SeaBIOS master from git (rel-1.9.0-43-g76327b9) exhibit the same issue.
I'm not sure if http://www.seabios.org/pipermail/seabios/2015-November/009910.html is the same issue since it doesn't have log messages and doesn't seem to complain about it not booting at all.
Cheers, Tobias
-
Tobias Diedrich