[PATCH 0/3][RFC] POST changes to help with CSM

List overview All Threads
Download

newer

older

[PATCH 0/3][RFC] More post init...

Re: [SeaBIOS] [PATCH RFC] Quite...

Kevin O'Connor

21 Jan 2013 21 Jan '13

7:04 a.m.

This patch series reorganizes the POST initialization sequence to make it more reusable should SeaBIOS be hooked up as a UEFI Compatibility Support Module (CSM). This is a work in progress.

-Kevin

Kevin O'Connor (3): post: Avoid calling maininit() from init reloc_init(). Normalize POST initialization function name suffixes. POST: Reorganize post init functions for better grouping and reusability.

-- 1.7.11.7

Show replies by date

Kevin O'Connor

21 Jan 21 Jan

7:05 a.m.

New subject: [PATCH 1/3] post: Avoid calling maininit() from init reloc_init().

Call maininit() and startBoot() from handle_post(). This reduces the chaining of calls during the relocation phase, and allows maininit() to return (which may be useful when using SeaBIOS as a CSM).

This change relies on reloc_init() modifying the maininit() call in handle_post() when relocations are enabled. It technically may not be safe to modify gcc generated code when in that gcc code, but it should be safe in practice.

Signed-off-by: Kevin O'Connor kevin@koconnor.net --- src/pmm.c | 5 +++++ src/post.c | 46 ++++++++++++++++------------------------------ 2 files changed, 21 insertions(+), 30 deletions(-)

diff --git a/src/pmm.c b/src/pmm.c index 1657c10..6ddeae1 100644 --- a/src/pmm.c +++ b/src/pmm.c @@ -265,6 +265,11 @@ malloc_fixupreloc(void) return; dprintf(3, "malloc fixup reloc\n");

+ // Move low-memory initial variable content to new location. + extern u8 datalow_start[], datalow_end[], final_datalow_start[]; + memmove(final_datalow_start, datalow_start, datalow_end - datalow_start); + + // Fixup pointers back to ZoneX globals. int i; for (i=0; i<ARRAY_SIZE(Zones); i++) { struct zone_s *zone = Zones[i]; diff --git a/src/post.c b/src/post.c index f3b56b8..6a91f81 100644 --- a/src/post.c +++ b/src/post.c @@ -200,7 +200,7 @@ init_hw(void) }

// Begin the boot process by invoking an int0x19 in 16bit mode. -void VISIBLE32FLAT +static void startBoot(void) { // Clear low-memory allocations (required by PMM spec). @@ -214,9 +214,12 @@ startBoot(void) }

// Main setup code. -static void +void VISIBLE32INIT maininit(void) { + // Running at new code address - do code relocation fixups + malloc_fixupreloc(); + // Setup romfile items. qemu_cfg_romfile_setup(); coreboot_cbfs_setup(); @@ -287,9 +290,6 @@ maininit(void)

// Write protect bios memory. make_bios_readonly(); - - // Invoke int 19 to start boot process. - startBoot(); }

@@ -297,21 +297,6 @@ maininit(void) * POST entry and code relocation ****************************************************************/

-// Relocation fixup code that runs at new address after relocation complete. -static void -afterReloc(void) -{ - // Running at new code address - do code relocation fixups - malloc_fixupreloc(); - - // Move low-memory initial variable content to new location. - extern u8 datalow_start[], datalow_end[], final_datalow_start[]; - memmove(final_datalow_start, datalow_start, datalow_end - datalow_start); - - // Run main code - maininit(); -} - // Update given relocs for the code at 'dest' with a given 'delta' static void updateRelocs(void *dest, u32 *rstart, u32 *rend, u32 delta) @@ -325,10 +310,8 @@ updateRelocs(void *dest, u32 *rstart, u32 *rend, u32 delta) static void reloc_init(void) { - if (!CONFIG_RELOCATE_INIT) { - maininit(); + if (!CONFIG_RELOCATE_INIT) return; - } // Symbols populated by the build. extern u8 code32flat_start[]; extern u8 _reloc_min_align; @@ -359,15 +342,12 @@ reloc_init(void) updateRelocs(codedest, _reloc_rel_start, _reloc_rel_end, -delta); updateRelocs(code32flat_start, _reloc_init_start, _reloc_init_end, delta);

- // Call maininit() in relocated code. - void (*func)(void) = (void*)afterReloc + delta; barrier(); - func(); }

// Setup for code relocation and then call reloc_init void VISIBLE32INIT -dopost(void) +doreloc(void) { HaveRunPost = 1;

@@ -376,7 +356,7 @@ dopost(void) ram_probe(); malloc_setup();

- // Relocate initialization code and call maininit(). + // Relocate initialization code. reloc_init(); }

@@ -404,6 +384,12 @@ handle_post(void) // Allow writes to modify bios area (0xf0000) make_bios_writable();

- // Now that memory is read/writable - start post process. - dopost(); + // Do pre-relocation setup and then relocate initialization code. + doreloc(); + + // Run main code + maininit(); + + // Invoke int 19 to start boot process. + startBoot(); }

-- 1.7.11.7

Kevin O'Connor

7:06 a.m.

New subject: [PATCH 2/3] Normalize POST initialization function name suffixes.

The POST phase has to invoke many initialization functions, and these functions can have complex inter-dependencies. Try to categorize the functions into 4 classes:

preinit - functions called very early in POST where function ordering is very important and the code has limited access to other interfaces.

init - functions that initialize internal interfaces and standard external interfaces. This code is generally not dependent on particular hardware and typically does not communicate directly with any hardware devices.

setup - functions which access hardware or are dependent on particular hardware or platform devices.

prepboot - functions that finalize internal interfaces and that prepare for the boot phase.

This patch attempts to normalize the suffixes - functions that used _init(), _setup(), _finalize(), or similar that did not follow the above pattern were renamed. Other than function name changes, there should be no code impact to this patch.

diff --git a/src/acpi.c b/src/acpi.c index 6267d7b..03cda34 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -236,7 +236,7 @@ build_header(struct acpi_table_header *h, u32 sig, int len, u8 rev)

#define PIIX4_PM_INTRRUPT 9 // irq 9

-static void piix4_fadt_init(struct pci_device *pci, void *arg) +static void piix4_fadt_setup(struct pci_device *pci, void *arg) { struct fadt_descriptor_rev1 *fadt = arg;

@@ -262,7 +262,7 @@ static void piix4_fadt_init(struct pci_device *pci, void *arg) }

/* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ -void ich9_lpc_fadt_init(struct pci_device *dev, void *arg) +void ich9_lpc_fadt_setup(struct pci_device *dev, void *arg) { struct fadt_descriptor_rev1 *fadt = arg;

@@ -290,9 +290,9 @@ void ich9_lpc_fadt_init(struct pci_device *dev, void *arg) static const struct pci_device_id fadt_init_tbl[] = { /* PIIX4 Power Management device (for ACPI) */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, - piix4_fadt_init), + piix4_fadt_setup), PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC, - ich9_lpc_fadt_init), + ich9_lpc_fadt_setup), PCI_DEVICE_END };

@@ -325,7 +325,7 @@ build_fadt(struct pci_device *pci) /* FADT */ memset(fadt, 0, sizeof(*fadt)); fadt->firmware_ctrl = cpu_to_le32((u32)facs); - fadt->dsdt = 0; /* dsdt will be filled later in acpi_bios_init() + fadt->dsdt = 0; /* dsdt will be filled later in acpi_setup() by fill_dsdt() */ pci_init_device(fadt_init_tbl, pci, fadt);

@@ -796,7 +796,7 @@ struct rsdp_descriptor *RsdpAddr;

#define MAX_ACPI_TABLES 20 void -acpi_bios_init(void) +acpi_setup(void) { if (! CONFIG_ACPI) return; diff --git a/src/acpi.h b/src/acpi.h index 715d19d..8bbf25c 100644 --- a/src/acpi.h +++ b/src/acpi.h @@ -3,7 +3,7 @@

#include "types.h" // u32

-void acpi_bios_init(void); +void acpi_setup(void); u32 find_resume_vector(void);

#define RSDP_SIGNATURE 0x2052545020445352LL // "RSD PTR " diff --git a/src/ahci.c b/src/ahci.c index 4a8eafb..879a991 100644 --- a/src/ahci.c +++ b/src/ahci.c @@ -422,7 +422,7 @@ static void ahci_port_release(struct ahci_port_s *port) #define MAXMODEL 40

/* See ahci spec chapter 10.1 "Software Initialization of HBA" */ -static int ahci_port_init(struct ahci_port_s *port) +static int ahci_port_setup(struct ahci_port_s *port) { struct ahci_ctrl_s *ctrl = port->ctrl; u32 pnr = port->pnr; @@ -549,7 +549,7 @@ ahci_port_detect(void *data)

dprintf(2, "AHCI/%d: probing\n", port->pnr); ahci_port_reset(port->ctrl, port->pnr); - rc = ahci_port_init(port); + rc = ahci_port_setup(port); if (rc < 0) ahci_port_release(port); else { @@ -567,7 +567,7 @@ ahci_port_detect(void *data)

// Initialize an ata controller and detect its drives. static void -ahci_init_controller(struct pci_device *pci) +ahci_controller_setup(struct pci_device *pci) { struct ahci_ctrl_s *ctrl = malloc_fseg(sizeof(*ctrl)); struct ahci_port_s *port; @@ -579,7 +579,7 @@ ahci_init_controller(struct pci_device *pci) return; }

- if (bounce_buf_init() < 0) { + if (create_bounce_buf() < 0) { warn_noalloc(); free(ctrl); return; @@ -616,7 +616,7 @@ ahci_init_controller(struct pci_device *pci)

// Locate and init ahci controllers. static void -ahci_init(void) +ahci_scan(void) { // Scan PCI bus for ATA adapters struct pci_device *pci; @@ -625,7 +625,7 @@ ahci_init(void) continue; if (pci->prog_if != 1 /* AHCI rev 1 */) continue; - ahci_init_controller(pci); + ahci_controller_setup(pci); } }

@@ -637,5 +637,5 @@ ahci_setup(void) return;

dprintf(3, "init ahci\n"); - ahci_init(); + ahci_scan(); } diff --git a/src/ata.c b/src/ata.c index f604b37..d1d8dff 100644 --- a/src/ata.c +++ b/src/ata.c @@ -1006,7 +1006,7 @@ static const struct pci_device_id pci_ata_tbl[] = {

// Locate and init ata controllers. static void -ata_init(void) +ata_scan(void) { if (!CONFIG_COREBOOT && !PCIDevices) { // No PCI devices found - probably a QEMU "-M isapc" machine. @@ -1035,7 +1035,7 @@ ata_setup(void) dprintf(3, "init hard drives\n");

SpinupEnd = calc_future_tsc(IDE_TIMEOUT); - ata_init(); + ata_scan();

SET_BDA(disk_control_byte, 0xc0);

diff --git a/src/block.c b/src/block.c index cfe5c33..e5f3038 100644 --- a/src/block.c +++ b/src/block.c @@ -40,7 +40,7 @@ int getDriveId(u8 exttype, struct drive_s *drive_g) return -1; }

-int bounce_buf_init(void) +int create_bounce_buf(void) { if (bounce_buf_fl) return 0; diff --git a/src/blockcmd.c b/src/blockcmd.c index 81b191b..e033ba7 100644 --- a/src/blockcmd.c +++ b/src/blockcmd.c @@ -101,7 +101,7 @@ scsi_is_ready(struct disk_op_s *op)

