v1:
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead.
In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization.
By supplying the logical geometies directly we are able to support such "exotic" disks.
We will use fw_cfg to do just that.
v2:
Fix missing parenthesis check in "hd-geo-test: Add tests for lchs override"
v3:
* Rename fw_cfg key to "bios-geometry". * Remove "extendible" interface. * Add cpu_to_le32 fix as Laszlo suggested or big endian hosts * Fix last qtest commit - automatic docker tester for some reason does not have qemu-img set
v4:
* Change fw_cfg interface from mixed textual/binary to textual only
Sam Eiderman (8): block: Refactor macros - fix tabbing block: Support providing LCHS from user bootdevice: Add interface to gather LCHS scsi: Propagate unrealize() callback to scsi-hd bootdevice: Gather LCHS from all relevant devices bootdevice: Refactor get_boot_devices_list bootdevice: FW_CFG interface for LCHS values hd-geo-test: Add tests for lchs override
bootdevice.c | 148 +++++++++--- hw/block/virtio-blk.c | 6 + hw/ide/qdev.c | 7 +- hw/nvram/fw_cfg.c | 14 +- hw/scsi/scsi-bus.c | 15 ++ hw/scsi/scsi-disk.c | 14 ++ include/hw/block/block.h | 22 +- include/hw/scsi/scsi.h | 1 + include/sysemu/sysemu.h | 4 + tests/Makefile.include | 2 +- tests/hd-geo-test.c | 581 +++++++++++++++++++++++++++++++++++++++++++++++ 11 files changed, 773 insertions(+), 41 deletions(-)
Fixing tabbing in block related macros.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- hw/ide/qdev.c | 2 +- include/hw/block/block.h | 16 ++++++++-------- 2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c index 360cd20bd8..9cae3205df 100644 --- a/hw/ide/qdev.c +++ b/hw/ide/qdev.c @@ -285,7 +285,7 @@ static void ide_drive_realize(IDEDevice *dev, Error **errp) DEFINE_BLOCK_PROPERTIES(IDEDrive, dev.conf), \ DEFINE_BLOCK_ERROR_PROPERTIES(IDEDrive, dev.conf), \ DEFINE_PROP_STRING("ver", IDEDrive, dev.version), \ - DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \ + DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \ DEFINE_PROP_STRING("serial", IDEDrive, dev.serial),\ DEFINE_PROP_STRING("model", IDEDrive, dev.model)
diff --git a/include/hw/block/block.h b/include/hw/block/block.h index 607539057a..fd55a30bca 100644 --- a/include/hw/block/block.h +++ b/include/hw/block/block.h @@ -50,21 +50,21 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf) _conf.logical_block_size), \ DEFINE_PROP_BLOCKSIZE("physical_block_size", _state, \ _conf.physical_block_size), \ - DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \ + DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \ DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0), \ - DEFINE_PROP_UINT32("discard_granularity", _state, \ - _conf.discard_granularity, -1), \ - DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \ - ON_OFF_AUTO_AUTO), \ + DEFINE_PROP_UINT32("discard_granularity", _state, \ + _conf.discard_granularity, -1), \ + DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \ + ON_OFF_AUTO_AUTO), \ DEFINE_PROP_BOOL("share-rw", _state, _conf.share_rw, false)
#define DEFINE_BLOCK_PROPERTIES(_state, _conf) \ DEFINE_PROP_DRIVE("drive", _state, _conf.blk), \ DEFINE_BLOCK_PROPERTIES_BASE(_state, _conf)
-#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ - DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ - DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ +#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ + DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ + DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0)
#define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \
Add logical geometry variables to BlockConf.
A user can now supply "lcyls", "lheads" & "lsecs" for any HD device that supports CHS ("cyls", "heads", "secs").
