v1:
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead.
In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization.
By supplying the logical geometies directly we are able to support such "exotic" disks.
We will use fw_cfg to do just that.
v2:
Rename bootdevices fw_cfg key to bios-geoemtry
Sam Eiderman (5): geometry: Read LCHS from fw_cfg boot: Reorder functions in boot.c geometry: Add boot_lchs_find_*() utility functions config: Add toggle for bootdevice information geometry: Apply LCHS values for boot devices
src/Kconfig | 7 ++ src/block.c | 21 ++++- src/block.h | 1 + src/boot.c | 244 +++++++++++++++++++++++++++++++++++++++++---------- src/hw/ahci.c | 1 + src/hw/ata.c | 8 ++ src/hw/esp-scsi.c | 2 + src/hw/lsi-scsi.c | 2 + src/hw/megasas.c | 1 + src/hw/mpt-scsi.c | 2 + src/hw/pvscsi.c | 1 + src/hw/virtio-blk.c | 2 + src/hw/virtio-scsi.c | 2 + src/util.h | 6 ++ 14 files changed, 254 insertions(+), 46 deletions(-)
Read bios geometry for boot devices from fw_cfg.
By receiving LCHS values directly from QEMU through fw_cfg we will be able to support logical geometries which can not be inferred by SeaBIOS itself. (For instance: A 8GB virtio-blk hard drive which was originally created as an IDE and must report LCHS of */32/63 for its operating system to function will always break under SeaBIOS since a LARGE/LBA translation will be used, causing the number of reported logical heads to be > 32.)
The only LCHS paravirtual interface available at the moment is for IDE disks (rtc_read() in get_translation()) and it's limited to a maximum of 4 disks (this code existed in SeaBIOS's translation function before SCSI and VirtIO were even introduced). This is why we create a new interface which allows passing LCHS information per hdd.
Boot device information is serialized in the following way: * device path (sz string) * device lchs ... * device path (sz string) * device lchs
Device path is a null terminated string in the "Open Firmware" device path format, the same path as used in bootorder.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- src/boot.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)
diff --git a/src/boot.c b/src/boot.c index 5acf94fe..b4382041 100644 --- a/src/boot.c +++ b/src/boot.c @@ -24,6 +24,84 @@
/**************************************************************** + * Boot device logical geometry + ****************************************************************/ + +typedef struct BootDeviceLCHSSerialized { + u32 lcyls; + u32 lheads; + u32 lsecs; +} PACKED BootDeviceLCHSSerialized; + +typedef struct BootDeviceLCHS { + char *name; + u32 lcyls; + u32 lheads; + u32 lsecs; +} BootDeviceLCHS; + +static BootDeviceLCHS *BiosGeometry VARVERIFY32INIT; +static int BiosGeometryCount; + +static void +loadBiosGeometry(void) +{ + BiosGeometryCount = 0; + int fsize; + char *f = romfile_loadfile("bios-geometry", &fsize); + if (!f) + return; + + u32 struct_size = sizeof(BootDeviceLCHSSerialized); + + int i; + int str_found = 0; + + for (i = 0; i < fsize; i++) { + if (f[i] != '\0') + str_found = 1; + else if (f[i] == '\0' && str_found) { + str_found = 0; + i++; + if (i + struct_size > fsize) + break; + i += struct_size - 1; + BiosGeometryCount++; + } else + break; + } + + BiosGeometry = malloc_tmphigh(BiosGeometryCount * sizeof(BootDeviceLCHS)); + if (!BiosGeometry) { + warn_noalloc(); + free(f); + BiosGeometryCount = 0; + return; + } + + dprintf(1, "bios geometry:\n"); + + BootDeviceLCHSSerialized *blk; + BootDeviceLCHS *d; + + for (i = 0; i < BiosGeometryCount; i++) { + d = &BiosGeometry[i]; + d->name = f; + f += strlen(f) + 1; + + blk = (BootDeviceLCHSSerialized *)f; + d->lcyls = blk->lcyls; + d->lheads = blk->lheads; + d->lsecs = blk->lsecs; + f += struct_size; + + dprintf(1, "%s: (%u, %u, %u)\n", + d->name, d->lcyls, d->lheads, d->lsecs); + } +} + + +/**************************************************************** * Boot priority ordering ****************************************************************/
