Re: [SeaBIOS] Problem with boot coreboot

[Mike Banon]

Dear friend, have you tried this advice (given at your coreboot thread) :

For the beginning, I recommend you to check if you could boot anything
at all. In example, try making an Ubuntu LiveUSB from a spare USB
flash drive,
and using SeaBIOS try booting from it. If it is working, you could
also try installing Ubuntu to a spare Hard Drive and also try booting
for it.
If all this is working (means the SeaBIOS booting capabilities are
fully functional both for USB and SATA interfaces) - while booting
FreeBSD still doesn't work - that means something is wrong either with
FreeBSD installation or (more likely) its partition table or maybe
GRUB2 is corrupted. Then you could try restoring GRUB2, by following
these instructions for example -
https://howtoubuntu.org/how-to-repair-restore-reinstall-grub-2-with-a-ubuntu...

If yes, it didn't help you?

Best regards,
Mike Banon

On Wed, Aug 8, 2018 at 6:57 PM, zahra rahimkhani
 wrote:
> Hello friends
>
> I compiled coreboot and seabios based on
> https://review.coreboot.org/cgit/board-status.git/plain/intel/minnowmax/4.5-...
>
> but my Freebsd or grub2 or Debian or ubuntu  did not boot and it  shows
> this message.
>
> Running option rom at c000:0003
> Turning on vga text mode console
> SeaBIOS (version rel-1.11.2-0-gf9626cc)
> EHCI init on dev 00:1d.0 (regs=0xd061e020)
> WARNING - Timeout at i8042_flush:71!
> AHCI controller at 00:13.0, iobase 0xd061d000, irq 10
> Searching bootorder for: /pci@i0cf8/*@12
> Found 0 lpt ports
> Found 1 serial ports
> Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/storage@1/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/usb-*@1
> USB MSC vendor='UFD 2.0' product='Silicon-Power8G' rev='1100' type=0
> removable=1
> USB MSC blksize=512 sectors=15730688
> Initialized USB HUB (1 ports used)
> All threads complete.
> Scan for option roms
>
> Press ESC for boot menu.
>
> Searching bootorder for: HALT
> drive 0x000f62c0: PCHS=0/0/0 translation=lba LCHS=979/255/63 s=15730688
> Space available for UMB: cd800-ed800, f5b60-f62c0
> Returned 253952 bytes of ZoneHigh
> e820 map has 18 items:
>   0: 0000000000000000 - 000000000009fc00 = 1 RAM
>   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
>   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
>   3: 0000000000100000 - 0000000020000000 = 1 RAM
>   4: 0000000020000000 - 0000000020100000 = 2 RESERVED
>   5: 0000000020100000 - 000000007ad9c000 = 1 RAM
>   6: 000000007ad9c000 - 0000000080000000 = 2 RESERVED
>   7: 00000000e0000000 - 00000000f0000000 = 2 RESERVED
>   8: 00000000feb00000 - 00000000fec01000 = 2 RESERVED
>   9: 00000000fed01000 - 00000000fed02000 = 2 RESERVED
>   10: 00000000fed03000 - 00000000fed04000 = 2 RESERVED
>   11: 00000000fed05000 - 00000000fed06000 = 2 RESERVED
>   12: 00000000fed08000 - 00000000fed09000 = 2 RESERVED
>   13: 00000000fed0c000 - 00000000fed10000 = 2 RESERVED
>   14: 00000000fed1c000 - 00000000fed1d000 = 2 RESERVED
>   15: 00000000fee00000 - 00000000fee01000 = 2 RESERVED
>   16: 00000000fef00000 - 00000000ff000000 = 2 RESERVED
>   17: 00000000ff800000 - 0000000100000000 = 2 RESERVED
> enter handle_19:
>   NULL
> Booting from Hard Disk...
> Booting from 0000:7c00
>
> I would be grateful if you guide me .
>
> Thanks,
> Zahra
>
> SeaBIOS mailing list
> [e-mail]
> https://mail.coreboot.org/mailman/listinfo/seabios