These devices include: * ide-hd * scsi-hd * virtio-blk-pci
In future commits we will use the provided LCHS and pass it to the BIOS through fw_cfg to be supplied using INT13 routines.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- include/hw/block/block.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/include/hw/block/block.h b/include/hw/block/block.h index fd55a30bca..d7246f3862 100644 --- a/include/hw/block/block.h +++ b/include/hw/block/block.h @@ -26,6 +26,7 @@ typedef struct BlockConf { uint32_t discard_granularity; /* geometry, not all devices use this */ uint32_t cyls, heads, secs; + uint32_t lcyls, lheads, lsecs; OnOffAuto wce; bool share_rw; BlockdevOnError rerror; @@ -65,7 +66,10 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf) #define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ - DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0) + DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0), \ + DEFINE_PROP_UINT32("lcyls", _state, _conf.lcyls, 0), \ + DEFINE_PROP_UINT32("lheads", _state, _conf.lheads, 0), \ + DEFINE_PROP_UINT32("lsecs", _state, _conf.lsecs, 0)
#define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \ DEFINE_PROP_BLOCKDEV_ON_ERROR("rerror", _state, _conf.rerror, \
Add an interface to provide direct logical CHS values for boot devices. We will use this interface in the next commits.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- bootdevice.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++ include/sysemu/sysemu.h | 3 +++ 2 files changed, 58 insertions(+)
diff --git a/bootdevice.c b/bootdevice.c index 1d225202f9..bc5e1c2de4 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -343,3 +343,58 @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex, /* initialize devices' bootindex property to -1 */ object_property_set_int(obj, -1, name, NULL); } + +typedef struct FWLCHSEntry FWLCHSEntry; + +struct FWLCHSEntry { + QTAILQ_ENTRY(FWLCHSEntry) link; + DeviceState *dev; + char *suffix; + uint32_t lcyls; + uint32_t lheads; + uint32_t lsecs; +}; + +static QTAILQ_HEAD(, FWLCHSEntry) fw_lchs = + QTAILQ_HEAD_INITIALIZER(fw_lchs); + +void add_boot_device_lchs(DeviceState *dev, const char *suffix, + uint32_t lcyls, uint32_t lheads, uint32_t lsecs) +{ + FWLCHSEntry *node; + + if (!lcyls && !lheads && !lsecs) { + return; + } + + assert(dev != NULL || suffix != NULL); + + node = g_malloc0(sizeof(FWLCHSEntry)); + node->suffix = g_strdup(suffix); + node->dev = dev; + node->lcyls = lcyls; + node->lheads = lheads; + node->lsecs = lsecs; + + QTAILQ_INSERT_TAIL(&fw_lchs, node, link); +} + +void del_boot_device_lchs(DeviceState *dev, const char *suffix) +{ + FWLCHSEntry *i; + + if (dev == NULL) { + return; + } + + QTAILQ_FOREACH(i, &fw_lchs, link) { + if ((!suffix || !g_strcmp0(i->suffix, suffix)) && + i->dev == dev) { + QTAILQ_REMOVE(&fw_lchs, i, link); + g_free(i->suffix); + g_free(i); + + break; + } + } +} diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index 61579ae71e..173dfbb539 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -171,6 +171,9 @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex, DeviceState *dev, Error **errp); void restore_boot_order(void *opaque); void validate_bootdevices(const char *devices, Error **errp); +void add_boot_device_lchs(DeviceState *dev, const char *suffix, + uint32_t lcyls, uint32_t lheads, uint32_t lsecs); +void del_boot_device_lchs(DeviceState *dev, const char *suffix);
/* handler to set the boot_device order for a specific type of MachineClass */ typedef void QEMUBootSetHandler(void *opaque, const char *boot_order,
We will need to add LCHS removal logic to scsi-hd's unrealize() in the next commit.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- hw/scsi/scsi-bus.c | 15 +++++++++++++++ include/hw/scsi/scsi.h | 1 + 2 files changed, 16 insertions(+)
diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c index c480553083..f6fe497a1a 100644 --- a/hw/scsi/scsi-bus.c +++ b/hw/scsi/scsi-bus.c @@ -55,6 +55,14 @@ static void scsi_device_realize(SCSIDevice *s, Error **errp) } }
+static void scsi_device_unrealize(SCSIDevice *s, Error **errp) +{ + SCSIDeviceClass *sc = SCSI_DEVICE_GET_CLASS(s); + if (sc->unrealize) { + sc->unrealize(s, errp); + } +} + int scsi_bus_parse_cdb(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf, void *hba_private) { @@ -213,11 +221,18 @@ static void scsi_qdev_realize(DeviceState *qdev, Error **errp) static void scsi_qdev_unrealize(DeviceState *qdev, Error **errp) { SCSIDevice *dev = SCSI_DEVICE(qdev); + Error *local_err = NULL;