// Validate drive, find block size / sector count, and register drive. int -scsi_init_drive(struct drive_s *drive, const char *s, int prio) +scsi_drive_setup(struct drive_s *drive, const char *s, int prio) { struct disk_op_s dop; memset(&dop, 0, sizeof(dop)); diff --git a/src/blockcmd.h b/src/blockcmd.h index b45bbb7..8bacfcf 100644 --- a/src/blockcmd.h +++ b/src/blockcmd.h @@ -113,6 +113,6 @@ int cdb_write(struct disk_op_s *op);

int scsi_is_ready(struct disk_op_s *op); struct drive_s; -int scsi_init_drive(struct drive_s *drive, const char *s, int prio); +int scsi_drive_setup(struct drive_s *drive, const char *s, int prio);

#endif // blockcmd.h diff --git a/src/boot.c b/src/boot.c index 56843e3..2cb3b86 100644 --- a/src/boot.c +++ b/src/boot.c @@ -238,7 +238,7 @@ static int DefaultHDPrio = 103; static int DefaultBEVPrio = 104;

void -boot_setup(void) +boot_init(void) { if (! CONFIG_BOOT) return; @@ -476,7 +476,7 @@ add_bev(int type, u32 vector)

// Prepare for boot - show menu and run bcvs. void -boot_prep(void) +boot_prepboot(void) { if (! CONFIG_BOOT) { wait_threads(); @@ -695,7 +695,7 @@ int BootSequence VARLOW = -1; void VISIBLE32FLAT handle_18(void) { - debug_serial_setup(); + debug_serial_preinit(); debug_enter(NULL, DEBUG_HDL_18); int seq = BootSequence + 1; BootSequence = seq; @@ -706,7 +706,7 @@ handle_18(void) void VISIBLE32FLAT handle_19(void) { - debug_serial_setup(); + debug_serial_preinit(); debug_enter(NULL, DEBUG_HDL_19); BootSequence = 0; do_boot(0); diff --git a/src/boot.h b/src/boot.h index afe9f2e..4a93d0f 100644 --- a/src/boot.h +++ b/src/boot.h @@ -3,7 +3,7 @@ #define __BOOT_H

// boot.c -void boot_setup(void); +void boot_init(void); void boot_add_bev(u16 seg, u16 bev, u16 desc, int prio); void boot_add_bcv(u16 seg, u16 ip, u16 desc, int prio); struct drive_s; @@ -11,7 +11,7 @@ void boot_add_floppy(struct drive_s *drive_g, const char *desc, int prio); void boot_add_hd(struct drive_s *drive_g, const char *desc, int prio); void boot_add_cd(struct drive_s *drive_g, const char *desc, int prio); void boot_add_cbfs(void *data, const char *desc, int prio); -void boot_prep(void); +void boot_prepboot(void); struct pci_device; int bootprio_find_pci_device(struct pci_device *pci); int bootprio_find_scsi_device(struct pci_device *pci, int target, int lun); diff --git a/src/cdrom.c b/src/cdrom.c index 42d8e08..81b97f7 100644 --- a/src/cdrom.c +++ b/src/cdrom.c @@ -107,13 +107,13 @@ process_cdemu_op(struct disk_op_s *op) }

void -cdemu_setup(void) +cdrom_prepboot(void) { if (!CONFIG_CDROM_EMU) return; if (!CDCount) return; - if (bounce_buf_init() < 0) + if (create_bounce_buf() < 0) return;

struct drive_s *drive_g = malloc_fseg(sizeof(*drive_g)); diff --git a/src/clock.c b/src/clock.c index 71b913e..3edcaf5 100644 --- a/src/clock.c +++ b/src/clock.c @@ -133,7 +133,7 @@ u16 pmtimer_ioport VAR16VISIBLE; u32 pmtimer_wraps VARLOW; u32 pmtimer_last VARLOW;

-void pmtimer_init(u16 ioport, u32 khz) +void pmtimer_setup(u16 ioport, u32 khz) { if (!CONFIG_PMTIMER) return; @@ -266,7 +266,7 @@ pit_setup(void) }

static void -init_rtc(void) +rtc_setup(void) { outb_cmos(0x26, CMOS_STATUS_A); // 32,768Khz src, 976.5625us updates u8 regB = inb_cmos(CMOS_STATUS_B); @@ -288,7 +288,7 @@ timer_setup(void) calibrate_tsc(); pit_setup();

- init_rtc(); + rtc_setup(); rtc_updating(); u32 seconds = bcd2bin(inb_cmos(CMOS_RTC_SECONDS)); u32 minutes = bcd2bin(inb_cmos(CMOS_RTC_MINUTES)); @@ -393,7 +393,7 @@ handle_1a03(struct bregs *regs) // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1 // My assumption: RegB = ((RegB & 01100000b) | 00000010b) if (rtc_updating()) { - init_rtc(); + rtc_setup(); // fall through as if an update were not in progress } outb_cmos(regs->dh, CMOS_RTC_SECONDS); @@ -447,7 +447,7 @@ handle_1a05(struct bregs *regs) // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1 // My assumption: RegB = (RegB & 01111111b) if (rtc_updating()) { - init_rtc(); + rtc_setup(); set_invalid(regs); return; } @@ -486,7 +486,7 @@ handle_1a06(struct bregs *regs) return; } if (rtc_updating()) { - init_rtc(); + rtc_setup(); // fall through as if an update were not in progress } outb_cmos(regs->dh, CMOS_RTC_SECONDS_ALARM); diff --git a/src/coreboot.c b/src/coreboot.c index e4767f1..5d013cf 100644 --- a/src/coreboot.c +++ b/src/coreboot.c @@ -123,7 +123,7 @@ const char *CBvendor = "", *CBpart = "";

// Populate max ram and e820 map info by scanning for a coreboot table. void -coreboot_setup(void) +coreboot_preinit(void) { dprintf(3, "Attempting to find coreboot table\n");

@@ -204,7 +204,7 @@ scan_tables(u32 start, u32 size) }

void -coreboot_copy_biostable(void) +coreboot_biostable_setup(void) { struct cb_memory *cbm = CBMemTable; if (! CONFIG_COREBOOT || !cbm) @@ -324,7 +324,7 @@ cbfs_copyfile(struct romfile_s *file, void *dst, u32 maxlen) }

void -coreboot_cbfs_setup(void) +coreboot_cbfs_init(void) { if (!CONFIG_COREBOOT || !CONFIG_COREBOOT_FLASH) return; diff --git a/src/disk.h b/src/disk.h index 21debec..8e49124 100644 --- a/src/disk.h +++ b/src/disk.h @@ -266,7 +266,7 @@ void map_hd_drive(struct drive_s *drive_g); void map_cd_drive(struct drive_s *drive_g); int process_op(struct disk_op_s *op); int send_disk_op(struct disk_op_s *op); -int bounce_buf_init(void); +int create_bounce_buf(void);

// floppy.c extern struct floppy_ext_dbt_s diskette_param_table2; @@ -281,7 +281,7 @@ extern u8 CDRom_locks[]; extern struct cdemu_s CDEmu; extern struct drive_s *cdemu_drive_gf; int process_cdemu_op(struct disk_op_s *op); -void cdemu_setup(void); +void cdrom_prepboot(void); void cdemu_134b(struct bregs *regs); int cdrom_boot(struct drive_s *drive_g);

diff --git a/src/esp-scsi.c b/src/esp-scsi.c index c43e55b..4d1f7d2 100644 --- a/src/esp-scsi.c +++ b/src/esp-scsi.c @@ -17,7 +17,7 @@ #include "pci_ids.h" // PCI_DEVICE_ID #include "pci_regs.h" // PCI_VENDOR_ID #include "boot.h" // bootprio_find_scsi_device -#include "blockcmd.h" // scsi_init_drive +#include "blockcmd.h" // scsi_drive_setup #include "disk.h"

#define ESP_TCLO 0x00 @@ -174,7 +174,7 @@ esp_scsi_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun) pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf), pci_bdf_to_fn(pci->bdf), target, lun); int prio = bootprio_find_scsi_device(pci, target, lun); - int ret = scsi_init_drive(&llun->drive, name, prio); + int ret = scsi_drive_setup(&llun->drive, name, prio); free(name); if (ret) goto fail; diff --git a/src/kbd.c b/src/kbd.c index e9ea594..05845e5 100644 --- a/src/kbd.c +++ b/src/kbd.c @@ -35,7 +35,7 @@ #define KF2_101KBD (1<<4)

void -kbd_setup(void) +kbd_init(void) { dprintf(3, "init keyboard\n"); u16 x = offsetof(struct bios_data_area_s, kbd_buf); diff --git a/src/lsi-scsi.c b/src/lsi-scsi.c index f8d715b..76e9d1d 100644 --- a/src/lsi-scsi.c +++ b/src/lsi-scsi.c @@ -17,7 +17,7 @@ #include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK #include "pci_regs.h" // PCI_VENDOR_ID #include "boot.h" // bootprio_find_scsi_device -#include "blockcmd.h" // scsi_init_drive +#include "blockcmd.h" // scsi_drive_setup #include "disk.h"

#define LSI_REG_DSTAT 0x0c @@ -152,7 +152,7 @@ lsi_scsi_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun) pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf), pci_bdf_to_fn(pci->bdf), target, lun); int prio = bootprio_find_scsi_device(pci, target, lun); - int ret = scsi_init_drive(&llun->drive, name, prio); + int ret = scsi_drive_setup(&llun->drive, name, prio); free(name); if (ret) goto fail; diff --git a/src/megasas.c b/src/megasas.c index 3ccdd0a..170700f 100644 --- a/src/megasas.c +++ b/src/megasas.c @@ -17,7 +17,7 @@ #include "pci_ids.h" // PCI_DEVICE_ID_XXX #include "pci_regs.h" // PCI_VENDOR_ID #include "boot.h" // bootprio_find_scsi_device -#include "blockcmd.h" // scsi_init_drive +#include "blockcmd.h" // scsi_drive_setup #include "disk.h"

#define MFI_DB 0x0 // Doorbell @@ -223,7 +223,7 @@ megasas_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun) pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf), pci_bdf_to_fn(pci->bdf), target, lun); prio = bootprio_find_scsi_device(pci, target, lun); - ret = scsi_init_drive(&mlun->drive, name, prio); + ret = scsi_drive_setup(&mlun->drive, name, prio); free(name); if (ret) { free(mlun->frame); diff --git a/src/memmap.c b/src/memmap.c index 3783518..29ca644 100644 --- a/src/memmap.c +++ b/src/memmap.c @@ -133,7 +133,7 @@ add_e820(u64 start, u64 size, u32 type)

// Report on final memory locations. void -memmap_finalize(void) +memmap_prepboot(void) { dump_map(); } diff --git a/src/memmap.h b/src/memmap.h index 01c7ddb..783a042 100644 --- a/src/memmap.h +++ b/src/memmap.h @@ -17,7 +17,7 @@ struct e820entry { };

void add_e820(u64 start, u64 size, u32 type); -void memmap_finalize(void); +void memmap_prepboot(void);