@@ -288,6 +366,7 @@ boot_init(void) BootRetryTime = romfile_loadint("etc/boot-fail-wait", 60*1000);
loadBootOrder(); + loadBiosGeometry(); }
Currently glob_prefix() and build_pci_path() are under the "Boot priority ordering" section. Move them to a new "Helper search functions" section since we will reuse them in the next commit.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- src/boot.c | 94 ++++++++++++++++++++++++++++++++------------------------------ 1 file changed, 49 insertions(+), 45 deletions(-)
diff --git a/src/boot.c b/src/boot.c index b4382041..78d2c530 100644 --- a/src/boot.c +++ b/src/boot.c @@ -22,6 +22,55 @@ #include "util.h" // irqtimer_calc #include "tcgbios.h" // tpm_*
+/**************************************************************** + * Helper search functions + ****************************************************************/ + +// See if 'str' starts with 'glob' - if glob contains an '*' character +// it will match any number of characters in str that aren't a '/' or +// the next glob character. +static char * +glob_prefix(const char *glob, const char *str) +{ + for (;;) { + if (!*glob && (!*str || *str == '/')) + return (char*)str; + if (*glob == '*') { + if (!*str || *str == '/' || *str == glob[1]) + glob++; + else + str++; + continue; + } + if (*glob != *str) + return NULL; + glob++; + str++; + } +} + +#define FW_PCI_DOMAIN "/pci@i0cf8" + +static char * +build_pci_path(char *buf, int max, const char *devname, struct pci_device *pci) +{ + // Build the string path of a bdf - for example: /pci@i0cf8/isa@1,2 + char *p = buf; + if (pci->parent) { + p = build_pci_path(p, max, "pci-bridge", pci->parent); + } else { + p += snprintf(p, buf+max-p, "%s", FW_PCI_DOMAIN); + if (pci->rootbus) + p += snprintf(p, buf+max-p, ",%x", pci->rootbus); + } + + int dev = pci_bdf_to_dev(pci->bdf), fn = pci_bdf_to_fn(pci->bdf); + p += snprintf(p, buf+max-p, "/%s@%x", devname, dev); + if (fn) + p += snprintf(p, buf+max-p, ",%x", fn); + return p; +} +
/**************************************************************** * Boot device logical geometry @@ -146,29 +195,6 @@ loadBootOrder(void) } while (f); }
-// See if 'str' starts with 'glob' - if glob contains an '*' character -// it will match any number of characters in str that aren't a '/' or -// the next glob character. -static char * -glob_prefix(const char *glob, const char *str) -{ - for (;;) { - if (!*glob && (!*str || *str == '/')) - return (char*)str; - if (*glob == '*') { - if (!*str || *str == '/' || *str == glob[1]) - glob++; - else - str++; - continue; - } - if (*glob != *str) - return NULL; - glob++; - str++; - } -} - // Search the bootorder list for the given glob pattern. static int find_prio(const char *glob) @@ -181,28 +207,6 @@ find_prio(const char *glob) return -1; }
