Re: [SeaBIOS] GeodeVGA global variable access

[Christian Gmeiner]

everything works - feel free to commit :)

Will rework my patches (VESA support and Flat Panel Support) and hope
to send them during this
week. Finally I will look into EDID.
---
Christian Gmeiner, MSc

2012/9/16 Christian Gmeiner :
> looks... fine... will comile it tomorrow in the office
>
> Christian Gmeiner, MSc
>
> 2012/9/16 Kevin O'Connor :
> > Hi Christian,
> >
> > I just noticed that a recent Geode patch introduced global variables
> > that are accessed without GET_GLOBAL/SET_VGA macros.  This will cause
> > random memory corruption.  Please see the patch below.
> >
> > -Kevin
> >
> > From ef7f73fa23e42953932920d39f729df82605b2a8 Mon Sep 17 00:00:00 2001
> > From: Kevin O'Connor 
> > Date: Sun, 16 Sep 2012 13:24:30 -0400
> > Subject: [PATCH] geodevga: Access global variables using GET_GLOBAL/SET_VGA
> >  macros.
> > To: [e-mail]
> >
> > The vgabios runs in 16bit mode so all global variables must be
> > accessed via macros.
> > Signed-off-by: Kevin O'Connor
> >
> > vgasrc/geodevga.c | 76 ++++++++++++++++++++++++++++---------------------------
> >  1 file changed, 39 insertions(+), 37 deletions(-)
> >
> > diff --git a/vgasrc/geodevga.c b/vgasrc/geodevga.c
> > index ed41be6..cf1382d 100644
> > --- a/vgasrc/geodevga.c
> > +++ b/vgasrc/geodevga.c
> > @@ -86,55 +86,58 @@ static void geode_mem_mask(u32 addr, u32 off, u32 or)
> >      );
> >  }
> >
> > -/****************************************************************
> > Helper functions
> > ****************************************************************/
> >
> > -struct geode {
> > u32 fb;
> > u32 dc;
> > u32 vp;
> >
> > -};
> > -struct geode geode VAR16;
> > +static u32 GeodeFB VAR16;
> > +static u32 GeodeDC VAR16;
> > +static u32 GeodeVP VAR16;
> >
> > static u32 geode_dc_read(int reg)
> >  {
> > u32 val = geode_mem_read(geode.dc + reg);
> > dprintf(4, "%s(0x%08x) = 0x%08x\n", __func__, geode.dc + reg, val);
> > u32 val = geode_mem_read(GET_GLOBAL(GeodeDC) + reg);
> > dprintf(4, "%s(0x%08x) = 0x%08x\n"
> >        , __func__, GET_GLOBAL(GeodeDC) + reg, val);
> > return val;
> >
> > }
> >
> > static void geode_dc_write(int reg, u32 val)
> >  {
> > dprintf(4, "%s(0x%08x, 0x%08x)\n", __func__, geode.dc + reg, val);
> > geode_mem_mask(geode.dc + reg, ~0, val);
> > dprintf(4, "%s(0x%08x, 0x%08x)\n"
> >        , __func__, GET_GLOBAL(GeodeDC) + reg, val);
> > geode_mem_mask(GET_GLOBAL(GeodeDC) + reg, ~0, val);
> >
> > }
> >
> > static void geode_dc_mask(int reg, u32 off, u32 on)
> >  {
> > dprintf(4, "%s(0x%08x, 0x%08x, 0x%08x)\n", __func__, geode.dc + reg, off, on);
> > geode_mem_mask(geode.dc + reg, off, on);
> > dprintf(4, "%s(0x%08x, 0x%08x, 0x%08x)\n"
> >        , __func__, GET_GLOBAL(GeodeDC) + reg, off, on);
> > geode_mem_mask(GET_GLOBAL(GeodeDC) + reg, off, on);
> >
> > }
> >
> > static u32 geode_vp_read(int reg)
> >  {
> > u32 val = geode_mem_read(geode.vp + reg);