// A typical OS page size #define PAGE_SIZE 4096 diff --git a/src/misc.c b/src/misc.c index 54d8aef..bcc450a 100644 --- a/src/misc.c +++ b/src/misc.c @@ -61,7 +61,7 @@ handle_02(void) }

void -mathcp_setup(void) +mathcp_init(void) { dprintf(3, "math cp init\n"); // 80x87 coprocessor installed diff --git a/src/mouse.c b/src/mouse.c index 7b28a63..5371cf6 100644 --- a/src/mouse.c +++ b/src/mouse.c @@ -12,7 +12,7 @@ #include "usb-hid.h" // usb_mouse_command

void -mouse_setup(void) +mouse_init(void) { if (! CONFIG_MOUSE) return; diff --git a/src/mptable.c b/src/mptable.c index 3aa3427..2d4e441 100644 --- a/src/mptable.c +++ b/src/mptable.c @@ -13,7 +13,7 @@ #include "pci_regs.h"

void -mptable_init(void) +mptable_setup(void) { if (! CONFIG_MPTABLE) return; diff --git a/src/mptable.h b/src/mptable.h index c4e3c51..6252854 100644 --- a/src/mptable.h +++ b/src/mptable.h @@ -75,6 +75,6 @@ struct mpt_intsrc { } PACKED;

// mptable.c -void mptable_init(void); +void mptable_setup(void);

#endif // mptable.h diff --git a/src/optionroms.c b/src/optionroms.c index 00697b2..c79a706 100644 --- a/src/optionroms.c +++ b/src/optionroms.c @@ -40,7 +40,7 @@ __callrom(struct rom_header *rom, u16 offset, u16 bdf) farcall16big(&br); finish_preempt();

- debug_serial_setup(); + debug_serial_preinit(); }

// Execute a given option rom at the standard entry vector. @@ -410,13 +410,13 @@ optionrom_setup(void) * VGA init ****************************************************************/

-static int S3ResumeVgaInit; +static int S3ResumeVga; int ScreenAndDebug; struct rom_header *VgaROM;

// Call into vga code to turn on console. void -vga_setup(void) +vgarom_setup(void) { if (! CONFIG_OPTIONROMS) return; @@ -425,7 +425,7 @@ vga_setup(void)

// Load some config settings that impact VGA. EnforceChecksum = romfile_loadint("etc/optionroms-checksum", 1); - S3ResumeVgaInit = romfile_loadint("etc/s3-resume-vga-init", !CONFIG_COREBOOT); + S3ResumeVga = romfile_loadint("etc/s3-resume-vga-init", !CONFIG_COREBOOT); ScreenAndDebug = romfile_loadint("etc/screen-and-debug", 1);

if (CONFIG_OPTIONROMS_DEPLOYED) { @@ -459,9 +459,9 @@ vga_setup(void) }

void -s3_resume_vga_init(void) +s3_resume_vga(void) { - if (!S3ResumeVgaInit) + if (!S3ResumeVga) return; if (!VgaROM || ! is_valid_rom(VgaROM)) return; diff --git a/src/output.c b/src/output.c index 83de7f4..e623d37 100644 --- a/src/output.c +++ b/src/output.c @@ -26,7 +26,7 @@ struct putcinfo { u16 DebugOutputPort VAR16VISIBLE = 0x402;

void -debug_serial_setup(void) +debug_serial_preinit(void) { if (!CONFIG_DEBUG_SERIAL) return; diff --git a/src/paravirt.c b/src/paravirt.c index 4b5c441..f180261 100644 --- a/src/paravirt.c +++ b/src/paravirt.c @@ -11,7 +11,7 @@ #include "util.h" // dprintf #include "byteorder.h" // be32_to_cpu #include "ioport.h" // outw -#include "paravirt.h" // qemu_cfg_port_probe +#include "paravirt.h" // qemu_cfg_preinit #include "smbios.h" // struct smbios_structure_header

int qemu_cfg_present; @@ -42,7 +42,7 @@ qemu_cfg_read_entry(void *buf, int e, int len) qemu_cfg_read(buf, len); }

-void qemu_cfg_port_probe(void) +void qemu_cfg_preinit(void) { char *sig = "QEMU"; int i; @@ -321,7 +321,7 @@ struct QemuCfgFile { char name[56]; };

-void qemu_cfg_romfile_setup(void) +void qemu_romfile_init(void) { if (CONFIG_COREBOOT || !qemu_cfg_present) return; diff --git a/src/paravirt.h b/src/paravirt.h index a284c41..765a6c1 100644 --- a/src/paravirt.h +++ b/src/paravirt.h @@ -43,7 +43,7 @@ static inline int kvm_para_available(void)

extern int qemu_cfg_present;

-void qemu_cfg_port_probe(void); +void qemu_cfg_preinit(void); int qemu_cfg_show_boot_menu(void); void qemu_cfg_get_uuid(u8 *uuid); int qemu_cfg_irq0_override(void); @@ -64,6 +64,6 @@ struct e820_reservation { }; u32 qemu_cfg_e820_entries(void); void* qemu_cfg_e820_load_next(void *addr); -void qemu_cfg_romfile_setup(void); +void qemu_romfile_init(void);

#endif diff --git a/src/pci.h b/src/pci.h index fe663b8..aa54dd7 100644 --- a/src/pci.h +++ b/src/pci.h @@ -118,7 +118,7 @@ u32 pci_readl(u32 addr); void pci_writel(u32 addr, u32 val);

// pirtable.c -void create_pirtable(void); +void pirtable_setup(void);

/**************************************************************** diff --git a/src/pcibios.c b/src/pcibios.c index e4bd7c0..f084fa1 100644 --- a/src/pcibios.c +++ b/src/pcibios.c @@ -229,7 +229,7 @@ struct bios32_s BIOS32HEADER __aligned(16) VAR16EXPORT = { };

void -bios32_setup(void) +bios32_init(void) { dprintf(3, "init bios32\n");

diff --git a/src/pciinit.c b/src/pciinit.c index a406bbd..34b47b6 100644 --- a/src/pciinit.c +++ b/src/pciinit.c @@ -105,7 +105,7 @@ static int pci_slot_get_irq(struct pci_device *pci, int pin) }

/* PIIX3/PIIX4 PCI to ISA bridge */ -static void piix_isa_bridge_init(struct pci_device *pci, void *arg) +static void piix_isa_bridge_setup(struct pci_device *pci, void *arg) { int i, irq; u8 elcr[2]; @@ -126,7 +126,7 @@ static void piix_isa_bridge_init(struct pci_device *pci, void *arg)

/* ICH9 LPC PCI to ISA bridge */ /* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ -void mch_isa_bridge_init(struct pci_device *dev, void *arg) +void mch_isa_bridge_setup(struct pci_device *dev, void *arg) { u16 bdf = dev->bdf; int i, irq; @@ -160,10 +160,10 @@ void mch_isa_bridge_init(struct pci_device *dev, void *arg) /* acpi enable, SCI: IRQ9 000b = irq9*/ pci_config_writeb(bdf, ICH9_LPC_ACPI_CTRL, ICH9_LPC_ACPI_CTRL_ACPI_EN);

- pmtimer_init(PORT_ACPI_PM_BASE + 0x08, PM_TIMER_FREQUENCY / 1000); + pmtimer_setup(PORT_ACPI_PM_BASE + 0x08, PM_TIMER_FREQUENCY / 1000); }

-static void storage_ide_init(struct pci_device *pci, void *arg) +static void storage_ide_setup(struct pci_device *pci, void *arg) { /* IDE: we map it as in ISA mode */ pci_set_io_region_addr(pci, 0, PORT_ATA1_CMD_BASE, 0); @@ -173,27 +173,27 @@ static void storage_ide_init(struct pci_device *pci, void *arg) }

/* PIIX3/PIIX4 IDE */ -static void piix_ide_init(struct pci_device *pci, void *arg) +static void piix_ide_setup(struct pci_device *pci, void *arg) { u16 bdf = pci->bdf; pci_config_writew(bdf, 0x40, 0x8000); // enable IDE0 pci_config_writew(bdf, 0x42, 0x8000); // enable IDE1 }

-static void pic_ibm_init(struct pci_device *pci, void *arg) +static void pic_ibm_setup(struct pci_device *pci, void *arg) { /* PIC, IBM, MPIC & MPIC2 */ pci_set_io_region_addr(pci, 0, 0x80800000 + 0x00040000, 0); }

-static void apple_macio_init(struct pci_device *pci, void *arg) +static void apple_macio_setup(struct pci_device *pci, void *arg) { /* macio bridge */ pci_set_io_region_addr(pci, 0, 0x80800000, 0); }

/* PIIX4 Power Management device (for ACPI) */ -static void piix4_pm_init(struct pci_device *pci, void *arg) +static void piix4_pm_setup(struct pci_device *pci, void *arg) { u16 bdf = pci->bdf; // acpi sci is hardwired to 9 @@ -204,12 +204,12 @@ static void piix4_pm_init(struct pci_device *pci, void *arg) pci_config_writel(bdf, 0x90, PORT_SMB_BASE | 1); pci_config_writeb(bdf, 0xd2, 0x09); /* enable SMBus io space */

- pmtimer_init(PORT_ACPI_PM_BASE + 0x08, PM_TIMER_FREQUENCY / 1000); + pmtimer_setup(PORT_ACPI_PM_BASE + 0x08, PM_TIMER_FREQUENCY / 1000); }

/* ICH9 SMBUS */ /* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_SMBUS */ -void ich9_smbus_init(struct pci_device *dev, void *arg) +void ich9_smbus_setup(struct pci_device *dev, void *arg) { u16 bdf = dev->bdf; /* map smbus into io space */ @@ -223,35 +223,35 @@ void ich9_smbus_init(struct pci_device *dev, void *arg) static const struct pci_device_id pci_device_tbl[] = { /* PIIX3/PIIX4 PCI to ISA bridge */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, - piix_isa_bridge_init), + piix_isa_bridge_setup), PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - piix_isa_bridge_init), + piix_isa_bridge_setup), PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC, - mch_isa_bridge_init), + mch_isa_bridge_setup),

/* STORAGE IDE */ PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, - PCI_CLASS_STORAGE_IDE, piix_ide_init), + PCI_CLASS_STORAGE_IDE, piix_ide_setup), PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, - PCI_CLASS_STORAGE_IDE, piix_ide_init), + PCI_CLASS_STORAGE_IDE, piix_ide_setup), PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, - storage_ide_init), + storage_ide_setup),

/* PIC, IBM, MIPC & MPIC2 */ PCI_DEVICE_CLASS(PCI_VENDOR_ID_IBM, 0x0046, PCI_CLASS_SYSTEM_PIC, - pic_ibm_init), + pic_ibm_setup), PCI_DEVICE_CLASS(PCI_VENDOR_ID_IBM, 0xFFFF, PCI_CLASS_SYSTEM_PIC, - pic_ibm_init), + pic_ibm_setup),

/* PIIX4 Power Management device (for ACPI) */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, - piix4_pm_init), + piix4_pm_setup), PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_SMBUS, - ich9_smbus_init), + ich9_smbus_setup),

/* 0xff00 */ - PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0017, 0xff00, apple_macio_init), - PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0022, 0xff00, apple_macio_init), + PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0017, 0xff00, apple_macio_setup), + PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0022, 0xff00, apple_macio_setup),