-#define FW_PCI_DOMAIN "/pci@i0cf8" - -static char * -build_pci_path(char *buf, int max, const char *devname, struct pci_device *pci) -{ - // Build the string path of a bdf - for example: /pci@i0cf8/isa@1,2 - char *p = buf; - if (pci->parent) { - p = build_pci_path(p, max, "pci-bridge", pci->parent); - } else { - p += snprintf(p, buf+max-p, "%s", FW_PCI_DOMAIN); - if (pci->rootbus) - p += snprintf(p, buf+max-p, ",%x", pci->rootbus); - } - - int dev = pci_bdf_to_dev(pci->bdf), fn = pci_bdf_to_fn(pci->bdf); - p += snprintf(p, buf+max-p, "/%s@%x", devname, dev); - if (fn) - p += snprintf(p, buf+max-p, ",%x", fn); - return p; -} - int bootprio_find_pci_device(struct pci_device *pci) { if (CONFIG_CSM)
Adding the following utility functions:
* boot_lchs_find_pci_device * boot_lchs_find_scsi_device * boot_lchs_find_ata_device
These will be used to apply LCHS values received through fw_cfg.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- src/boot.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/util.h | 6 ++++++ 2 files changed, 69 insertions(+)
diff --git a/src/boot.c b/src/boot.c index 78d2c530..8162cb74 100644 --- a/src/boot.c +++ b/src/boot.c @@ -149,6 +149,69 @@ loadBiosGeometry(void) } }
+// Search the bios-geometry list for the given glob pattern. +static BootDeviceLCHS * +boot_lchs_find(const char *glob) +{ + dprintf(1, "Searching bios-geometry for: %s\n", glob); + int i; + for (i = 0; i < BiosGeometryCount; i++) + if (glob_prefix(glob, BiosGeometry[i].name)) + return &BiosGeometry[i]; + return NULL; +} + +int boot_lchs_find_pci_device(struct pci_device *pci, struct chs_s *chs) +{ + char desc[256]; + build_pci_path(desc, sizeof(desc), "*", pci); + BootDeviceLCHS *b = boot_lchs_find(desc); + if (!b) + return -1; + chs->cylinder = (u16)b->lcyls; + chs->head = (u16)b->lheads; + chs->sector = (u16)b->lsecs; + return 0; +} + +int boot_lchs_find_scsi_device(struct pci_device *pci, int target, int lun, + struct chs_s *chs) +{ + if (!pci) + // support only pci machine for now + return -1; + // Find scsi drive - for example: /pci@i0cf8/scsi@5/channel@0/disk@1,0 + char desc[256], *p; + p = build_pci_path(desc, sizeof(desc), "*", pci); + snprintf(p, desc+sizeof(desc)-p, "/*@0/*@%x,%x", target, lun); + BootDeviceLCHS *b = boot_lchs_find(desc); + if (!b) + return -1; + chs->cylinder = (u16)b->lcyls; + chs->head = (u16)b->lheads; + chs->sector = (u16)b->lsecs; + return 0; +} + +int boot_lchs_find_ata_device(struct pci_device *pci, int chanid, int slave, + struct chs_s *chs) +{ + if (!pci) + // support only pci machine for now + return -1; + // Find ata drive - for example: /pci@i0cf8/ide@1,1/drive@1/disk@0 + char desc[256], *p; + p = build_pci_path(desc, sizeof(desc), "*", pci); + snprintf(p, desc+sizeof(desc)-p, "/drive@%x/disk@%x", chanid, slave); + BootDeviceLCHS *b = boot_lchs_find(desc); + if (!b) + return -1; + chs->cylinder = (u16)b->lcyls; + chs->head = (u16)b->lheads; + chs->sector = (u16)b->lsecs; + return 0; +} +
/**************************************************************** * Boot priority ordering diff --git a/src/util.h b/src/util.h index e2afc80c..b173fa88 100644 --- a/src/util.h +++ b/src/util.h @@ -38,6 +38,12 @@ struct usbdevice_s; int bootprio_find_usb(struct usbdevice_s *usbdev, int lun); int get_keystroke_full(int msec); int get_keystroke(int msec); +struct chs_s; +int boot_lchs_find_pci_device(struct pci_device *pci, struct chs_s *chs); +int boot_lchs_find_scsi_device(struct pci_device *pci, int target, int lun, + struct chs_s *chs); +int boot_lchs_find_ata_device(struct pci_device *pci, int chanid, int slave, + struct chs_s *chs);
// bootsplash.c void enable_vga_console(void);
Add the "BIOS_GEOMETRY" toggle to remove boot device information received through fw_cfg.
