Re: [SeaBIOS] Failure to detect high-capacity SD card

[Kevin O'Connor]

On Thu, Oct 26, 2017 at 10:46:06AM -0400, Matt DeVillier wrote:
> On Thu, Oct 26, 2017 at 12:56 AM, Kevin O'Connor  wrote:
> > Does the patch below help?
> >
> > -Kevin
> >
> > --- a/src/hw/sdcard.c
> > +++ b/src/hw/sdcard.c
> > @@ -405,6 +405,7 @@ sdcard_card_setup(struct sddrive_s *drive, int volt,
> > int prio)
> >      if (!ret && param[0] == vrange)
> >          hcs = (1<<30);
> >      // Verify SD card (instead of MMC or SDIO)
> > +#if 0
> >      param[0] = 0x00;
> >      ret = sdcard_pio_app(regs, SC_APP_SEND_OP_COND, param);
> >      if (ret) {
> > @@ -416,6 +417,7 @@ sdcard_card_setup(struct sddrive_s *drive, int volt,
> > int prio)
> >          drive->card_type |= SF_MMC;
> >          hcs = (1<<30);
> >      }
> > +#endif
> >      // Init card
> >      u32 end = timer_calc(SDHCI_POWERUP_TIMEOUT);
> >      for (;;) {
>
> with the patch applied, neither the internal eMMC nor the large-capacity
> external SD card are detected

Yeah - this disables MMC.  Any chance to get the log from this run?
(Let me know if eMMC is needed to get the log.)

-Kevin

Failure to detect high-capacity SD card

[Matt DeVillier]

On Thu, Oct 26, 2017 at 10:59 AM, Kevin O'Connor  wrote:
> On Thu, Oct 26, 2017 at 10:46:06AM -0400, Matt DeVillier wrote:
> > On Thu, Oct 26, 2017 at 12:56 AM, Kevin O'Connor
>
> wrote:
> > > Does the patch below help?
> > >
> > > -Kevin
> > >
> > > --- a/src/hw/sdcard.c
> > > +++ b/src/hw/sdcard.c
> > > @@ -405,6 +405,7 @@ sdcard_card_setup(struct sddrive_s *drive, int
>
> volt,
> > > int prio)
> > >      if (!ret && param[0] == vrange)
> > >          hcs = (1<<30);
> > >      // Verify SD card (instead of MMC or SDIO)
> > > +#if 0
> > >      param[0] = 0x00;
> > >      ret = sdcard_pio_app(regs, SC_APP_SEND_OP_COND, param);
> > >      if (ret) {
> > > @@ -416,6 +417,7 @@ sdcard_card_setup(struct sddrive_s *drive, int
>
> volt,
> > > int prio)
> > >          drive->card_type |= SF_MMC;
> > >          hcs = (1<<30);
> > >      }
> > > +#endif
> > >      // Init card
> > >      u32 end = timer_calc(SDHCI_POWERUP_TIMEOUT);
> > >      for (;;) {
> >
> > with the patch applied, neither the internal eMMC nor the large-capacity
> > external SD card are detected
>
> Yeah - this disables MMC.  Any chance to get the log from this run?
> (Let me know if eMMC is needed to get the log.)
>
> -Kevin

with the patch, USB devices are not available from the boot menu either (it
appears to hang?), and therefore device cannot be booted to get said log