PCI_DEVICE_END, }; @@ -288,7 +288,7 @@ static void pci_bios_init_devices(void) * Platform device initialization ****************************************************************/

-void i440fx_mem_addr_init(struct pci_device *dev, void *arg) +void i440fx_mem_addr_setup(struct pci_device *dev, void *arg) { if (RamSize <= 0x80000000) pcimem_start = 0x80000000; @@ -296,7 +296,7 @@ void i440fx_mem_addr_init(struct pci_device *dev, void *arg) pcimem_start = 0xc0000000; }

-void mch_mem_addr_init(struct pci_device *dev, void *arg) +void mch_mem_addr_setup(struct pci_device *dev, void *arg) { u64 addr = Q35_HOST_BRIDGE_PCIEXBAR_ADDR; u32 size = Q35_HOST_BRIDGE_PCIEXBAR_SIZE; @@ -316,9 +316,9 @@ void mch_mem_addr_init(struct pci_device *dev, void *arg)

static const struct pci_device_id pci_platform_tbl[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, - i440fx_mem_addr_init), + i440fx_mem_addr_setup), PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_Q35_MCH, - mch_mem_addr_init), + mch_mem_addr_setup), PCI_DEVICE_END };

diff --git a/src/pirtable.c b/src/pirtable.c index 8eadbf0..62b62b8 100644 --- a/src/pirtable.c +++ b/src/pirtable.c @@ -92,7 +92,7 @@ struct pir_table PIR_TABLE __aligned(16) VAR16EXPORT = { #endif // CONFIG_PIRTABLE && !CONFIG_COREBOOT

void -create_pirtable(void) +pirtable_setup(void) { if (! CONFIG_PIRTABLE) return; diff --git a/src/pmm.c b/src/pmm.c index 6ddeae1..cf05bd0 100644 --- a/src/pmm.c +++ b/src/pmm.c @@ -217,7 +217,7 @@ rom_confirm(u32 size) ****************************************************************/

void -malloc_setup(void) +malloc_preinit(void) { ASSERT32FLAT(); dprintf(3, "malloc setup\n"); @@ -258,7 +258,7 @@ malloc_setup(void)

// Update pointers after code relocation. void -malloc_fixupreloc(void) +malloc_fixupreloc_init(void) { ASSERT32FLAT(); if (!CONFIG_RELOCATE_INIT) @@ -286,7 +286,7 @@ malloc_fixupreloc(void) }

void -malloc_finalize(void) +malloc_prepboot(void) { ASSERT32FLAT(); dprintf(3, "malloc finalize\n"); @@ -550,7 +550,7 @@ handle_pmm(u16 *args) }

void -pmm_setup(void) +pmm_init(void) { if (! CONFIG_PMM) return; @@ -562,7 +562,7 @@ pmm_setup(void) }

void -pmm_finalize(void) +pmm_prepboot(void) { if (! CONFIG_PMM) return; diff --git a/src/pnpbios.c b/src/pnpbios.c index b1bebc9..c8bc8f4 100644 --- a/src/pnpbios.c +++ b/src/pnpbios.c @@ -90,7 +90,7 @@ extern void entry_pnp_real(void); extern void entry_pnp_prot(void);

void -pnp_setup(void) +pnp_init(void) { if (! CONFIG_PNPBIOS) return; diff --git a/src/post.c b/src/post.c index 6a91f81..6f5dfef 100644 --- a/src/post.c +++ b/src/post.c @@ -23,7 +23,7 @@ #include "usb.h" // usb_setup #include "smbios.h" // smbios_init #include "paravirt.h" // qemu_cfg_port_probe -#include "xen.h" // xen_probe_hvm_info +#include "xen.h" // xen_preinit #include "ps2port.h" // ps2port_setup #include "virtio-blk.h" // virtio_blk_setup #include "virtio-scsi.h" // virtio_scsi_setup @@ -36,7 +36,7 @@ ****************************************************************/

static void -init_ivt(void) +ivt_init(void) { dprintf(3, "init ivt\n");

@@ -76,7 +76,7 @@ init_ivt(void) }

static void -init_bda(void) +bda_init(void) { dprintf(3, "init bda\n");

@@ -101,13 +101,13 @@ init_bda(void) }

static void -ram_probe(void) +ramsize_preinit(void) { dprintf(3, "Find memory size\n"); if (CONFIG_COREBOOT) { - coreboot_setup(); + coreboot_preinit(); } else if (usingXen()) { - xen_setup(); + xen_ramsize_preinit(); } else { // On emulators, get memory size from nvram. u32 rs = ((inb_cmos(CMOS_MEM_EXTMEM2_LOW) << 16) @@ -158,29 +158,29 @@ ram_probe(void) }

static void -init_bios_tables(void) +biostable_setup(void) { if (CONFIG_COREBOOT) { - coreboot_copy_biostable(); + coreboot_biostable_setup(); return; } if (usingXen()) { - xen_copy_biostables(); + xen_biostable_setup(); return; }

- create_pirtable(); + pirtable_setup();

- mptable_init(); + mptable_setup();

- smbios_init(); + smbios_setup();

- acpi_bios_init(); + acpi_setup(); }

// Initialize hardware devices static void -init_hw(void) +device_hardware_setup(void) { usb_setup(); ps2port_setup(); @@ -218,58 +218,58 @@ void VISIBLE32INIT maininit(void) { // Running at new code address - do code relocation fixups - malloc_fixupreloc(); + malloc_fixupreloc_init();

// Setup romfile items. - qemu_cfg_romfile_setup(); - coreboot_cbfs_setup(); + qemu_romfile_init(); + coreboot_cbfs_init();

// Setup ivt/bda/ebda - init_ivt(); - init_bda(); + ivt_init(); + bda_init();

// Init base pc hardware. pic_setup(); timer_setup(); - mathcp_setup(); + mathcp_init();

// Initialize pci pci_setup(); - smm_init(); + smm_setup();

// Initialize mtrr mtrr_setup();

// Setup Xen hypercalls - xen_init_hypercalls(); + xen_hypercall_setup();

// Initialize internal tables - boot_setup(); + boot_init();

// Start hardware initialization (if optionrom threading) if (CONFIG_THREADS && CONFIG_THREAD_OPTIONROMS) - init_hw(); + device_hardware_setup();

// Find and initialize other cpus - smp_probe(); + smp_setup();

// Setup interfaces that option roms may need - bios32_setup(); - pmm_setup(); - pnp_setup(); - kbd_setup(); - mouse_setup(); - init_bios_tables(); + bios32_init(); + pmm_init(); + pnp_init(); + kbd_init(); + mouse_init(); + biostable_setup();

// Run vga option rom - vga_setup(); + vgarom_setup();

// SMBIOS tables and VGA console are ready, print UUID display_uuid();

// Do hardware initialization (if running synchronously) if (!CONFIG_THREADS || !CONFIG_THREAD_OPTIONROMS) { - init_hw(); + device_hardware_setup(); wait_threads(); }

@@ -277,13 +277,13 @@ maininit(void) optionrom_setup();

// Run BCVs and show optional boot menu - boot_prep(); + boot_prepboot();

// Finalize data structures before boot - cdemu_setup(); - pmm_finalize(); - malloc_finalize(); - memmap_finalize(); + cdrom_prepboot(); + pmm_prepboot(); + malloc_prepboot(); + memmap_prepboot();

// Setup bios checksum. BiosChecksum -= checksum((u8*)BUILD_BIOS_ADDR, BUILD_BIOS_SIZE); @@ -308,7 +308,7 @@ updateRelocs(void *dest, u32 *rstart, u32 *rend, u32 delta)

// Relocate init code and then call maininit() at new address. static void -reloc_init(void) +reloc_preinit(void) { if (!CONFIG_RELOCATE_INIT) return; @@ -352,12 +352,12 @@ doreloc(void) HaveRunPost = 1;

// Detect ram and setup internal malloc. - qemu_cfg_port_probe(); - ram_probe(); - malloc_setup(); + qemu_cfg_preinit(); + ramsize_preinit(); + malloc_preinit();

// Relocate initialization code. - reloc_init(); + reloc_preinit(); }

// Entry point for Power On Self Test (POST) - the BIOS initilization @@ -366,7 +366,7 @@ doreloc(void) void VISIBLE32FLAT handle_post(void) { - debug_serial_setup(); + debug_serial_preinit(); dprintf(1, "Start bios (version %s)\n", VERSION);

// Enable CPU caching @@ -376,10 +376,10 @@ handle_post(void) outb_cmos(0, CMOS_RESET_CODE);

// Make sure legacy DMA isn't running. - init_dma(); + dma_preinit();

// Check if we are running under Xen. - xen_probe(); + xen_preinit();

// Allow writes to modify bios area (0xf0000) make_bios_writable(); diff --git a/src/ps2port.c b/src/ps2port.c index d4626d6..9b760fd 100644 --- a/src/ps2port.c +++ b/src/ps2port.c @@ -417,7 +417,7 @@ done: ****************************************************************/

static void -keyboard_init(void *data) +ps2_keyboard_setup(void *data) { /* flush incoming keys */ int ret = i8042_flush(); @@ -500,5 +500,5 @@ ps2port_setup(void) enable_hwirq(1, FUNC16(entry_09)); enable_hwirq(12, FUNC16(entry_74));

- run_thread(keyboard_init, NULL); + run_thread(ps2_keyboard_setup, NULL); } diff --git a/src/resume.c b/src/resume.c index f1a96ac..99265cd 100644 --- a/src/resume.c +++ b/src/resume.c @@ -19,7 +19,7 @@ int HaveRunPost VAR16VISIBLE;

// Reset DMA controller void -init_dma(void) +dma_preinit(void) { // first reset the DMA controllers outb(0, PORT_DMA1_MASTER_CLEAR); @@ -35,12 +35,12 @@ void VISIBLE16 handle_resume(void) { ASSERT16(); - debug_serial_setup(); + debug_serial_preinit(); int status = inb_cmos(CMOS_RESET_CODE); outb_cmos(0, CMOS_RESET_CODE); dprintf(1, "In resume (status=%d)\n", status);

- init_dma(); + dma_preinit();

switch (status) { case 0x01 ... 0x04: @@ -109,9 +109,9 @@ s3_resume(void) }

pic_setup(); - smm_init(); + smm_setup();

- s3_resume_vga_init(); + s3_resume_vga();

make_bios_readonly();

diff --git a/src/smbios.c b/src/smbios.c index 23713a2..c235564 100644 --- a/src/smbios.c +++ b/src/smbios.c @@ -12,10 +12,10 @@ struct smbios_entry_point *SMBiosAddr;

static void -smbios_entry_point_init(u16 max_structure_size, - u16 structure_table_length, - void *structure_table_address, - u16 number_of_structures) +smbios_entry_point_setup(u16 max_structure_size, + u16 structure_table_length, + void *structure_table_address, + u16 number_of_structures) { struct smbios_entry_point *ep = malloc_fseg(sizeof(*ep)); void *finaltable; @@ -441,7 +441,7 @@ smbios_init_type_127(void *start) #define TEMPSMBIOSSIZE (32 * 1024)

void -smbios_init(void) +smbios_setup(void) { if (! CONFIG_SMBIOS) return; @@ -518,7 +518,7 @@ smbios_init(void)

