SeaBIOS USB issues

[Sorin Pop]

Hi
   I have tried to get SeaBIOS to enable usb and mouse support but seabios
always gets stuck while I have USB enabled and the devices connected
(regardless if it is just the keyboard, mouse, usb mass storage or any
combination of them)
   Below I have attached the logs from coreboot and seabios (I have tested
both 1.11 and 1.16 and none work)
   Does anyone have any clue on what might be the problem?

Thanks

USB issues: WARNING - internal error detected at pci_enable_iobar:158!

[Paul Menzel]

Dear Sorin,

Your message seems to have been approved by the moderators only 
yesterday, on December 1st.

Am 25.10.22 um 16:23 schrieb Sorin Pop:
> I have tried to get SeaBIOS to enable usb and mouse support but seabios
>
> always gets stuck while I have USB enabled and the devices connected
> (regardless if it is just the keyboard, mouse, usb mass storage or any
> combination of them)
>     Below I have attached the logs from coreboot and seabios (I have tested
> both 1.11 and 1.16 and none work)

The coreboot port is based on the very old coreboot 4.7. Also, the 
device *Packeteer 6500* does not seem to be or ever have been in 
coreboot upstream?
> Does anyone have any clue on what might be the problem?

I only see:

WARNING - internal error detected at pci_enable_iobar:158!

Please paste the logs with SeaBIOS built from the master branch, and 
with debug level 5.

My gut feeling is though, that the coreboot port is incomplete.

Does it work with another payload like GRUB, Linux kernel or a 
libpayload based one like FILO?

Kind regards,

Paul