We will use this toggle in QEMU to reduce the size of the 128k SeaBIOS rom, which is only used in old compat versions, where this boot device information does not exist.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- src/Kconfig | 7 +++++++ src/boot.c | 8 ++++++++ 2 files changed, 15 insertions(+)
diff --git a/src/Kconfig b/src/Kconfig index 55a87cb7..0b4c1c0d 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -72,6 +72,13 @@ endchoice help Support controlling of the boot order via the fw_cfg/CBFS "bootorder" file. + config BIOS_GEOMETRY + depends on BOOT + bool "Boot device bios geometry override" + default y + help + Support overriding bios (logical) geometry of boot devices via the + fw_cfg/CBFS "bios-geometry" file.
config COREBOOT_FLASH depends on COREBOOT diff --git a/src/boot.c b/src/boot.c index 8162cb74..695bc189 100644 --- a/src/boot.c +++ b/src/boot.c @@ -95,6 +95,8 @@ static int BiosGeometryCount; static void loadBiosGeometry(void) { + if (!CONFIG_BIOS_GEOMETRY) + return; BiosGeometryCount = 0; int fsize; char *f = romfile_loadfile("bios-geometry", &fsize); @@ -163,6 +165,8 @@ boot_lchs_find(const char *glob)
int boot_lchs_find_pci_device(struct pci_device *pci, struct chs_s *chs) { + if (!CONFIG_BIOS_GEOMETRY) + return -1; char desc[256]; build_pci_path(desc, sizeof(desc), "*", pci); BootDeviceLCHS *b = boot_lchs_find(desc); @@ -177,6 +181,8 @@ int boot_lchs_find_pci_device(struct pci_device *pci, struct chs_s *chs) int boot_lchs_find_scsi_device(struct pci_device *pci, int target, int lun, struct chs_s *chs) { + if (!CONFIG_BIOS_GEOMETRY) + return -1; if (!pci) // support only pci machine for now return -1; @@ -196,6 +202,8 @@ int boot_lchs_find_scsi_device(struct pci_device *pci, int target, int lun, int boot_lchs_find_ata_device(struct pci_device *pci, int chanid, int slave, struct chs_s *chs) { + if (!CONFIG_BIOS_GEOMETRY) + return -1; if (!pci) // support only pci machine for now return -1;
Boot devices which use overriden LCHS values are:
* ata * ahci * scsi * esp * lsi * megasas * mpt * pvscsi * virtio * virtio-blk
We use these values in get_translation() and setup_translation() by introducing a new translation type: "TRANSLATION_MACHINE".
We treat this translation as TRANSLATION_NONE in fill_ata_edd(), although this does not really matter since now the translation between physical and logical geometry does not exist.
Reviewed-by: Karl Heubaum karl.heubaum@oracle.com Reviewed-by: Arbel Moshe arbel.moshe@oracle.com Signed-off-by: Sam Eiderman shmuel.eiderman@oracle.com --- src/block.c | 21 ++++++++++++++++++++- src/block.h | 1 + src/hw/ahci.c | 1 + src/hw/ata.c | 8 ++++++++ src/hw/esp-scsi.c | 2 ++ src/hw/lsi-scsi.c | 2 ++ src/hw/megasas.c | 1 + src/hw/mpt-scsi.c | 2 ++ src/hw/pvscsi.c | 1 + src/hw/virtio-blk.c | 2 ++ src/hw/virtio-scsi.c | 2 ++ 11 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/src/block.c b/src/block.c index f73ec18c..ca23a83a 100644 --- a/src/block.c +++ b/src/block.c @@ -69,9 +69,17 @@ int create_bounce_buf(void) * Disk geometry translation ****************************************************************/