#undef add_struct

- smbios_entry_point_init(max_struct_size, p - start, start, nr_structs); + smbios_entry_point_setup(max_struct_size, p - start, start, nr_structs); free(start); }

diff --git a/src/smbios.h b/src/smbios.h index 5bf0392..a4c1444 100644 --- a/src/smbios.h +++ b/src/smbios.h @@ -2,7 +2,7 @@ #define __SMBIOS_H

// smbios.c -void smbios_init(void); +void smbios_setup(void);

/* SMBIOS entry point -- must be written to a 16-bit aligned address between 0xf0000 and 0xfffff. diff --git a/src/smm.c b/src/smm.c index 7977ac7..c69f0fd 100644 --- a/src/smm.c +++ b/src/smm.c @@ -112,7 +112,7 @@ smm_relocate_and_restore(void) #define PIIX_APMC_EN (1 << 25)

// This code is hardcoded for PIIX4 Power Management device. -static void piix4_apmc_smm_init(struct pci_device *pci, void *arg) +static void piix4_apmc_smm_setup(struct pci_device *pci, void *arg) { struct pci_device *i440_pci = pci_find_device(PCI_VENDOR_ID_INTEL , PCI_DEVICE_ID_INTEL_82441); @@ -139,7 +139,7 @@ static void piix4_apmc_smm_init(struct pci_device *pci, void *arg) }

/* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ -void ich9_lpc_apmc_smm_init(struct pci_device *dev, void *arg) +void ich9_lpc_apmc_smm_setup(struct pci_device *dev, void *arg) { struct pci_device *mch_dev; int mch_bdf; @@ -174,15 +174,15 @@ void ich9_lpc_apmc_smm_init(struct pci_device *dev, void *arg)

static const struct pci_device_id smm_init_tbl[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, - piix4_apmc_smm_init), + piix4_apmc_smm_setup), PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC, - ich9_lpc_apmc_smm_init), + ich9_lpc_apmc_smm_setup),

PCI_DEVICE_END, };

void -smm_init(void) +smm_setup(void) { if (CONFIG_COREBOOT) // SMM only supported on emulators. diff --git a/src/smp.c b/src/smp.c index 4975412..18bb05f 100644 --- a/src/smp.c +++ b/src/smp.c @@ -82,7 +82,7 @@ int apic_id_is_present(u8 apic_id)

// find and initialize the CPUs by launching a SIPI to them void -smp_probe(void) +smp_setup(void) { ASSERT32FLAT(); u32 eax, ebx, ecx, cpuid_features; diff --git a/src/usb-ehci.c b/src/usb-ehci.c index 2676615..f28f343 100644 --- a/src/usb-ehci.c +++ b/src/usb-ehci.c @@ -13,8 +13,8 @@ #include "pci_regs.h" // PCI_BASE_ADDRESS_0 #include "usb.h" // struct usb_s #include "biosvar.h" // GET_LOWFLAT -#include "usb-uhci.h" // init_uhci -#include "usb-ohci.h" // init_ohci +#include "usb-uhci.h" // uhci_setup +#include "usb-ohci.h" // ohci_setup

struct usb_ehci_s { struct usb_s usb; @@ -58,13 +58,13 @@ ehci_note_port(struct usb_ehci_s *cntl) if (!pci) break;

- // ohci/uhci_init call pci_config_XXX - don't run from irq handler. + // ohci/uhci_setup call pci_config_X - don't run from irq handler. wait_preempt();

if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_UHCI) - uhci_init(pci, cntl->usb.busid + i); + uhci_setup(pci, cntl->usb.busid + i); else if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_OHCI) - ohci_init(pci, cntl->usb.busid + i); + ohci_setup(pci, cntl->usb.busid + i); } }

@@ -327,7 +327,7 @@ fail: }

int -ehci_init(struct pci_device *pci, int busid, struct pci_device *comppci) +ehci_setup(struct pci_device *pci, int busid, struct pci_device *comppci) { if (! CONFIG_USB_EHCI) return -1; diff --git a/src/usb-ehci.h b/src/usb-ehci.h index 32e4109..5672033 100644 --- a/src/usb-ehci.h +++ b/src/usb-ehci.h @@ -2,7 +2,7 @@ #define __USB_EHCI_H

// usb-ehci.c -int ehci_init(struct pci_device *pci, int busid, struct pci_device *comppci); +int ehci_setup(struct pci_device *pci, int busid, struct pci_device *comppci); struct usbdevice_s; struct usb_endpoint_descriptor; struct usb_pipe *ehci_alloc_pipe(struct usbdevice_s *usbdev diff --git a/src/usb-hid.c b/src/usb-hid.c index 8c4b803..0d5f371 100644 --- a/src/usb-hid.c +++ b/src/usb-hid.c @@ -49,8 +49,8 @@ set_idle(struct usb_pipe *pipe, int ms) #define KEYREPEATMS 33

static int -usb_kbd_init(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) +usb_kbd_setup(struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc) { if (! CONFIG_USB_KEYBOARD) return -1; @@ -79,8 +79,8 @@ usb_kbd_init(struct usbdevice_s *usbdev }

static int -usb_mouse_init(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) +usb_mouse_setup(struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc) { if (! CONFIG_USB_MOUSE) return -1; @@ -106,11 +106,11 @@ usb_mouse_init(struct usbdevice_s *usbdev

// Initialize a found USB HID device (if applicable). int -usb_hid_init(struct usbdevice_s *usbdev) +usb_hid_setup(struct usbdevice_s *usbdev) { if (! CONFIG_USB_KEYBOARD || ! CONFIG_USB_MOUSE) return -1; - dprintf(2, "usb_hid_init %p\n", usbdev->defpipe); + dprintf(2, "usb_hid_setup %p\n", usbdev->defpipe);

struct usb_interface_descriptor *iface = usbdev->iface; if (iface->bInterfaceSubClass != USB_INTERFACE_SUBCLASS_BOOT) @@ -126,9 +126,9 @@ usb_hid_init(struct usbdevice_s *usbdev) }

if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD) - return usb_kbd_init(usbdev, epdesc); + return usb_kbd_setup(usbdev, epdesc); if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) - return usb_mouse_init(usbdev, epdesc); + return usb_mouse_setup(usbdev, epdesc); return -1; }

diff --git a/src/usb-hid.h b/src/usb-hid.h index bd6445c..ef34e79 100644 --- a/src/usb-hid.h +++ b/src/usb-hid.h @@ -3,7 +3,7 @@

// usb-hid.c struct usbdevice_s; -int usb_hid_init(struct usbdevice_s *usbdev); +int usb_hid_setup(struct usbdevice_s *usbdev); inline int usb_kbd_active(void); inline int usb_kbd_command(int command, u8 *param); inline int usb_mouse_active(void); diff --git a/src/usb-hub.c b/src/usb-hub.c index 6f1aaa1..894ed7d 100644 --- a/src/usb-hub.c +++ b/src/usb-hub.c @@ -158,7 +158,7 @@ static struct usbhub_op_s HubOp = {

// Configure a usb hub and then find devices connected to it. int -usb_hub_init(struct usbdevice_s *usbdev) +usb_hub_setup(struct usbdevice_s *usbdev) { ASSERT32FLAT(); if (!CONFIG_USB_HUB) diff --git a/src/usb-hub.h b/src/usb-hub.h index a75cbda..5b09947 100644 --- a/src/usb-hub.h +++ b/src/usb-hub.h @@ -3,7 +3,7 @@

// usb-hub.c struct usbdevice_s; -int usb_hub_init(struct usbdevice_s *usbdev); +int usb_hub_setup(struct usbdevice_s *usbdev);

/**************************************************************** diff --git a/src/usb-msc.c b/src/usb-msc.c index 83c7397..7b2524d 100644 --- a/src/usb-msc.c +++ b/src/usb-msc.c @@ -6,7 +6,7 @@

#include "util.h" // dprintf #include "config.h" // CONFIG_USB_MSC -#include "usb-msc.h" // usb_msc_init +#include "usb-msc.h" // usb_msc_setup #include "usb.h" // struct usb_s #include "biosvar.h" // GET_GLOBAL #include "blockcmd.h" // cdb_read @@ -135,8 +135,8 @@ usb_msc_maxlun(struct usb_pipe *pipe) }

static int -usb_msc_init_lun(struct usb_pipe *inpipe, struct usb_pipe *outpipe, - struct usbdevice_s *usbdev, int lun) +usb_msc_lun_setup(struct usb_pipe *inpipe, struct usb_pipe *outpipe, + struct usbdevice_s *usbdev, int lun) { // Allocate drive structure. struct usbdrive_s *udrive_g = malloc_fseg(sizeof(*udrive_g)); @@ -151,7 +151,7 @@ usb_msc_init_lun(struct usb_pipe *inpipe, struct usb_pipe *outpipe, udrive_g->lun = lun;

int prio = bootprio_find_usb(usbdev, lun); - int ret = scsi_init_drive(&udrive_g->drive, "USB MSC", prio); + int ret = scsi_drive_setup(&udrive_g->drive, "USB MSC", prio); if (ret) { dprintf(1, "Unable to configure USB MSC drive.\n"); free(udrive_g); @@ -166,7 +166,7 @@ usb_msc_init_lun(struct usb_pipe *inpipe, struct usb_pipe *outpipe,

// Configure a usb msc device. int -usb_msc_init(struct usbdevice_s *usbdev) +usb_msc_setup(struct usbdevice_s *usbdev) { if (!CONFIG_USB_MSC) return -1; @@ -198,7 +198,7 @@ usb_msc_init(struct usbdevice_s *usbdev) int maxlun = usb_msc_maxlun(usbdev->defpipe); int lun, pipesused = 0; for (lun = 0; lun < maxlun + 1; lun++) { - int ret = usb_msc_init_lun(inpipe, outpipe, usbdev, lun); + int ret = usb_msc_lun_setup(inpipe, outpipe, usbdev, lun); if (!ret) pipesused = 1; } diff --git a/src/usb-msc.h b/src/usb-msc.h index 3746b77..c40d755 100644 --- a/src/usb-msc.h +++ b/src/usb-msc.h @@ -5,6 +5,6 @@ struct disk_op_s; int usb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize); struct usbdevice_s; -int usb_msc_init(struct usbdevice_s *usbdev); +int usb_msc_setup(struct usbdevice_s *usbdev);

#endif // ush-msc.h diff --git a/src/usb-ohci.c b/src/usb-ohci.c index e219c5f..ef6a52c 100644 --- a/src/usb-ohci.c +++ b/src/usb-ohci.c @@ -262,7 +262,7 @@ free: }

void -ohci_init(struct pci_device *pci, int busid) +ohci_setup(struct pci_device *pci, int busid) { if (! CONFIG_USB_OHCI) return; diff --git a/src/usb-ohci.h b/src/usb-ohci.h index 25900a7..ad0ffec 100644 --- a/src/usb-ohci.h +++ b/src/usb-ohci.h @@ -2,7 +2,7 @@ #define __USB_OHCI_H

