Each hotplug-able memory slot is a DimmDevice. All DimmDevices are attached to a new bus called DimmBus. This bus is introduced so that we no longer depend on hotplug-capability of main system bus (the main bus does not allow hotplugging). The DimmBus should be attached to a chipset Device (i440fx in case of the pc)
A hot-add operation for a particular dimm: - creates a new DimmDevice and attaches it to the DimmBus - creates a new MemoryRegion of the given physical address offset, size and node proximity, and attaches it to main system memory as a sub_region.
Hotplug operations are done through normal device_add commands. Also add properties to DimmDevice.
v3->v4: Removed hot-remove functions. Will be offered in separate patches.
Signed-off-by: Vasilis Liaskovitis vasilis.liaskovitis@profitbricks.com --- hw/Makefile.objs | 2 +- hw/dimm.c | 245 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/dimm.h | 89 ++++++++++++++++++++ 3 files changed, 335 insertions(+), 1 deletions(-) create mode 100644 hw/dimm.c create mode 100644 hw/dimm.h
diff --git a/hw/Makefile.objs b/hw/Makefile.objs index d581d8d..51494c9 100644 --- a/hw/Makefile.objs +++ b/hw/Makefile.objs @@ -29,7 +29,7 @@ common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o common-obj-$(CONFIG_PCSPK) += pcspk.o common-obj-$(CONFIG_PCKBD) += pckbd.o common-obj-$(CONFIG_FDC) += fdc.o -common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o +common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o dimm.o common-obj-$(CONFIG_APM) += pm_smbus.o apm.o common-obj-$(CONFIG_DMA) += dma.o common-obj-$(CONFIG_I82374) += i82374.o diff --git a/hw/dimm.c b/hw/dimm.c new file mode 100644 index 0000000..e384952 --- /dev/null +++ b/hw/dimm.c @@ -0,0 +1,245 @@ +/* + * Dimm device for Memory Hotplug + * + * Copyright ProfitBricks GmbH 2012 + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see http://www.gnu.org/licenses/ + */ + +#include "trace.h" +#include "qdev.h" +#include "dimm.h" +#include <time.h> +#include "../exec-memory.h" +#include "qmp-commands.h" + +/* the following list is used to hold dimm config info before machine + * is initialized. After machine init, the list is not used anymore.*/ +static DimmConfiglist dimmconfig_list = + QTAILQ_HEAD_INITIALIZER(dimmconfig_list); + +/* the list of memory buses */ +static QLIST_HEAD(, DimmBus) memory_buses; + +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent); +static char *dimmbus_get_fw_dev_path(DeviceState *dev); + +static Property dimm_properties[] = { + DEFINE_PROP_UINT64("start", DimmDevice, start, 0), + DEFINE_PROP_SIZE("size", DimmDevice, size, DEFAULT_DIMMSIZE), + DEFINE_PROP_UINT32("node", DimmDevice, node, 0), + DEFINE_PROP_BIT("populated", DimmDevice, populated, 0, false), + DEFINE_PROP_END_OF_LIST(), +}; + +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent) +{ +} + +static char *dimmbus_get_fw_dev_path(DeviceState *dev) +{ + char path[40]; + + snprintf(path, sizeof(path), "%s", qdev_fw_name(dev)); + return strdup(path); +} + +static void dimm_bus_class_init(ObjectClass *klass, void *data) +{ + BusClass *k = BUS_CLASS(klass); + + k->print_dev = dimmbus_dev_print; + k->get_fw_dev_path = dimmbus_get_fw_dev_path; +} + +static void dimm_bus_initfn(Object *obj) +{ + DimmBus *bus = DIMM_BUS(obj); + QTAILQ_INIT(&bus->dimmconfig_list); + QTAILQ_INIT(&bus->dimmlist); +} + +static const TypeInfo dimm_bus_info = { + .name = TYPE_DIMM_BUS, + .parent = TYPE_BUS, + .instance_size = sizeof(DimmBus), + .instance_init = dimm_bus_initfn, + .class_init = dimm_bus_class_init, +}; + +DimmBus *dimm_bus_create(Object *parent, const char *name, uint32_t max_dimms, + dimm_calcoffset_fn pmc_set_offset) +{ + DimmBus *memory_bus; + DimmConfig *dimm_cfg, *next_cfg; + uint32_t num_dimms = 0; + + memory_bus = g_malloc0(dimm_bus_info.instance_size); + memory_bus->qbus.name = name ? g_strdup(name) : "membus.0"; + qbus_create_inplace(&memory_bus->qbus, TYPE_DIMM_BUS, DEVICE(parent), + name); + + QTAILQ_FOREACH_SAFE(dimm_cfg, &dimmconfig_list, nextdimmcfg, next_cfg) { + if (!strcmp(memory_bus->qbus.name, dimm_cfg->bus_name)) { + if (max_dimms && (num_dimms == max_dimms)) { + fprintf(stderr, "Bus %s can only accept %u number of DIMMs\n", + name, max_dimms); + } + QTAILQ_REMOVE(&dimmconfig_list, dimm_cfg, nextdimmcfg); + QTAILQ_INSERT_TAIL(&memory_bus->dimmconfig_list, dimm_cfg, + nextdimmcfg); + + dimm_cfg->start = pmc_set_offset(DEVICE(parent), dimm_cfg->size); + num_dimms++; + } + } + QLIST_INSERT_HEAD(&memory_buses, memory_bus, next); + return memory_bus; +} + +static void dimm_populate(DimmDevice *s) +{ + DeviceState *dev = (DeviceState *)s; + MemoryRegion *new = NULL; + + new = g_malloc(sizeof(MemoryRegion)); + memory_region_init_ram(new, dev->id, s->size); + vmstate_register_ram_global(new); + memory_region_add_subregion(get_system_memory(), s->start, new); + s->populated = true; + s->mr = new; +} + +void dimm_config_create(char *id, uint64_t size, const char *bus, uint64_t node, + uint32_t dimm_idx, uint32_t populated) +{ + DimmConfig *dimm_cfg; + dimm_cfg = (DimmConfig *) g_malloc0(sizeof(DimmConfig)); + dimm_cfg->name = strdup(id); + dimm_cfg->bus_name = strdup(bus); + dimm_cfg->idx = dimm_idx; + dimm_cfg->start = 0; + dimm_cfg->size = size; + dimm_cfg->node = node; + dimm_cfg->populated = populated; + + QTAILQ_INSERT_TAIL(&dimmconfig_list, dimm_cfg, nextdimmcfg); +} + +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev) +{ + DimmBus *bus; + QLIST_FOREACH(bus, &memory_buses, next) { + assert(bus); + bus->qbus.allow_hotplug = 1; + bus->dimm_hotplug_qdev = qdev; + bus->dimm_hotplug = hotplug; + } +} + +static void dimm_plug_device(DimmDevice *slot) +{ + DimmBus *bus = DIMM_BUS(qdev_get_parent_bus(&slot->qdev)); + + dimm_populate(slot); + if (bus->dimm_hotplug) { + bus->dimm_hotplug(bus->dimm_hotplug_qdev, slot, 1); + } +} + +static int dimm_unplug_device(DeviceState *qdev) +{ + return 1; +} + +static DimmConfig *dimmcfg_find_from_name(DimmBus *bus, const char *name) +{ + DimmConfig *slot; + + QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) { + if (!strcmp(slot->name, name)) { + return slot; + } + } + return NULL; +} + +void dimm_setup_fwcfg_layout(uint64_t *fw_cfg_slots) +{ + DimmConfig *slot; + DimmBus *bus; + + QLIST_FOREACH(bus, &memory_buses, next) { + QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) { + assert(slot->start); + fw_cfg_slots[3 * slot->idx] = cpu_to_le64(slot->start); + fw_cfg_slots[3 * slot->idx + 1] = cpu_to_le64(slot->size); + fw_cfg_slots[3 * slot->idx + 2] = cpu_to_le64(slot->node); + } + } +} + +static int dimm_init(DeviceState *s) +{ + DimmBus *bus = DIMM_BUS(qdev_get_parent_bus(s)); + DimmDevice *slot; + DimmConfig *slotcfg; + + slot = DIMM(s); + slot->mr = NULL; + + slotcfg = dimmcfg_find_from_name(bus, s->id); + + if (!slotcfg) { + fprintf(stderr, "%s no config for slot %s found\n", + __func__, s->id); + return 1; + } + + slot->idx = slotcfg->idx; + assert(slotcfg->start); + slot->start = slotcfg->start; + slot->size = slotcfg->size; + slot->node = slotcfg->node; + + QTAILQ_INSERT_TAIL(&bus->dimmlist, slot, nextdimm); + dimm_plug_device(slot); + + return 0; +} + + +static void dimm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->props = dimm_properties; + dc->unplug = dimm_unplug_device; + dc->init = dimm_init; + dc->bus_type = TYPE_DIMM_BUS; +} + +static TypeInfo dimm_info = { + .name = TYPE_DIMM, + .parent = TYPE_DEVICE, + .instance_size = sizeof(DimmDevice), + .class_init = dimm_class_init, +}; + +static void dimm_register_types(void) +{ + type_register_static(&dimm_bus_info); + type_register_static(&dimm_info); +} + +type_init(dimm_register_types) diff --git a/hw/dimm.h b/hw/dimm.h new file mode 100644 index 0000000..75a6911 --- /dev/null +++ b/hw/dimm.h @@ -0,0 +1,89 @@ +#ifndef QEMU_DIMM_H +#define QEMU_DIMM_H + +#include "qemu-common.h" +#include "memory.h" +#include "sysbus.h" +#include "qapi-types.h" +#include "qemu-queue.h" +#include "cpus.h" +#define MAX_DIMMS 255 +#define DIMM_BITMAP_BYTES ((MAX_DIMMS + 7) / 8) +#define DEFAULT_DIMMSIZE (1024*1024*1024) + +typedef enum { + DIMM_REMOVE_SUCCESS = 0, + DIMM_REMOVE_FAIL = 1, + DIMM_ADD_SUCCESS = 2, + DIMM_ADD_FAIL = 3 +} dimm_hp_result_code; + +#define TYPE_DIMM "dimm" +#define DIMM(obj) \ + OBJECT_CHECK(DimmDevice, (obj), TYPE_DIMM) +#define DIMM_CLASS(klass) \ + OBJECT_CLASS_CHECK(DimmDeviceClass, (klass), TYPE_DIMM) +#define DIMM_GET_CLASS(obj) \ + OBJECT_GET_CLASS(DimmDeviceClass, (obj), TYPE_DIMM) + +typedef struct DimmDevice DimmDevice; +typedef QTAILQ_HEAD(DimmConfiglist, DimmConfig) DimmConfiglist; + +typedef struct DimmDeviceClass { + DeviceClass parent_class; + + int (*init)(DimmDevice *dev); +} DimmDeviceClass; + +struct DimmDevice { + DeviceState qdev; + uint32_t idx; /* index in memory hotplug register/bitmap */ + ram_addr_t start; /* starting physical address */ + ram_addr_t size; + uint32_t node; /* numa node proximity */ + uint32_t populated; /* 1 means device has been hotplugged. Default is 0. */ + MemoryRegion *mr; /* MemoryRegion for this slot. !NULL only if populated */ + QTAILQ_ENTRY(DimmDevice) nextdimm; +}; + +typedef struct DimmConfig { + const char *name; + uint32_t idx; /* index in linear memory hotplug bitmap */ + const char *bus_name; + ram_addr_t start; /* starting physical address */ + ram_addr_t size; + uint32_t node; /* numa node proximity */ + uint32_t populated; /* 1 means device has been hotplugged. Default is 0. */ + QTAILQ_ENTRY(DimmConfig) nextdimmcfg; +} DimmConfig; + +typedef int (*dimm_hotplug_fn)(DeviceState *qdev, DimmDevice *dev, int add); +typedef hwaddr(*dimm_calcoffset_fn)(DeviceState *dev, uint64_t size); + +#define TYPE_DIMM_BUS "dimmbus" +#define DIMM_BUS(obj) OBJECT_CHECK(DimmBus, (obj), TYPE_DIMM_BUS) + +typedef struct DimmBus { + BusState qbus; + DeviceState *dimm_hotplug_qdev; + dimm_hotplug_fn dimm_hotplug; + DimmConfiglist dimmconfig_list; + QTAILQ_HEAD(Dimmlist, DimmDevice) dimmlist; + QLIST_ENTRY(DimmBus) next; +} DimmBus; + +struct dimm_hp_result { + const char *dimmname; + dimm_hp_result_code ret; + QTAILQ_ENTRY(dimm_hp_result) next; +}; + +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev); +void dimm_setup_fwcfg_layout(uint64_t *fw_cfg_slots); +int dimm_add(char *id); +DimmBus *dimm_bus_create(Object *parent, const char *name, uint32_t max_dimms, + dimm_calcoffset_fn pmc_set_offset); +void dimm_config_create(char *id, uint64_t size, const char *bus, uint64_t node, + uint32_t dimm_idx, uint32_t populated); + +#endif
-
Vasilis Liaskovitis