if (dev->vmsentry) { qemu_del_vm_change_state_handler(dev->vmsentry); }
+ scsi_device_unrealize(dev, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + scsi_device_purge_requests(dev, SENSE_CODE(NO_SENSE)); blockdev_mark_auto_del(dev->conf.blk); } diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h index 426566a5c6..8cf71f910d 100644 --- a/include/hw/scsi/scsi.h +++ b/include/hw/scsi/scsi.h @@ -59,6 +59,7 @@ struct SCSIRequest { typedef struct SCSIDeviceClass { DeviceClass parent_class; void (*realize)(SCSIDevice *dev, Error **errp); + void (*unrealize)(SCSIDevice *dev, Error **errp); int (*parse_cdb)(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf, void *hba_private); SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
Relevant devices are: * ide-hd (and ide-cd, ide-drive) * scsi-hd (and scsi-cd, scsi-disk, scsi-block) * virtio-blk-pci
We do not call del_boot_device_lchs() for ide-* since we don't need to - IDE block devices do not support unplugging.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- hw/block/virtio-blk.c | 6 ++++++ hw/ide/qdev.c | 5 +++++ hw/scsi/scsi-disk.c | 14 ++++++++++++++ 3 files changed, 25 insertions(+)
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c index 06e57a4d39..787bbd768a 100644 --- a/hw/block/virtio-blk.c +++ b/hw/block/virtio-blk.c @@ -1182,6 +1182,11 @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp) blk_set_guest_block_size(s->blk, s->conf.conf.logical_block_size);
blk_iostatus_enable(s->blk); + + add_boot_device_lchs(dev, "/disk@0,0", + (&conf->conf)->lcyls, + (&conf->conf)->lheads, + (&conf->conf)->lsecs); }
static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp) @@ -1189,6 +1194,7 @@ static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp) VirtIODevice *vdev = VIRTIO_DEVICE(dev); VirtIOBlock *s = VIRTIO_BLK(dev);
+ del_boot_device_lchs(dev, "/disk@0,0"); virtio_blk_data_plane_destroy(s->dataplane); s->dataplane = NULL; qemu_del_vm_change_state_handler(s->change); diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c index 9cae3205df..07f429d5e3 100644 --- a/hw/ide/qdev.c +++ b/hw/ide/qdev.c @@ -215,6 +215,11 @@ static void ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind, Error **errp)
add_boot_device_path(dev->conf.bootindex, &dev->qdev, dev->unit ? "/disk@1" : "/disk@0"); + + add_boot_device_lchs(&dev->qdev, dev->unit ? "/disk@1" : "/disk@0", + (&dev->conf)->lcyls, + (&dev->conf)->lheads, + (&dev->conf)->lsecs); }
static void ide_dev_get_bootindex(Object *obj, Visitor *v, const char *name, diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c index 7b89ac798b..3451aefdea 100644 --- a/hw/scsi/scsi-disk.c +++ b/hw/scsi/scsi-disk.c @@ -2390,6 +2390,16 @@ static void scsi_realize(SCSIDevice *dev, Error **errp) blk_set_guest_block_size(s->qdev.conf.blk, s->qdev.blocksize);
blk_iostatus_enable(s->qdev.conf.blk); + + add_boot_device_lchs(&dev->qdev, NULL, + (&dev->conf)->lcyls, + (&dev->conf)->lheads, + (&dev->conf)->lsecs); +} + +static void scsi_unrealize(SCSIDevice *dev, Error **errp) +{ + del_boot_device_lchs(&dev->qdev, NULL); }
static void scsi_hd_realize(SCSIDevice *dev, Error **errp) @@ -2988,6 +2998,7 @@ static void scsi_hd_class_initfn(ObjectClass *klass, void *data) SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
sc->realize = scsi_hd_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_new_request; sc->unit_attention_reported = scsi_disk_unit_attention_reported; dc->desc = "virtual SCSI disk"; @@ -3019,6 +3030,7 @@ static void scsi_cd_class_initfn(ObjectClass *klass, void *data) SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
sc->realize = scsi_cd_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_new_request; sc->unit_attention_reported = scsi_disk_unit_attention_reported; dc->desc = "virtual SCSI CD-ROM"; @@ -3054,6 +3066,7 @@ static void scsi_block_class_initfn(ObjectClass *klass, void *data) SCSIDiskClass *sdc = SCSI_DISK_BASE_CLASS(klass);
sc->realize = scsi_block_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_block_new_request; sc->parse_cdb = scsi_block_parse_cdb; sdc->dma_readv = scsi_block_dma_readv; @@ -3095,6 +3108,7 @@ static void scsi_disk_class_initfn(ObjectClass *klass, void *data) SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
sc->realize = scsi_disk_realize; + sc->unrealize = scsi_unrealize; sc->alloc_req = scsi_new_request; sc->unit_attention_reported = scsi_disk_unit_attention_reported; dc->fw_name = "disk";
Move device name construction to a separate function.
