Re: [SeaBIOS] Booting Linux, FreeBSD off AHCI takes longer than expected

[Idwer Vollering]

2013/9/27 Idwer Vollering <[e-mail]>:
> Linux takes somewhere between 30 to 60 seconds from the grub menu to
> show early bootup console output, FreeBSD takes over 10 minutes to
> just load boot0, boot2 and kernel (and every module from
> /boot/loader.conf), then shows its boot menu [1].

So, after digging into this deeper I came to the conclusion that
setting CONFIG_DEBUG_SERIAL=n in SeaBIOS' .config was the culprit.

Could setting CONFIG_DEBUG_SERIAL=y be blocking?

Idwer