// usb-ohci.c -void ohci_init(struct pci_device *pci, int busid); +void ohci_setup(struct pci_device *pci, int busid); struct usbdevice_s; struct usb_endpoint_descriptor; struct usb_pipe *ohci_alloc_pipe(struct usbdevice_s *usbdev diff --git a/src/usb-uas.c b/src/usb-uas.c index be153ed..3169389 100644 --- a/src/usb-uas.c +++ b/src/usb-uas.c @@ -164,10 +164,10 @@ fail: }

static int -uas_init_lun(struct usbdevice_s *usbdev, - struct usb_pipe *command, struct usb_pipe *status, - struct usb_pipe *data_in, struct usb_pipe *data_out, - int lun) +uas_lun_setup(struct usbdevice_s *usbdev, + struct usb_pipe *command, struct usb_pipe *status, + struct usb_pipe *data_in, struct usb_pipe *data_out, + int lun) { // Allocate drive structure. struct uasdrive_s *drive = malloc_fseg(sizeof(*drive)); @@ -184,7 +184,7 @@ uas_init_lun(struct usbdevice_s *usbdev, drive->lun = lun;

int prio = bootprio_find_usb(usbdev, lun); - int ret = scsi_init_drive(&drive->drive, "USB UAS", prio); + int ret = scsi_drive_setup(&drive->drive, "USB UAS", prio); if (ret) { free(drive); return -1; @@ -193,7 +193,7 @@ uas_init_lun(struct usbdevice_s *usbdev, }

int -usb_uas_init(struct usbdevice_s *usbdev) +usb_uas_setup(struct usbdevice_s *usbdev) { if (!CONFIG_USB_UAS) return -1; @@ -247,7 +247,7 @@ usb_uas_init(struct usbdevice_s *usbdev) goto fail;

/* TODO: send REPORT LUNS. For now, only LUN 0 is recognized. */ - int ret = uas_init_lun(usbdev, command, status, data_in, data_out, 0); + int ret = uas_lun_setup(usbdev, command, status, data_in, data_out, 0); if (ret < 0) { dprintf(1, "Unable to configure UAS drive.\n"); goto fail; diff --git a/src/usb-uas.h b/src/usb-uas.h index ed1d473..ad91c5f 100644 --- a/src/usb-uas.h +++ b/src/usb-uas.h @@ -4,6 +4,6 @@ struct disk_op_s; int uas_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize); struct usbdevice_s; -int usb_uas_init(struct usbdevice_s *usbdev); +int usb_uas_setup(struct usbdevice_s *usbdev);

#endif /* __USB_UAS_H */ diff --git a/src/usb-uhci.c b/src/usb-uhci.c index 17145e5..4098bf2 100644 --- a/src/usb-uhci.c +++ b/src/usb-uhci.c @@ -235,7 +235,7 @@ fail: }

void -uhci_init(struct pci_device *pci, int busid) +uhci_setup(struct pci_device *pci, int busid) { if (! CONFIG_USB_UHCI) return; diff --git a/src/usb-uhci.h b/src/usb-uhci.h index 9e3297c..b83c487 100644 --- a/src/usb-uhci.h +++ b/src/usb-uhci.h @@ -2,7 +2,7 @@ #define __USB_UHCI_H

// usb-uhci.c -void uhci_init(struct pci_device *pci, int busid); +void uhci_setup(struct pci_device *pci, int busid); struct usbdevice_s; struct usb_endpoint_descriptor; struct usb_pipe *uhci_alloc_pipe(struct usbdevice_s *usbdev diff --git a/src/usb.c b/src/usb.c index 421d0b8..6e43f13 100644 --- a/src/usb.c +++ b/src/usb.c @@ -9,13 +9,13 @@ #include "config.h" // CONFIG_* #include "pci_regs.h" // PCI_CLASS_REVISION #include "pci_ids.h" // PCI_CLASS_SERIAL_USB_UHCI -#include "usb-uhci.h" // uhci_init -#include "usb-ohci.h" // ohci_init -#include "usb-ehci.h" // ehci_init +#include "usb-uhci.h" // uhci_setup +#include "usb-ohci.h" // ohci_setup +#include "usb-ehci.h" // ehci_setup #include "usb-hid.h" // usb_keyboard_setup -#include "usb-hub.h" // usb_hub_init -#include "usb-msc.h" // usb_msc_init -#include "usb-uas.h" // usb_uas_init +#include "usb-hub.h" // usb_hub_setup +#include "usb-msc.h" // usb_msc_setup +#include "usb-uas.h" // usb_uas_setup #include "usb.h" // struct usb_s #include "biosvar.h" // GET_GLOBAL

@@ -323,14 +323,14 @@ configure_usb_device(struct usbdevice_s *usbdev) usbdev->iface = iface; usbdev->imax = (void*)config + config->wTotalLength - (void*)iface; if (iface->bInterfaceClass == USB_CLASS_HUB) - ret = usb_hub_init(usbdev); + ret = usb_hub_setup(usbdev); else if (iface->bInterfaceClass == USB_CLASS_MASS_STORAGE) { if (iface->bInterfaceProtocol == US_PR_BULK) - ret = usb_msc_init(usbdev); + ret = usb_msc_setup(usbdev); if (iface->bInterfaceProtocol == US_PR_UAS) - ret = usb_uas_init(usbdev); + ret = usb_uas_setup(usbdev); } else - ret = usb_hid_init(usbdev); + ret = usb_hid_setup(usbdev); if (ret) goto fail;

@@ -342,7 +342,7 @@ fail: }

static void -usb_init_hub_port(void *data) +usb_hub_port_setup(void *data) { struct usbdevice_s *usbdev = data; struct usbhub_s *hub = usbdev->hub; @@ -403,7 +403,7 @@ usb_enumerate(struct usbhub_s *hub) memset(usbdev, 0, sizeof(*usbdev)); usbdev->hub = hub; usbdev->port = i; - run_thread(usb_init_hub_port, usbdev); + run_thread(usb_hub_port_setup, usbdev); }

// Wait for threads to complete. @@ -435,7 +435,7 @@ usb_setup(void) for (;;) { if (pci_classprog(ehcipci) == PCI_CLASS_SERIAL_USB_EHCI) { // Found an ehci controller. - int ret = ehci_init(ehcipci, count++, pci); + int ret = ehci_setup(ehcipci, count++, pci); if (ret) // Error break; @@ -454,8 +454,8 @@ usb_setup(void) }

if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_UHCI) - uhci_init(pci, count++); + uhci_setup(pci, count++); else if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_OHCI) - ohci_init(pci, count++); + ohci_setup(pci, count++); } } diff --git a/src/util.h b/src/util.h index 7723bb1..eb35d02 100644 --- a/src/util.h +++ b/src/util.h @@ -202,7 +202,7 @@ void check_preempt(void);

// output.c extern u16 DebugOutputPort; -void debug_serial_setup(void); +void debug_serial_preinit(void); void panic(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))) __noreturn; void printf(const char *fmt, ...) @@ -262,19 +262,14 @@ void hexdump(const void *d, int len); __set_code_unimplemented((regs), (code) | (__LINE__ << 8), __func__)

// kbd.c -void kbd_setup(void); +void kbd_init(void); void handle_15c2(struct bregs *regs); void process_key(u8 key);

// mouse.c -void mouse_setup(void); +void mouse_init(void); void process_mouse(u8 data);

-// system.c -extern u32 RamSize; -extern u64 RamSizeOver4G; -void mathcp_setup(void); - // serial.c void serial_setup(void); void lpt_setup(void); @@ -282,7 +277,7 @@ void lpt_setup(void); // clock.c #define PIT_TICK_RATE 1193180 // Underlying HZ of PIT #define PIT_TICK_INTERVAL 65536 // Default interval for 18.2Hz timer -void pmtimer_init(u16 ioport, u32 khz); +void pmtimer_setup(u16 ioport, u32 khz); int check_tsc(u64 end); void timer_setup(void); void ndelay(u32 count); @@ -307,7 +302,7 @@ void handle_1553(struct bregs *regs);

// pcibios.c void handle_1ab1(struct bregs *regs); -void bios32_setup(void); +void bios32_init(void);

// shadow.c void make_bios_writable(void); @@ -319,23 +314,23 @@ extern const u8 pci_irqs[4]; void pci_setup(void);

// smm.c -void smm_init(void); +void smm_setup(void);

// smp.c extern u32 CountCPUs; extern u32 MaxCountCPUs; void wrmsr_smp(u32 index, u64 val); -void smp_probe(void); +void smp_setup(void); int apic_id_is_present(u8 apic_id);

// coreboot.c extern const char *CBvendor, *CBpart; struct cbfs_file; void cbfs_run_payload(struct cbfs_file *file); -void coreboot_copy_biostable(void); +void coreboot_biostable_setup(void); void cbfs_payload_setup(void); -void coreboot_setup(void); -void coreboot_cbfs_setup(void); +void coreboot_preinit(void); +void coreboot_cbfs_init(void);

// biostable.c void copy_table(void *pos); @@ -348,8 +343,8 @@ void vgahook_setup(struct pci_device *pci); // optionroms.c void call_bcv(u16 seg, u16 ip); void optionrom_setup(void); -void vga_setup(void); -void s3_resume_vga_init(void); +void vgarom_setup(void); +void s3_resume_vga(void); extern int ScreenAndDebug;

// bootsplash.c @@ -359,12 +354,12 @@ void disable_bootsplash(void);

// resume.c extern int HaveRunPost; -void init_dma(void); +void dma_preinit(void);

// pnpbios.c #define PNP_SIGNATURE 0x506e5024 // $PnP u16 get_pnp_offset(void); -void pnp_setup(void); +void pnp_init(void);

// pmm.c extern struct zone_s ZoneLow, ZoneHigh, ZoneFSeg, ZoneTmpLow, ZoneTmpHigh; @@ -372,13 +367,13 @@ u32 rom_get_top(void); u32 rom_get_last(void); struct rom_header *rom_reserve(u32 size); int rom_confirm(u32 size); -void malloc_setup(void); -void malloc_fixupreloc(void); -void malloc_finalize(void); +void malloc_preinit(void); +void malloc_fixupreloc_init(void); +void malloc_prepboot(void); void *pmm_malloc(struct zone_s *zone, u32 handle, u32 size, u32 align); int pmm_free(void *data); -void pmm_setup(void); -void pmm_finalize(void); +void pmm_init(void); +void pmm_prepboot(void); #define PMM_DEFAULT_HANDLE 0xFFFFFFFF // Minimum alignment of malloc'd memory #define MALLOC_MIN_ALIGN 16 @@ -451,6 +446,9 @@ u64 romfile_loadint(const char *name, u64 defval); void reset_vector(void) __noreturn;

// misc.c +void mathcp_init(void); +extern u32 RamSize; +extern u64 RamSizeOver4G; extern u8 BiosChecksum;

// version (auto generated file out/version.c) diff --git a/src/virtio-scsi.c b/src/virtio-scsi.c index ab74729..4bbff8f 100644 --- a/src/virtio-scsi.c +++ b/src/virtio-scsi.c @@ -14,7 +14,7 @@ #include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK #include "pci_regs.h" // PCI_VENDOR_ID #include "boot.h" // bootprio_find_scsi_device -#include "blockcmd.h" // scsi_init_drive +#include "blockcmd.h" // scsi_drive_setup #include "virtio-pci.h" #include "virtio-ring.h" #include "virtio-scsi.h" @@ -114,7 +114,7 @@ virtio_scsi_add_lun(struct pci_device *pci, u16 ioaddr, vlun->lun = lun;

int prio = bootprio_find_scsi_device(pci, target, lun); - int ret = scsi_init_drive(&vlun->drive, "virtio-scsi", prio); + int ret = scsi_drive_setup(&vlun->drive, "virtio-scsi", prio); if (ret) goto fail; return 0; diff --git a/src/xen.c b/src/xen.c index a4669d0..c9759f0 100644 --- a/src/xen.c +++ b/src/xen.c @@ -47,7 +47,7 @@ static void validate_info(struct xen_seabios_info *t) panic("Bad Xen info checksum\n"); }