We will reuse this function in the following commit to pass logical CHS parameters through fw_cfg much like we currently pass bootindex.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- bootdevice.c | 61 +++++++++++++++++++++++++++++++++--------------------------- 1 file changed, 34 insertions(+), 27 deletions(-)
diff --git a/bootdevice.c b/bootdevice.c index bc5e1c2de4..2b12fb85a4 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -202,6 +202,39 @@ DeviceState *get_boot_device(uint32_t position) return res; }
+static char *get_boot_device_path(DeviceState *dev, bool ignore_suffixes, + char *suffix) +{ + char *devpath = NULL, *s = NULL, *d, *bootpath; + + if (dev) { + devpath = qdev_get_fw_dev_path(dev); + assert(devpath); + } + + if (!ignore_suffixes) { + if (dev) { + d = qdev_get_own_fw_dev_path_from_handler(dev->parent_bus, dev); + if (d) { + assert(!suffix); + s = d; + } else { + s = g_strdup(suffix); + } + } else { + s = g_strdup(suffix); + } + } + + bootpath = g_strdup_printf("%s%s", + devpath ? devpath : "", + s ? s : ""); + g_free(devpath); + g_free(s); + + return bootpath; +} + /* * This function returns null terminated string that consist of new line * separated device paths. @@ -218,36 +251,10 @@ char *get_boot_devices_list(size_t *size) bool ignore_suffixes = mc->ignore_boot_device_suffixes;
QTAILQ_FOREACH(i, &fw_boot_order, link) { - char *devpath = NULL, *suffix = NULL; char *bootpath; - char *d; size_t len;
- if (i->dev) { - devpath = qdev_get_fw_dev_path(i->dev); - assert(devpath); - } - - if (!ignore_suffixes) { - if (i->dev) { - d = qdev_get_own_fw_dev_path_from_handler(i->dev->parent_bus, - i->dev); - if (d) { - assert(!i->suffix); - suffix = d; - } else { - suffix = g_strdup(i->suffix); - } - } else { - suffix = g_strdup(i->suffix); - } - } - - bootpath = g_strdup_printf("%s%s", - devpath ? devpath : "", - suffix ? suffix : ""); - g_free(devpath); - g_free(suffix); + bootpath = get_boot_device_path(i->dev, ignore_suffixes, i->suffix);
if (total) { list[total-1] = '\n';
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS.
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will report - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead.
In addition we cannot force SeaBIOS to rely on physical geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot report more than 16 physical heads when moved to an IDE controller, since the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization.
By supplying the logical geometries directly we are able to support such "exotic" disks.
We serialize this information in a similar way to the "bootorder" interface. The new fw_cfg entry is "bios-geometry".
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- bootdevice.c | 32 ++++++++++++++++++++++++++++++++ hw/nvram/fw_cfg.c | 14 +++++++++++--- include/sysemu/sysemu.h | 1 + 3 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/bootdevice.c b/bootdevice.c index 2b12fb85a4..b034ad7bdc 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -405,3 +405,35 @@ void del_boot_device_lchs(DeviceState *dev, const char *suffix) } } } + +/* Serialized as: (device name\0 + lchs struct) x devices */ +char *get_boot_devices_lchs_list(size_t *size) +{ + FWLCHSEntry *i; + size_t total = 0; + char *list = NULL; + + QTAILQ_FOREACH(i, &fw_lchs, link) { + char *bootpath; + char *chs_string; + size_t len; + + bootpath = get_boot_device_path(i->dev, false, i->suffix); + chs_string = g_strdup_printf("%s %" PRIu32 " %" PRIu32 " %" PRIu32, + bootpath, i->lcyls, i->lheads, i->lsecs); + + if (total) { + list[total - 1] = '\n'; + } + len = strlen(chs_string) + 1; + list = g_realloc(list, total + len); + memcpy(&list[total], chs_string, len); + total += len; + g_free(chs_string); + g_free(bootpath); + } + + *size = total; + + return list; +} diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c index 9f7b7789bc..c1230fe11c 100644 --- a/hw/nvram/fw_cfg.c +++ b/hw/nvram/fw_cfg.c @@ -916,13 +916,21 @@ void *fw_cfg_modify_file(FWCfgState *s, const char *filename,
static void fw_cfg_machine_reset(void *opaque) { + MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); + FWCfgState *s = opaque; void *ptr; size_t len; - FWCfgState *s = opaque; - char *bootindex = get_boot_devices_list(&len); + char *buf;
- ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)bootindex, len); + buf = get_boot_devices_list(&len); + ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)buf, len); g_free(ptr); + + if (!mc->legacy_fw_cfg_order) { + buf = get_boot_devices_lchs_list(&len); + ptr = fw_cfg_modify_file(s, "bios-geometry", (uint8_t *)buf, len); + g_free(ptr); + } }
static void fw_cfg_machine_ready(struct Notifier *n, void *data) diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index 173dfbb539..1ca8799588 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -174,6 +174,7 @@ void validate_bootdevices(const char *devices, Error **errp); void add_boot_device_lchs(DeviceState *dev, const char *suffix, uint32_t lcyls, uint32_t lheads, uint32_t lsecs); void del_boot_device_lchs(DeviceState *dev, const char *suffix); +char *get_boot_devices_lchs_list(size_t *size);
/* handler to set the boot_device order for a specific type of MachineClass */ typedef void QEMUBootSetHandler(void *opaque, const char *boot_order,
On Wed, Jun 19, 2019 at 12:29:04PM +0300, Sam Eiderman wrote:
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS.
