Re: [SeaBIOS] [PATCH 01/15] Access DC registers via geode_mem[Read|Write]

[Christian Gmeiner]

2012/9/2 Christian Gmeiner :
> Am 02.09.2012 21:50 schrieb "Kevin O'Connor" :
> > On Sun, Sep 02, 2012 at 09:02:05PM +0200, Christian Gmeiner wrote:
> > > Am 02.09.2012 19:59 schrieb "Kevin O'Connor" :
> > > > On Sat, Sep 01, 2012 at 05:12:52PM +0200, Christian Gmeiner wrote:
> > > > > There is no reason to access the DC registers via VGA
> > > > > memory mapping if we could the access via memory.
> > > >
> > > > The patch series looks okay to me.  Are these patches specific to the
> > > > board you have, or will they work with all the boards currently
> > > > supported by the SeaVGABIOS Geode code?
> > >
> > > The patches are for all supported Geode devices. I try to get access to
> > > GX
> > > hardware so that I could test the patches in real hardware. I am working
> > > on
> > > a lx800 hardware. I am waiting for the edid patches get merged to come
> > > up
> > > with more patches :)
> >
> > Are the "edid patches" you refer to the ones from Hiroshi Miura, or
> > something else?
>
> The one from Hiroshi Miura. As I also want to do some EDID stuff for the
> geode. I will have a closer look at his patches tomorrow in office.

I got some more patches waiting here. I hope you can submit this patch
series soon :)
In the meanwhile I build an adapter for my current development
platform to be able to connect
a normal VGA monitor. Quite nice to have a mirrored dual screen setup.

As I got VGA working I will also look into getting EDID via VGA etc.

---
Christian Gmeiner, MSc