-void xen_probe(void) +void xen_preinit(void) { u32 base, eax, ebx, ecx, edx; char signature[13]; @@ -86,7 +86,7 @@ static int hypercall_xen_version( int cmd, void *arg) }

/* Fill in hypercall transfer pages. */ -void xen_init_hypercalls(void) +void xen_hypercall_setup(void) { u32 eax, ebx, ecx, edx; xen_extraversion_t extraversion; @@ -111,7 +111,7 @@ void xen_init_hypercalls(void) dprintf(1, "Detected Xen v%u.%u%s\n", eax >> 16, eax & 0xffff, extraversion); }

-void xen_copy_biostables(void) +void xen_biostable_setup(void) { struct xen_seabios_info *info = (void *)INFO_PHYSICAL_ADDRESS; void **tables = (void*)info->tables; @@ -122,7 +122,7 @@ void xen_copy_biostables(void) copy_table(tables[i]); }

-void xen_setup(void) +void xen_ramsize_preinit(void) { u64 maxram = 0, maxram_over4G = 0; int i; diff --git a/src/xen.h b/src/xen.h index b664d9c..9b4178a 100644 --- a/src/xen.h +++ b/src/xen.h @@ -6,10 +6,10 @@

extern u32 xen_cpuid_base;

-void xen_probe(void); -void xen_setup(void); -void xen_init_hypercalls(void); -void xen_copy_biostables(void); +void xen_preinit(void); +void xen_ramsize_preinit(void); +void xen_hypercall_setup(void); +void xen_biostable_setup(void);

static inline int usingXen(void) { if (!CONFIG_XEN) diff --git a/vgasrc/bochsvga.c b/vgasrc/bochsvga.c index 938dba0..bb5a64d 100644 --- a/vgasrc/bochsvga.c +++ b/vgasrc/bochsvga.c @@ -329,9 +329,9 @@ bochsvga_set_mode(struct vgamode_s *vmode_g, int flags) ****************************************************************/

int -bochsvga_init(void) +bochsvga_setup(void) { - int ret = stdvga_init(); + int ret = stdvga_setup(); if (ret) return ret;

diff --git a/vgasrc/bochsvga.h b/vgasrc/bochsvga.h index 1c98203..87fb6ea 100644 --- a/vgasrc/bochsvga.h +++ b/vgasrc/bochsvga.h @@ -66,6 +66,6 @@ int bochsvga_size_state(int states); int bochsvga_save_state(u16 seg, void *data, int states); int bochsvga_restore_state(u16 seg, void *data, int states); int bochsvga_set_mode(struct vgamode_s *vmode_g, int flags); -int bochsvga_init(void); +int bochsvga_setup(void);

#endif // bochsvga.h diff --git a/vgasrc/clext.c b/vgasrc/clext.c index fc5459a..dd45df3 100644 --- a/vgasrc/clext.c +++ b/vgasrc/clext.c @@ -5,7 +5,7 @@ // // This file may be distributed under the terms of the GNU LGPLv3 license.

-#include "clext.h" // clext_init +#include "clext.h" // clext_setup #include "vgabios.h" // VBE_VENDOR_STRING #include "biosvar.h" // GET_GLOBAL #include "util.h" // dprintf @@ -603,9 +603,9 @@ cirrus_get_memsize(void) }

int -clext_init(void) +clext_setup(void) { - int ret = stdvga_init(); + int ret = stdvga_setup(); if (ret) return ret;

diff --git a/vgasrc/clext.h b/vgasrc/clext.h index 78dba01..efc98b9 100644 --- a/vgasrc/clext.h +++ b/vgasrc/clext.h @@ -17,6 +17,6 @@ int clext_restore_state(u16 seg, void *data, int states); int clext_set_mode(struct vgamode_s *vmode_g, int flags); struct bregs; void clext_1012(struct bregs *regs); -int clext_init(void); +int clext_setup(void);

#endif // clext.h diff --git a/vgasrc/geodevga.c b/vgasrc/geodevga.c index 5b42e00..c2dabf5 100644 --- a/vgasrc/geodevga.c +++ b/vgasrc/geodevga.c @@ -6,7 +6,7 @@ // // This file may be distributed under the terms of the GNU LGPLv3 license.

-#include "geodevga.h" // geodevga_init +#include "geodevga.h" // geodevga_setup #include "farptr.h" // SET_FARVAR #include "biosvar.h" // GET_BDA #include "vgabios.h" // VGAREG_* @@ -369,16 +369,16 @@ static u8 geode_crtc_13[] VAR16 = { 0x9b, 0x8d, 0x8f, 0x28, 0x40, 0x98, 0xb9, 0xa3, 0xff };

-int geodevga_init(void) +int geodevga_setup(void) { - int ret = stdvga_init(); + int ret = stdvga_setup(); if (ret) return ret;

- dprintf(1,"GEODEVGA_INIT\n"); + dprintf(1,"GEODEVGA_SETUP\n");

if ((ret=legacyio_check())) { - dprintf(1,"GEODEVGA_INIT legacyio_check=0x%x\n",ret); + dprintf(1,"GEODEVGA_SETUP legacyio_check=0x%x\n",ret); }

// Updated timings from geode datasheets, table 6-53 in particular diff --git a/vgasrc/geodevga.h b/vgasrc/geodevga.h index 5993b23..180bd05 100644 --- a/vgasrc/geodevga.h +++ b/vgasrc/geodevga.h @@ -84,6 +84,6 @@ /* Mask */ #define DC_CFG_MSK 0xf000a6

-int geodevga_init(); +int geodevga_setup();

#endif diff --git a/vgasrc/stdvga.c b/vgasrc/stdvga.c index ae6c0be..a29d6d4 100644 --- a/vgasrc/stdvga.c +++ b/vgasrc/stdvga.c @@ -6,7 +6,7 @@ // This file may be distributed under the terms of the GNU LGPLv3 license.

#include "vgabios.h" // struct vgamode_s -#include "stdvga.h" // stdvga_init +#include "stdvga.h" // stdvga_setup #include "ioport.h" // outb #include "farptr.h" // SET_FARVAR #include "biosvar.h" // GET_GLOBAL @@ -490,7 +490,7 @@ stdvga_enable_video_addressing(u8 disable) }

int -stdvga_init(void) +stdvga_setup(void) { // switch to color mode and enable CPU access 480 lines stdvga_misc_write(0xc3); diff --git a/vgasrc/stdvga.h b/vgasrc/stdvga.h index c9a9ba1..d712a32 100644 --- a/vgasrc/stdvga.h +++ b/vgasrc/stdvga.h @@ -107,6 +107,6 @@ int stdvga_size_state(int states); int stdvga_save_state(u16 seg, void *data, int states); int stdvga_restore_state(u16 seg, void *data, int states); void stdvga_enable_video_addressing(u8 disable); -int stdvga_init(void); +int stdvga_setup(void);

#endif // stdvga.h diff --git a/vgasrc/vgabios.c b/vgasrc/vgabios.c index afaf018..3e26e32 100644 --- a/vgasrc/vgabios.c +++ b/vgasrc/vgabios.c @@ -1281,7 +1281,7 @@ int HaveRunInit VAR16; void VISIBLE16 vga_post(struct bregs *regs) { - debug_serial_setup(); + debug_serial_preinit(); dprintf(1, "Start SeaVGABIOS (version %s)\n", VERSION); debug_enter(regs, DEBUG_VGA_POST);

@@ -1294,7 +1294,7 @@ vga_post(struct bregs *regs) SET_VGA(VgaBDF, bdf); }

- int ret = vgahw_init(); + int ret = vgahw_setup(); if (ret) { dprintf(1, "Failed to initialize VGA hardware. Exiting.\n"); return; diff --git a/vgasrc/vgahw.h b/vgasrc/vgahw.h index 044cd32..f69a5ac 100644 --- a/vgasrc/vgahw.h +++ b/vgasrc/vgahw.h @@ -7,7 +7,7 @@ #include "clext.h" // clext_set_mode #include "bochsvga.h" // bochsvga_set_mode #include "stdvga.h" // stdvga_set_mode -#include "geodevga.h" // geodevga_init +#include "geodevga.h" // geodevga_setup

static inline struct vgamode_s *vgahw_find_mode(int mode) { if (CONFIG_VGA_CIRRUS) @@ -34,14 +34,14 @@ static inline void vgahw_list_modes(u16 seg, u16 *dest, u16 *last) { stdvga_list_modes(seg, dest, last); }

-static inline int vgahw_init(void) { +static inline int vgahw_setup(void) { if (CONFIG_VGA_CIRRUS) - return clext_init(); + return clext_setup(); if (CONFIG_VGA_BOCHS) - return bochsvga_init(); + return bochsvga_setup(); if (CONFIG_VGA_GEODEGX2 || CONFIG_VGA_GEODELX) - return geodevga_init(); - return stdvga_init(); + return geodevga_setup(); + return stdvga_setup(); }

static inline int vgahw_get_window(struct vgamode_s *vmode_g, int window) {

-- 1.7.11.7

Kevin O'Connor

7:07 a.m.

New subject: [PATCH 3/3] POST: Reorganize post init functions for better grouping and reusability.

Place the "interface initialization" functions together, "platform hardware initialization" functions together, and "prepare to boot" functions together. This may also be useful for using SeaBIOS as a CSM.

This slightly changes the order of some function invocations, but should otherwise not change code behavior at all.