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will report - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead.
In addition we cannot force SeaBIOS to rely on physical geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot report more than 16 physical heads when moved to an IDE controller, since the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization.
By supplying the logical geometries directly we are able to support such "exotic" disks.
We serialize this information in a similar way to the "bootorder" interface. The new fw_cfg entry is "bios-geometry".
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com
bootdevice.c | 32 ++++++++++++++++++++++++++++++++ hw/nvram/fw_cfg.c | 14 +++++++++++--- include/sysemu/sysemu.h | 1 + 3 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/bootdevice.c b/bootdevice.c index 2b12fb85a4..b034ad7bdc 100644 --- a/bootdevice.c +++ b/bootdevice.c @@ -405,3 +405,35 @@ void del_boot_device_lchs(DeviceState *dev, const char *suffix) } } }
+/* Serialized as: (device name\0 + lchs struct) x devices */
Comment is outdated.
- if (!mc->legacy_fw_cfg_order) {
buf = get_boot_devices_lchs_list(&len);
ptr = fw_cfg_modify_file(s, "bios-geometry", (uint8_t *)buf, len);
Can fw_cfg_modify_file handle buf == NULL?
cheers, Gerd
Add QTest tests to check the logical geometry override option.
The tests in hd-geo-test are out of date - they only test IDE and do not test interesting MBRs.
I added a few helper functions which will make adding more tests easier.
QTest's fw_cfg helper functions support only legacy fw_cfg, so I had to read the new fw_cfg layout on my own.
Creating qcow2 disks with specific size and MBR layout is currently unused - we only use a default empty MBR.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- tests/Makefile.include | 2 +- tests/hd-geo-test.c | 581 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 582 insertions(+), 1 deletion(-)
diff --git a/tests/Makefile.include b/tests/Makefile.include index 46a36c2c95..55ea165ed4 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -765,7 +765,7 @@ tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y) tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y) qemu-img$(EXESUF) tests/ipmi-kcs-test$(EXESUF): tests/ipmi-kcs-test.o tests/ipmi-bt-test$(EXESUF): tests/ipmi-bt-test.o -tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o +tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o $(libqos-obj-y) tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y) tests/boot-serial-test$(EXESUF): tests/boot-serial-test.o $(libqos-obj-y) tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ diff --git a/tests/hd-geo-test.c b/tests/hd-geo-test.c index 62eb624726..597678e118 100644 --- a/tests/hd-geo-test.c +++ b/tests/hd-geo-test.c @@ -17,7 +17,12 @@
#include "qemu/osdep.h" #include "qemu-common.h" +#include "qemu/bswap.h" +#include "qapi/qmp/qlist.h" #include "libqtest.h" +#include "libqos/fw_cfg.h" +#include "libqos/libqos.h" +#include "standard-headers/linux/qemu_fw_cfg.h"
#define ARGV_SIZE 256
@@ -388,6 +393,567 @@ static void test_ide_drive_cd_0(void) qtest_quit(qts); }
+typedef struct { + bool active; + uint32_t head; + uint32_t sector; + uint32_t cyl; + uint32_t end_head; + uint32_t end_sector; + uint32_t end_cyl; + uint32_t start_sect; + uint32_t nr_sects; +} MBRpartitions[4]; + +static MBRpartitions empty_mbr = { {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0}, + {false, 0, 0, 0, 0, 0, 0, 0, 0} }; + +static char *create_qcow2_with_mbr(MBRpartitions mbr, uint64_t sectors) +{ + const char *template = "/tmp/qtest.XXXXXX"; + char *raw_path = strdup(template); + char *qcow2_path = strdup(template); + char cmd[100 + 2 * PATH_MAX]; + uint8_t buf[512]; + int i, ret, fd, offset; + uint64_t qcow2_size = sectors * 512; + uint8_t status, parttype, head, sector, cyl; + char *qemu_img_path; + char *qemu_img_abs_path; + + offset = 0xbe; + + for (i = 0; i < 4; i++) { + status = mbr[i].active ? 