This is v2 of the ACPI memory hotplug prototype for x86_64 target.
Changes v1->v2
- memory map is automatically calculated for hotplug dimms. Dimms are added from top-of-memory skipping the pci hole at [PCI_HOLE_START, 4G). - Renamed from "-memslot" to "-dimm". Commands changed to "dimm_add", "dimm_del". - Seabios ejection array reduced to a byte. Use extraction macros for dimm ssdt. - additional SRAT paravirt info does not break previous SRAT fw_cfg layout. - Documentation of new acpi_piix4 registers and paravirt data. - add ACPI _OST support for _OST enabled guests. This allows qemu to receive notification for success / failure of memory hot-add and hot-remove operations. Guest needs to support _OST (https://lkml.org/lkml/2012/6/25/321) - add monitor info command to report total guest memory (initial + hot-added) - add command line options and monitor commands for batch dimm creation/population
Overview:
Dimm devices are modeled with a new qemu command line
"-dimm id=name,size=sz,node=pxm,populated=on|off"
As already mentioned, the starting physical address for all dimms is calculated automatically from top of memory, skipping the pci hole at [PCI_HOLE_START, 4G). Node is defining numa proximity for this dimm. When not defined it defaults to zero. "-dimm id=dimm0,size=512M,node=0,populated=off" will define a 512M memory slot belonging to numa node 0.
Dimms are added or removed with a new hmp command "dimm_add/dimm_del": Hot-add syntax: "dimm_add id" Hot-remove syntax: "dimm_del id"
Issues:
- Live migration works as long as populated field is changed to "on" for hotplugged dimms at the destination qemu command line (patch 12/21 lifts this requirement). The DimmState structure does not yet define a VMStateDescription, but i assume this is the preferred way to pass state for migration.
- Dimms are abstracted as qdevices attached to the main system bus. However, memory hotplugging has its own side channel ignoring main_system_bus's hotplug incapability. A cleaner integration is still needed, probably attaching memory devices as children-links of an acpi-capable device (in the pc case acpi_piix4) instead of the system bus (TBD). Then device_add/device_del instead of new commands can hopefully be used.
Comments/review welcome.
series is based on uq/master for qemu-kvm, and master for seabios. Can be found also at: http://github.com/vliaskov/qemu-kvm/commits/memhp-v2 http://github.com/vliaskov/seabios/commits/memhp-v2
Vasilis Liaskovitis (14): dimm: Implement memory device abstraction acpi_piix4: Implement memory device hotplug registers pc: calculate dimm physical addresses and adjust memory map pc: Add dimm paravirt SRAT info Implement "-dimm" command line option Implement dimm_add and dimm_del commands for hmp and qmp fix live-migration when "populated=on" is missing Implement memory hotplug notification lists acpi_piix4: _OST dimm support acpi_piix4: Update dimm state on VM reboot acpi_piix4: Update dimm bitmap state on hot-remove fail Implement "info memtotal" and "query-memtotal" Implement -dimms, -dimmspop command line options Implement mem_increase, mem_decrease hmp/qmp commands
arch_init.c | 23 ++- docs/specs/acpi_hotplug.txt | 46 +++++ docs/specs/fwcfg.txt | 28 +++ hmp-commands.hx | 67 +++++++ hmp.c | 24 +++ hmp.h | 2 + hw/Makefile.objs | 2 +- hw/acpi_piix4.c | 131 ++++++++++++- hw/dimm.c | 449 +++++++++++++++++++++++++++++++++++++++++++ hw/dimm.h | 72 +++++++ hw/pc.c | 94 +++++++++- hw/pc.h | 6 + hw/pc_piix.c | 18 ++- monitor.c | 35 ++++ monitor.h | 5 + qapi-schema.json | 38 ++++ qemu-config.c | 70 +++++++ qemu-options.hx | 15 ++ qmp-commands.hx | 137 +++++++++++++ sysemu.h | 1 + vl.c | 122 ++++++++++++- 21 files changed, 1368 insertions(+), 17 deletions(-) create mode 100644 docs/specs/acpi_hotplug.txt create mode 100644 docs/specs/fwcfg.txt create mode 100644 hw/dimm.c create mode 100644 hw/dimm.h
Vasilis Liaskovitis (7): Add ACPI_EXTRACT_DEVICE* macros Add SSDT memory device support acpi-dsdt: Implement functions for memory hotplug. acpi: generate hotplug memory devices. pciinit: Fix pcimem_start value acpi_dsdt: Support _OST dimm method acpi_dsdt: Revert internal dimm state on _OST failure
Makefile | 2 +- src/acpi-dsdt.dsl | 120 ++++++++++++++++++++++++++++++++++++- src/acpi.c | 158 +++++++++++++++++++++++++++++++++++++++++++++++-- src/pciinit.c | 2 +- src/ssdt-mem.dsl | 69 +++++++++++++++++++++ tools/acpi_extract.py | 28 +++++++++ 6 files changed, 369 insertions(+), 10 deletions(-) create mode 100644 src/ssdt-mem.dsl
-
Vasilis Liaskovitis