Signed-off-by: Kevin O'Connor kevin@koconnor.net --- src/boot.c | 16 ++-- src/boot.h | 3 +- src/bootsplash.c | 2 + src/post.c | 255 ++++++++++++++++++++++++++++++------------------------- 4 files changed, 148 insertions(+), 128 deletions(-)

diff --git a/src/boot.c b/src/boot.c index 2cb3b86..3bafa5a 100644 --- a/src/boot.c +++ b/src/boot.c @@ -392,9 +392,11 @@ boot_add_cbfs(void *data, const char *desc, int prio) #define DEFAULT_BOOTMENU_WAIT 2500

// Show IPL option menu. -static void +void interactive_bootmenu(void) { + // XXX - show available drives? + if (! CONFIG_BOOTMENU || ! qemu_cfg_show_boot_menu()) return;

@@ -476,18 +478,10 @@ add_bev(int type, u32 vector)

// Prepare for boot - show menu and run bcvs. void -boot_prepboot(void) +bcv_prepboot(void) { - if (! CONFIG_BOOT) { - wait_threads(); + if (! CONFIG_BOOT) return; - } - - // XXX - show available drives? - - // Allow user to modify BCV/IPL order. - interactive_bootmenu(); - wait_threads();

int haltprio = find_prio("HALT"); if (haltprio >= 0) diff --git a/src/boot.h b/src/boot.h index 4a93d0f..4d4943b 100644 --- a/src/boot.h +++ b/src/boot.h @@ -11,7 +11,8 @@ void boot_add_floppy(struct drive_s *drive_g, const char *desc, int prio); void boot_add_hd(struct drive_s *drive_g, const char *desc, int prio); void boot_add_cd(struct drive_s *drive_g, const char *desc, int prio); void boot_add_cbfs(void *data, const char *desc, int prio); -void boot_prepboot(void); +void interactive_bootmenu(void); +void bcv_prepboot(void); struct pci_device; int bootprio_find_pci_device(struct pci_device *pci); int bootprio_find_scsi_device(struct pci_device *pci, int target, int lun); diff --git a/src/bootsplash.c b/src/bootsplash.c index 3aac459..84fca7f 100644 --- a/src/bootsplash.c +++ b/src/bootsplash.c @@ -12,6 +12,7 @@ #include "jpeg.h" // splash #include "vbe.h" // struct vbe_info #include "bmp.h" // bmp_alloc +#include "smbios.h" // display_uuid

/**************************************************************** @@ -46,6 +47,7 @@ enable_vga_console(void)

// Write to screen. printf("SeaBIOS (version %s)\n", VERSION); + display_uuid(); }

static int diff --git a/src/post.c b/src/post.c index 6f5dfef..dbf4944 100644 --- a/src/post.c +++ b/src/post.c @@ -31,11 +31,69 @@ #include "esp-scsi.h" // esp_scsi_setup #include "megasas.h" // megasas_setup

+ /**************************************************************** * BIOS init ****************************************************************/

static void +ramsize_preinit(void) +{ + dprintf(3, "Find memory size\n"); + if (CONFIG_COREBOOT) { + coreboot_preinit(); + } else if (usingXen()) { + xen_ramsize_preinit(); + } else { + // On emulators, get memory size from nvram. + u32 rs = ((inb_cmos(CMOS_MEM_EXTMEM2_LOW) << 16) + | (inb_cmos(CMOS_MEM_EXTMEM2_HIGH) << 24)); + if (rs) + rs += 16 * 1024 * 1024; + else + rs = (((inb_cmos(CMOS_MEM_EXTMEM_LOW) << 10) + | (inb_cmos(CMOS_MEM_EXTMEM_HIGH) << 18)) + + 1 * 1024 * 1024); + RamSize = rs; + add_e820(0, rs, E820_RAM); + + // Check for memory over 4Gig + u64 high = ((inb_cmos(CMOS_MEM_HIGHMEM_LOW) << 16) + | ((u32)inb_cmos(CMOS_MEM_HIGHMEM_MID) << 24) + | ((u64)inb_cmos(CMOS_MEM_HIGHMEM_HIGH) << 32)); + RamSizeOver4G = high; + add_e820(0x100000000ull, high, E820_RAM); + + /* reserve 256KB BIOS area at the end of 4 GB */ + add_e820(0xfffc0000, 256*1024, E820_RESERVED); + } + + // Don't declare any memory between 0xa0000 and 0x100000 + add_e820(BUILD_LOWRAM_END, BUILD_BIOS_ADDR-BUILD_LOWRAM_END, E820_HOLE); + + // Mark known areas as reserved. + add_e820(BUILD_BIOS_ADDR, BUILD_BIOS_SIZE, E820_RESERVED); + + u32 count = qemu_cfg_e820_entries(); + if (count) { + struct e820_reservation entry; + int i; + + for (i = 0; i < count; i++) { + qemu_cfg_e820_load_next(&entry); + add_e820(entry.address, entry.length, entry.type); + } + } else if (kvm_para_available()) { + // Backwards compatibility - provide hard coded range. + // 4 pages before the bios, 3 pages for vmx tss pages, the + // other page for EPT real mode pagetable + add_e820(0xfffbc000, 4*4096, E820_RESERVED); + } + + dprintf(1, "Ram Size=0x%08x (0x%016llx high)\n", RamSize, RamSizeOver4G); +} + +static void ivt_init(void) { dprintf(3, "init ivt\n"); @@ -101,81 +159,27 @@ bda_init(void) }

static void -ramsize_preinit(void) +interface_init(void) { - dprintf(3, "Find memory size\n"); - if (CONFIG_COREBOOT) { - coreboot_preinit(); - } else if (usingXen()) { - xen_ramsize_preinit(); - } else { - // On emulators, get memory size from nvram. - u32 rs = ((inb_cmos(CMOS_MEM_EXTMEM2_LOW) << 16) - | (inb_cmos(CMOS_MEM_EXTMEM2_HIGH) << 24)); - if (rs) - rs += 16 * 1024 * 1024; - else - rs = (((inb_cmos(CMOS_MEM_EXTMEM_LOW) << 10) - | (inb_cmos(CMOS_MEM_EXTMEM_HIGH) << 18)) - + 1 * 1024 * 1024); - RamSize = rs; - add_e820(0, rs, E820_RAM); - - // Check for memory over 4Gig - u64 high = ((inb_cmos(CMOS_MEM_HIGHMEM_LOW) << 16) - | ((u32)inb_cmos(CMOS_MEM_HIGHMEM_MID) << 24) - | ((u64)inb_cmos(CMOS_MEM_HIGHMEM_HIGH) << 32)); - RamSizeOver4G = high; - add_e820(0x100000000ull, high, E820_RAM); - - /* reserve 256KB BIOS area at the end of 4 GB */ - add_e820(0xfffc0000, 256*1024, E820_RESERVED); - } - - // Don't declare any memory between 0xa0000 and 0x100000 - add_e820(BUILD_LOWRAM_END, BUILD_BIOS_ADDR-BUILD_LOWRAM_END, E820_HOLE); - - // Mark known areas as reserved. - add_e820(BUILD_BIOS_ADDR, BUILD_BIOS_SIZE, E820_RESERVED); - - u32 count = qemu_cfg_e820_entries(); - if (count) { - struct e820_reservation entry; - int i; - - for (i = 0; i < count; i++) { - qemu_cfg_e820_load_next(&entry); - add_e820(entry.address, entry.length, entry.type); - } - } else if (kvm_para_available()) { - // Backwards compatibility - provide hard coded range. - // 4 pages before the bios, 3 pages for vmx tss pages, the - // other page for EPT real mode pagetable - add_e820(0xfffbc000, 4*4096, E820_RESERVED); - } - - dprintf(1, "Ram Size=0x%08x (0x%016llx high)\n", RamSize, RamSizeOver4G); -} - -static void -biostable_setup(void) -{ - if (CONFIG_COREBOOT) { - coreboot_biostable_setup(); - return; - } - if (usingXen()) { - xen_biostable_setup(); - return; - } - - pirtable_setup(); + // Running at new code address - do code relocation fixups + malloc_fixupreloc_init();

- mptable_setup(); + // Setup romfile items. + qemu_romfile_init(); + coreboot_cbfs_init();

- smbios_setup(); + // Setup ivt/bda/ebda + ivt_init(); + bda_init();

- acpi_setup(); + // Other interfaces + mathcp_init(); + boot_init(); + bios32_init(); + pmm_init(); + pnp_init(); + kbd_init(); + mouse_init(); }

// Initialize hardware devices @@ -199,39 +203,33 @@ device_hardware_setup(void) megasas_setup(); }

-// Begin the boot process by invoking an int0x19 in 16bit mode. static void -startBoot(void) +biostable_setup(void) { - // Clear low-memory allocations (required by PMM spec). - memset((void*)BUILD_STACK_ADDR, 0, BUILD_EBDA_MINIMUM - BUILD_STACK_ADDR); + if (CONFIG_COREBOOT) { + coreboot_biostable_setup(); + return; + } + if (usingXen()) { + xen_biostable_setup(); + return; + }

- dprintf(3, "Jump to int19\n"); - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x19, &br); -} + pirtable_setup();

-// Main setup code. -void VISIBLE32INIT -maininit(void) -{ - // Running at new code address - do code relocation fixups - malloc_fixupreloc_init(); + mptable_setup();

- // Setup romfile items. - qemu_romfile_init(); - coreboot_cbfs_init(); + smbios_setup();

- // Setup ivt/bda/ebda - ivt_init(); - bda_init(); + acpi_setup(); +}

+static void +platform_hardware_setup(void) +{ // Init base pc hardware. pic_setup(); timer_setup(); - mathcp_init();

// Initialize pci pci_setup(); @@ -243,9 +241,6 @@ maininit(void) // Setup Xen hypercalls xen_hypercall_setup();

- // Initialize internal tables - boot_init(); - // Start hardware initialization (if optionrom threading) if (CONFIG_THREADS && CONFIG_THREAD_OPTIONROMS) device_hardware_setup(); @@ -253,20 +248,39 @@ maininit(void) // Find and initialize other cpus smp_setup();

- // Setup interfaces that option roms may need - bios32_init(); - pmm_init(); - pnp_init(); - kbd_init(); - mouse_init(); + // Setup external BIOS interface tables biostable_setup(); +} + +static void +prepareboot(void) +{ + // Run BCVs + bcv_prepboot(); + + // Finalize data structures before boot + cdrom_prepboot(); + pmm_prepboot(); + malloc_prepboot(); + memmap_prepboot(); + + // Setup bios checksum. + BiosChecksum -= checksum((u8*)BUILD_BIOS_ADDR, BUILD_BIOS_SIZE); +} + +// Main setup code. +void VISIBLE32INIT +maininit(void) +{ + // Initialize internal interfaces. + interface_init(); + + // Setup platform devices. + platform_hardware_setup();

// Run vga option rom vgarom_setup();

- // SMBIOS tables and VGA console are ready, print UUID - display_uuid(); - // Do hardware initialization (if running synchronously) if (!CONFIG_THREADS || !CONFIG_THREAD_OPTIONROMS) { device_hardware_setup(); @@ -276,22 +290,31 @@ maininit(void) // Run option roms optionrom_setup();

- // Run BCVs and show optional boot menu - boot_prepboot(); + // Allow user to modify overall boot order. + interactive_bootmenu(); + wait_threads();

- // Finalize data structures before boot - cdrom_prepboot(); - pmm_prepboot(); - malloc_prepboot(); - memmap_prepboot(); - - // Setup bios checksum. - BiosChecksum -= checksum((u8*)BUILD_BIOS_ADDR, BUILD_BIOS_SIZE); + // Prepare for boot. + prepareboot();

// Write protect bios memory. make_bios_readonly(); }

+// Begin the boot process by invoking an int0x19 in 16bit mode. +static void +startBoot(void) +{ + // Clear low-memory allocations (required by PMM spec). + memset((void*)BUILD_STACK_ADDR, 0, BUILD_EBDA_MINIMUM - BUILD_STACK_ADDR); + + dprintf(3, "Jump to int19\n"); + struct bregs br; + memset(&br, 0, sizeof(br)); + br.flags = F_IF; + call16_int(0x19, &br); +} +

/**************************************************************** * POST entry and code relocation

-- 1.7.11.7

David Woodhouse

3:07 p.m.

Looks good, thanks. I've updated the tree at git:// and http://git.infradead.org/users/dwmw2/seabios.git/ to be based on it.

My build now only has 480 bytes of '32bit flat init size'; I suspect I need to mark a whole bunch of functions as VISIBLE32INIT as well as just making them non-static.

I'm still having to hack platform_hardware_setup() somewhat — although I could probably get away with just calling timer_setup() and pci_probe_devices() instead of using it at all.

But we're getting there...

-- dwmw2

4352

days inactive

4352

days old

seabios@seabios.org

4 comments

2 participants

tags (0)

participants (2)

David Woodhouse
Kevin O'Connor