0x80 : 0x00; + g_assert(mbr[i].head < 256); + g_assert(mbr[i].sector < 64); + g_assert(mbr[i].cyl < 1024); + head = mbr[i].head; + sector = mbr[i].sector + ((mbr[i].cyl & 0x300) >> 2); + cyl = mbr[i].cyl & 0xff; + + buf[offset + 0x0] = status; + buf[offset + 0x1] = head; + buf[offset + 0x2] = sector; + buf[offset + 0x3] = cyl; + + parttype = 0; + g_assert(mbr[i].end_head < 256); + g_assert(mbr[i].end_sector < 64); + g_assert(mbr[i].end_cyl < 1024); + head = mbr[i].end_head; + sector = mbr[i].end_sector + ((mbr[i].end_cyl & 0x300) >> 2); + cyl = mbr[i].end_cyl & 0xff; + + buf[offset + 0x4] = parttype; + buf[offset + 0x5] = head; + buf[offset + 0x6] = sector; + buf[offset + 0x7] = cyl; + + (*(uint32_t *)&buf[offset + 0x8]) = cpu_to_le32(mbr[i].start_sect); + (*(uint32_t *)&buf[offset + 0xc]) = cpu_to_le32(mbr[i].nr_sects); + + offset += 0x10; + } + + fd = mkstemp(raw_path); + g_assert(fd); + close(fd); + + fd = open(raw_path, O_WRONLY); + g_assert(fd >= 0); + ret = write(fd, buf, sizeof(buf)); + g_assert(ret == sizeof(buf)); + close(fd); + + fd = mkstemp(qcow2_path); + g_assert(fd); + close(fd); + + qemu_img_path = getenv("QTEST_QEMU_IMG"); + g_assert(qemu_img_path); + qemu_img_abs_path = realpath(qemu_img_path, NULL); + g_assert(qemu_img_abs_path); + + ret = snprintf(cmd, sizeof(cmd), + "%s convert -f raw -O qcow2 %s %s > /dev/null", + qemu_img_abs_path, + raw_path, qcow2_path); + g_assert((0 < ret) && (ret <= sizeof(cmd))); + ret = system(cmd); + g_assert(ret == 0); + + ret = snprintf(cmd, sizeof(cmd), + "%s resize %s %" PRIu64 " > /dev/null", + qemu_img_abs_path, + qcow2_path, qcow2_size); + g_assert((0 < ret) && (ret <= sizeof(cmd))); + ret = system(cmd); + g_assert(ret == 0); + + free(qemu_img_abs_path); + + unlink(raw_path); + free(raw_path); + + return qcow2_path; +} + +struct QemuCfgFile { + uint32_t size; /* file size */ + uint16_t select; /* write this to 0x510 to read it */ + uint16_t reserved; + char name[56]; +}; + +static uint16_t find_fw_cfg_file(QFWCFG *fw_cfg, + const char *filename) +{ + struct QemuCfgFile qfile; + uint32_t count, e; + uint16_t select; + + count = qfw_cfg_get_u32(fw_cfg, FW_CFG_FILE_DIR); + count = be32_to_cpu(count); + for (select = 0, e = 0; e < count; e++) { + qfw_cfg_read_data(fw_cfg, &qfile, sizeof(qfile)); + if (!strcmp(filename, qfile.name)) { + select = be16_to_cpu(qfile.select); + } + } + + return select; +} + +static void read_fw_cfg_file(QFWCFG *fw_cfg, + const char *filename, + void *data, + size_t len) +{ + uint16_t select = find_fw_cfg_file(fw_cfg, filename); + + g_assert(select); + + qfw_cfg_get(fw_cfg, select, data, len); +} + +#define BIOS_GEOMETRY_MAX_SIZE 10000 + +typedef struct { + uint32_t c; + uint32_t h; + uint32_t s; +} CHS; + +typedef struct { + const char *dev_path; + CHS chs; +} CHSResult; + +static void read_bootdevices(QFWCFG *fw_cfg, CHSResult expected[]) +{ + char *buf = g_malloc0(BIOS_GEOMETRY_MAX_SIZE); + char *cur; + GList *results = NULL, *cur_result; + CHSResult *r; + int i; + int res; + bool found; + + read_fw_cfg_file(fw_cfg, "bios-geometry", buf, BIOS_GEOMETRY_MAX_SIZE); + + for (cur = buf; *cur; cur++) { + if (*cur == '\n') { + *cur = '\0'; + } + } + cur = buf; + + while (strlen(cur)) { + + r = g_malloc0(sizeof(*r)); + r->dev_path = g_malloc0(strlen(cur) + 1); + res = sscanf(cur, "%s %" PRIu32 " %" PRIu32 " %" PRIu32, + (char *)r->dev_path, &(r->chs.c), &(r->chs.h), &(r->chs.s)); + + g_assert(res == 4); + + results = g_list_prepend(results, r); + + cur += strlen(cur) + 1; + } + + i = 0; + + while (expected[i].dev_path) { + found = false; + cur_result = results; + while (cur_result) { + r = cur_result->data; + if (!strcmp(r->dev_path, expected[i].dev_path) && + !memcmp(&(r->chs), &(expected[i].chs), sizeof(r->chs))) { + found = true; + break; + } + cur_result = g_list_next(cur_result); + } + g_assert(found); + g_free((char *)((CHSResult *)cur_result->data)->dev_path); + g_free(cur_result->data); + results = g_list_delete_link(results, cur_result); + i++; + } + + g_assert(results == NULL); + + g_free(buf); +} + +#define MAX_DRIVES 30 + +typedef struct { + char **argv; + int argc; + char **drives; + int n_drives; + int n_scsi_disks; + int n_scsi_controllers; + int n_virtio_disks; +} TestArgs; + +static TestArgs *create_args(void) +{ + TestArgs *args = g_malloc0(sizeof(*args)); + args->argv = g_new0(char *, ARGV_SIZE); + args->argc = append_arg(args->argc, args->argv, + ARGV_SIZE, g_strdup("-nodefaults")); + args->drives = g_new0(char *, MAX_DRIVES); + return args; +} + +static void add_drive_with_mbr(TestArgs *args, + MBRpartitions mbr, uint64_t sectors) +{ + char *img_file_name; + char part[300]; + int ret; + + g_assert(args->n_drives < MAX_DRIVES); + + img_file_name = create_qcow2_with_mbr(mbr, sectors); + + args->drives[args->n_drives] = img_file_name; + ret = snprintf(part, sizeof(part), + "-drive file=%s,if=none,format=qcow2,id=disk%d", + img_file_name, args->n_drives); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_drives++; +} + +static void add_ide_disk(TestArgs *args, + int drive_idx, int bus, int unit, int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device ide-hd,drive=disk%d,bus=ide.%d,unit=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + drive_idx, bus, unit, c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); +} + +static void add_scsi_controller(TestArgs *args, + const char *type, + const char *bus, + int addr) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device %s,id=scsi%d,bus=%s,addr=%d", + type, args->n_scsi_controllers, bus, addr); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_scsi_controllers++; +} + +static void add_scsi_disk(TestArgs *args, + int drive_idx, int bus, + int channel, int scsi_id, int lun, + int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device scsi-hd,id=scsi-disk%d,drive=disk%d," + "bus=scsi%d.0," + "channel=%d,scsi-id=%d,lun=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + args->n_scsi_disks, drive_idx, bus, channel, scsi_id, lun, + c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_scsi_disks++; +} + +static void add_virtio_disk(TestArgs *args, + int drive_idx, const char *bus, int addr, + int c, int h, int s) +{ + char part[300]; + int ret; + + ret = snprintf(part, sizeof(part), + "-device virtio-blk-pci,id=virtio-disk%d," + "drive=disk%d,bus=%s,addr=%d," + "lcyls=%d,lheads=%d,lsecs=%d", + args->n_virtio_disks, drive_idx, bus, addr, c, h, s); + g_assert((0 < ret) && (ret <= sizeof(part))); + args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part)); + args->n_virtio_disks++; +} + +static void test_override(TestArgs *args, CHSResult expected[]) +{ + char *joined_args; + QFWCFG *fw_cfg; + int i; + + joined_args = g_strjoinv(" ", args->argv); + + qtest_start(joined_args); + fw_cfg = pc_fw_cfg_init(global_qtest); + + read_bootdevices(fw_cfg, expected); + + g_free(joined_args); + qtest_end(); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + +static void test_override_ide(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/ide@1,1/drive@0/disk@0", {10000, 120, 30} }, + {"/pci@i0cf8/ide@1,1/drive@0/disk@1", {9000, 120, 30} }, + {"/pci@i0cf8/ide@1,1/drive@1/disk@0", {0, 1, 1} }, + {"/pci@i0cf8/ide@1,1/drive@1/disk@1", {1, 0, 0} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_ide_disk(args, 0, 0, 0, 10000, 120, 30); + add_ide_disk(args, 1, 0, 1, 9000, 120, 30); + add_ide_disk(args, 2, 1, 0, 0, 1, 1); + add_ide_disk(args, 3, 1, 1, 1, 0, 0); + test_override(args, expected); +} + +static void test_override_scsi(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", {9000, 120, 30} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@2,0", {1, 0, 0} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@3,0", {0, 1, 0} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "lsi53c895a", "pci.0", 3); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30); + add_scsi_disk(args, 2, 0, 0, 2, 0, 1, 0, 0); + add_scsi_disk(args, 3, 0, 0, 3, 0, 0, 1, 0); + test_override(args, expected); +} + +static void test_override_scsi_2_controllers(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", {9000, 120, 30} }, + {"/pci@i0cf8/scsi@4/channel@0/disk@0,1", {1, 0, 0} }, + {"/pci@i0cf8/scsi@4/channel@0/disk@1,2", {0, 1, 0} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "lsi53c895a", "pci.0", 3); + add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 4); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30); + add_scsi_disk(args, 2, 1, 0, 0, 1, 1, 0, 0); + add_scsi_disk(args, 3, 1, 0, 1, 