+static int +overriden_lchs_supplied(struct drive_s *drive) +{ + return drive->lchs.cylinder || drive->lchs.head || drive->lchs.sector; +} + static u8 get_translation(struct drive_s *drive) { + if (overriden_lchs_supplied(drive)) + return TRANSLATION_MACHINE; u8 type = drive->type; if (CONFIG_QEMU && type == DTYPE_ATA) { // Emulators pass in the translation info via nvram. @@ -159,6 +167,16 @@ setup_translation(struct drive_s *drive) break; } break; + case TRANSLATION_MACHINE: + desc = "overriden"; + cylinders = drive->lchs.cylinder; + heads = drive->lchs.head; + if (heads > 255) + heads = 255; + spt = drive->lchs.sector; + if (spt > 63) + spt = 63; + break; } // clip to 1024 cylinders in lchs if (cylinders > 1024) @@ -423,7 +441,8 @@ fill_ata_edd(struct segoff_s edd, struct drive_s *drive_gf) u16 options = 0; if (GET_GLOBALFLAT(drive_gf->type) == DTYPE_ATA) { u8 translation = GET_GLOBALFLAT(drive_gf->translation); - if (translation != TRANSLATION_NONE) { + if ((translation != TRANSLATION_NONE) && + (translation != TRANSLATION_MACHINE)) { options |= 1<<3; // CHS translation if (translation == TRANSLATION_LBA) options |= 1<<9; diff --git a/src/block.h b/src/block.h index f64e8807..12f27eee 100644 --- a/src/block.h +++ b/src/block.h @@ -90,6 +90,7 @@ struct drive_s { #define TRANSLATION_LBA 1 #define TRANSLATION_LARGE 2 #define TRANSLATION_RECHS 3 +#define TRANSLATION_MACHINE 4
#define EXTTYPE_FLOPPY 0 #define EXTTYPE_HD 1 diff --git a/src/hw/ahci.c b/src/hw/ahci.c index 1746e7a1..97a072a1 100644 --- a/src/hw/ahci.c +++ b/src/hw/ahci.c @@ -593,6 +593,7 @@ static int ahci_port_setup(struct ahci_port_s *port) , ata_extract_version(buffer)); port->prio = bootprio_find_ata_device(ctrl->pci_tmp, pnr, 0); } + boot_lchs_find_ata_device(ctrl->pci_tmp, pnr, 0, &(port->drive.lchs)); return 0; }
diff --git a/src/hw/ata.c b/src/hw/ata.c index b6e073cf..f788ce71 100644 --- a/src/hw/ata.c +++ b/src/hw/ata.c @@ -755,6 +755,10 @@ init_drive_atapi(struct atadrive_s *dummy, u16 *buffer) int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp, adrive->chan_gf->chanid, adrive->slave); + boot_lchs_find_ata_device(adrive->chan_gf->pci_tmp, + adrive->chan_gf->chanid, + adrive->slave, + &(adrive->drive.lchs)); boot_add_cd(&adrive->drive, desc, prio); }
@@ -805,6 +809,10 @@ init_drive_ata(struct atadrive_s *dummy, u16 *buffer) int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp, adrive->chan_gf->chanid, adrive->slave); + boot_lchs_find_ata_device(adrive->chan_gf->pci_tmp, + adrive->chan_gf->chanid, + adrive->slave, + &(adrive->drive.lchs)); // Register with bcv system. boot_add_hd(&adrive->drive, desc, prio);
diff --git a/src/hw/esp-scsi.c b/src/hw/esp-scsi.c index ffd86d0f..cc25f227 100644 --- a/src/hw/esp-scsi.c +++ b/src/hw/esp-scsi.c @@ -181,6 +181,8 @@ esp_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv)
