Re: [SeaBIOS] SeaBIOS recognising USB 3.0 on boot works - partly

[Kevin O'Connor]

On Sun, Dec 13, 2015 at 10:49:30AM +0000, edward wandasiewicz wrote:
> With both the Philips USB and Mushkin USB plugged in on boot, I'm
> still getting 4 different scenarios appearing.
> Philips Only
> Mushkin Only
> Both recognised - listed once and once only
> Both recognised - Mushkin once, but the Philips listed twice
>
> I've attached
>
> $cbmem -c
>
> for each scenario

Thanks.  It looks like the usb code wasn't waiting for USB3 devices to
be "enabled" before trying to talk to them.  Can you pull down the
"testing" branch again and retry?

Also, the logs are quite large and they are exceeding the mailing list
limits - going forward can you gzip the logs and attach them to your
emails.

-Kevin

SeaBIOS recognising USB 3.0 on boot works - partly

[edward wandasiewicz]

Hooray, it works... minus 2 scenarios :(

With both Philips USB and Mushkin USB attached, and I perform a cold boot

1. YES - USB 3 & USB 3 - once each (Philips & Mushkin)

cbmem.yes.both.USB3.USB3.gz

2. NO - USB 3 & USB 3 - once each (Philips & Muskin) - but double
Philips showing

cbmem.yes.both.USB3.USB3.DoublePhilips.gz

3. YES - USB 3 & Type C - once each (Philips & Mushkin)

cbmem.yes.both.USB3.TypeC.gz

I can't get a double Philips to appear

4. YES - Type C & Type C - once each (Philips & Mushkin)

cbmem.yes.both.TypeC.TypeC.gz

5. NO - Type C & Type C - one Philiips & no Mushkin

I forgot to save

$ cbmem -c

and now can't replicate it. :(

When I do, I will post output.

Edward.

On Sun, Dec 13, 2015 at 7:53 PM, Kevin O'Connor  wrote:
> On Sun, Dec 13, 2015 at 10:49:30AM +0000, edward wandasiewicz wrote:
> > With both the Philips USB and Mushkin USB plugged in on boot, I'm
> > still getting 4 different scenarios appearing.
> > Philips Only
> > Mushkin Only
> > Both recognised - listed once and once only
> > Both recognised - Mushkin once, but the Philips listed twice
> >
> > I've attached
> >
> > $cbmem -c
> >
> > for each scenario
>
> Thanks.  It looks like the usb code wasn't waiting for USB3 devices to
> be "enabled" before trying to talk to them.  Can you pull down the
> "testing" branch again and retry?
>
> Also, the logs are quite large and they are exceeding the mailing list
> limits - going forward can you gzip the logs and attach them to your
> emails.
>
> -Kevin