2, 0, 1, 0); + test_override(args, expected); +} + +static void test_override_virtio_blk(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@3/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@4/disk@0,0", {9000, 120, 30} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_virtio_disk(args, 0, "pci.0", 3, 10000, 120, 30); + add_virtio_disk(args, 1, "pci.0", 4, 9000, 120, 30); + test_override(args, expected); +} + +static void test_override_zero_chs(void) +{ + TestArgs *args = create_args(); + CHSResult expected[] = { + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_ide_disk(args, 0, 1, 1, 0, 0, 0); + test_override(args, expected); +} + +static void test_override_scsi_hot_unplug(void) +{ + char *joined_args; + QFWCFG *fw_cfg; + QDict *response; + int i; + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@2/channel@0/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + CHSResult expected2[] = { + {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 2); + add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30); + add_scsi_disk(args, 1, 0, 0, 1, 0, 20, 20, 20); + + joined_args = g_strjoinv(" ", args->argv); + + qtest_start(joined_args); + fw_cfg = pc_fw_cfg_init(global_qtest); + + read_bootdevices(fw_cfg, expected); + + /* unplug device an restart */ + response = qmp("{ 'execute': 'device_del'," + " 'arguments': {'id': 'scsi-disk0' }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + response = qmp("{ 'execute': 'system_reset', 'arguments': { }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + + qtest_qmp_eventwait(global_qtest, "RESET"); + + read_bootdevices(fw_cfg, expected2); + + g_free(joined_args); + qtest_end(); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + +static void test_override_virtio_hot_unplug(void) +{ + char *joined_args; + QFWCFG *fw_cfg; + QDict *response; + int i; + TestArgs *args = create_args(); + CHSResult expected[] = { + {"/pci@i0cf8/scsi@2/disk@0,0", {10000, 120, 30} }, + {"/pci@i0cf8/scsi@3/disk@0,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + CHSResult expected2[] = { + {"/pci@i0cf8/scsi@3/disk@0,0", {20, 20, 20} }, + {NULL, {0, 0, 0} } + }; + add_drive_with_mbr(args, empty_mbr, 1); + add_drive_with_mbr(args, empty_mbr, 1); + add_virtio_disk(args, 0, "pci.0", 2, 10000, 120, 30); + add_virtio_disk(args, 1, "pci.0", 3, 20, 20, 20); + + joined_args = g_strjoinv(" ", args->argv); + + qtest_start(joined_args); + fw_cfg = pc_fw_cfg_init(global_qtest); + + read_bootdevices(fw_cfg, expected); + + /* unplug device an restart */ + response = qmp("{ 'execute': 'device_del'," + " 'arguments': {'id': 'virtio-disk0' }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + response = qmp("{ 'execute': 'system_reset', 'arguments': { }}"); + g_assert(response); + g_assert(!qdict_haskey(response, "error")); + qobject_unref(response); + + qtest_qmp_eventwait(global_qtest, "RESET"); + + read_bootdevices(fw_cfg, expected2); + + g_free(joined_args); + qtest_end(); + + g_free(fw_cfg); + + for (i = 0; i < args->n_drives; i++) { + unlink(args->drives[i]); + free(args->drives[i]); + } + g_free(args->drives); + g_strfreev(args->argv); + g_free(args); +} + int main(int argc, char **argv) { Backend i; @@ -413,6 +979,21 @@ int main(int argc, char **argv) qtest_add_func("hd-geo/ide/device/mbr/chs", test_ide_device_mbr_chs); qtest_add_func("hd-geo/ide/device/user/chs", test_ide_device_user_chs); qtest_add_func("hd-geo/ide/device/user/chst", test_ide_device_user_chst); + if (have_qemu_img()) { + qtest_add_func("hd-geo/override/ide", test_override_ide); + qtest_add_func("hd-geo/override/scsi", test_override_scsi); + qtest_add_func("hd-geo/override/scsi_2_controllers", + test_override_scsi_2_controllers); + qtest_add_func("hd-geo/override/virtio_blk", test_override_virtio_blk); + qtest_add_func("hd-geo/override/zero_chs", test_override_zero_chs); + qtest_add_func("hd-geo/override/scsi_hot_unplug", + test_override_scsi_hot_unplug); + qtest_add_func("hd-geo/override/virtio_hot_unplug", + test_override_virtio_hot_unplug); + } else { + g_test_message("QTEST_QEMU_IMG not set or qemu-img missing; " + "skipping hd-geo/override/* tests"); + }
ret = g_test_run();