char *name = znprintf(MAXDESCSIZE, "esp %pP %d:%d", llun->pci, llun->target, llun->lun); + boot_lchs_find_scsi_device(llun->pci, llun->target, llun->lun, + &(llun->drive.lchs)); int prio = bootprio_find_scsi_device(llun->pci, llun->target, llun->lun); int ret = scsi_drive_setup(&llun->drive, name, prio); free(name); diff --git a/src/hw/lsi-scsi.c b/src/hw/lsi-scsi.c index d5fc3e45..cbaa2acd 100644 --- a/src/hw/lsi-scsi.c +++ b/src/hw/lsi-scsi.c @@ -158,6 +158,8 @@ lsi_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) lsi_scsi_init_lun(llun, tmpl_llun->pci, tmpl_llun->iobase, tmpl_llun->target, lun);
+ boot_lchs_find_scsi_device(llun->pci, llun->target, llun->lun, + &(llun->drive.lchs)); char *name = znprintf(MAXDESCSIZE, "lsi %pP %d:%d", llun->pci, llun->target, llun->lun); int prio = bootprio_find_scsi_device(llun->pci, llun->target, llun->lun); diff --git a/src/hw/megasas.c b/src/hw/megasas.c index d2675804..87b8beec 100644 --- a/src/hw/megasas.c +++ b/src/hw/megasas.c @@ -225,6 +225,7 @@ megasas_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun) free(mlun); return -1; } + boot_lchs_find_scsi_device(pci, target, lun, &(mlun->drive.lchs)); name = znprintf(MAXDESCSIZE, "MegaRAID SAS (PCI %pP) LD %d:%d" , pci, target, lun); prio = bootprio_find_scsi_device(pci, target, lun); diff --git a/src/hw/mpt-scsi.c b/src/hw/mpt-scsi.c index 1faede6a..570b2126 100644 --- a/src/hw/mpt-scsi.c +++ b/src/hw/mpt-scsi.c @@ -221,6 +221,8 @@ mpt_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) mpt_scsi_init_lun(llun, tmpl_llun->pci, tmpl_llun->iobase, tmpl_llun->target, lun);
+ boot_lchs_find_scsi_device(llun->pci, llun->target, llun->lun, + &(llun->drive.lchs)); char *name = znprintf(MAXDESCSIZE, "mpt %pP %d:%d", llun->pci, llun->target, llun->lun); int prio = bootprio_find_scsi_device(llun->pci, llun->target, llun->lun); diff --git a/src/hw/pvscsi.c b/src/hw/pvscsi.c index 9d7d68d8..3e5171ad 100644 --- a/src/hw/pvscsi.c +++ b/src/hw/pvscsi.c @@ -273,6 +273,7 @@ pvscsi_add_lun(struct pci_device *pci, void *iobase, plun->iobase = iobase; plun->ring_dsc = ring_dsc;
+ boot_lchs_find_scsi_device(pci, target, lun, &(plun->drive.lchs)); char *name = znprintf(MAXDESCSIZE, "pvscsi %pP %d:%d", pci, target, lun); int prio = bootprio_find_scsi_device(pci, target, lun); int ret = scsi_drive_setup(&plun->drive, name, prio); diff --git a/src/hw/virtio-blk.c b/src/hw/virtio-blk.c index 88d7e54a..3e615b26 100644 --- a/src/hw/virtio-blk.c +++ b/src/hw/virtio-blk.c @@ -183,6 +183,8 @@ init_virtio_blk(void *data)
status |= VIRTIO_CONFIG_S_DRIVER_OK; vp_set_status(&vdrive->vp, status); + + boot_lchs_find_pci_device(pci, &vdrive->drive.lchs); return;
fail: diff --git a/src/hw/virtio-scsi.c b/src/hw/virtio-scsi.c index a87cad88..e1e2f5d4 100644 --- a/src/hw/virtio-scsi.c +++ b/src/hw/virtio-scsi.c @@ -121,6 +121,8 @@ virtio_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) virtio_scsi_init_lun(vlun, tmpl_vlun->pci, tmpl_vlun->vp, tmpl_vlun->vq, tmpl_vlun->target, lun);
+ boot_lchs_find_scsi_device(vlun->pci, vlun->target, vlun->lun, + &(vlun->drive.lchs)); int prio = bootprio_find_scsi_device(vlun->pci, vlun->target, vlun->lun); int ret = scsi_drive_setup(&vlun->drive, "virtio-scsi", prio); if (ret)
-
Sam Eiderman