> > dprintf(4, "%s(0x%08x) = 0x%08x\n", __func__, geode.vp + reg, val);
> > u32 val = geode_mem_read(GET_GLOBAL(GeodeVP) + reg);
> > dprintf(4, "%s(0x%08x) = 0x%08x\n"
> >        , __func__, GET_GLOBAL(GeodeVP) + reg, val);
> > return val;
> >
> > }
> >
> > static void geode_vp_write(int reg, u32 val)
> >  {
> > dprintf(4, "%s(0x%08x, 0x%08x)\n", __func__, geode.vp + reg, val);
> > geode_mem_mask(geode.vp + reg, ~0, val);
> > dprintf(4, "%s(0x%08x, 0x%08x)\n"
> >        , __func__, GET_GLOBAL(GeodeVP) + reg, val);
> > geode_mem_mask(GET_GLOBAL(GeodeVP) + reg, ~0, val);
> >
> > }
> >
> > static void geode_vp_mask(int reg, u32 off, u32 on)
> >  {
> > dprintf(4, "%s(0x%08x, 0x%08x, 0x%08x)\n", __func__, geode.vp + reg, off, on);
> > geode_mem_mask(geode.vp + reg, off, on);
> > dprintf(4, "%s(0x%08x, 0x%08x, 0x%08x)\n"
> >        , __func__, GET_GLOBAL(GeodeVP) + reg, off, on);
> > geode_mem_mask(GET_GLOBAL(GeodeVP) + reg, off, on);
> >
> > }
> >
> > +/****************************************************************
> > Helper functions
> > ****************************************************************/
> >
> > static int legacyio_check(void)
> >  {
> >      int ret=0;
> > @@ -199,10 +202,9 @@ static void dc_setup(void)
> >      geode_dc_write(DC_CURS_ST_OFFSET, 0x0);
> >  /* read fb-bar from pci, then point dc to the fb base */
> > u32 dc_fb = geode_dc_read(DC_GLIU0_MEM_OFFSET);
> > if (geode.fb != dc_fb) {
> >    geode_dc_write(DC_GLIU0_MEM_OFFSET, geode.fb);
> > }
> >
> > u32 fb = GET_GLOBAL(GeodeFB);
> >
> > if (geode_dc_read(DC_GLIU0_MEM_OFFSET) != fb)
> >    geode_dc_write(DC_GLIU0_MEM_OFFSET, fb);
> >
> > geode_dc_mask(DC_DISPLAY_CFG, ~DC_CFG_MSK, DC_GDEN|DC_TRUP);
> >    geode_dc_write(DC_GENERAL_CFG, DC_VGAE);
> >
> > @@ -210,10 +212,10 @@ static void dc_setup(void)
> >      geode_dc_write(DC_UNLOCK, DC_LOCK_LOCK);
> >  u32 fb_size = framebuffer_size(); // in byte
> > dprintf(1, "%d KB of video memory at 0x%08x\n", fb_size / 1024, geode.fb);
> >
> > dprintf(1, "%d KB of video memory at 0x%08x\n", fb_size / 1024, fb);
> >
> > /* update VBE variables */
> > SET_VGA(VBE_framebuffer, geode.fb);
> > SET_VGA(VBE_framebuffer, fb);
> > SET_VGA(VBE_total_memory, fb_size / 1024 / 64); // number of 64K blocks
> >
> > }
> >
> > @@ -335,16 +337,16 @@ int geodevga_init(void)
> >      if (GET_GLOBAL(VgaBDF) < 0)
> >          // Device should be at 00:01.1
> >          SET_VGA(VgaBDF, pci_to_bdf(0, 1, 1));
> > // setup geode struct which is used for register access
> > geode.fb = pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_0);
> > geode.dc = pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_2);
> > geode.vp = pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_3);
> > dprintf(1, "fb addr: 0x%08x\n", geode.fb);
> > dprintf(1, "dc addr: 0x%08x\n", geode.dc);
> > dprintf(1, "vp addr: 0x%08x\n", geode.vp);
> > SET_VGA(GeodeFB, pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_0));
> > SET_VGA(GeodeDC, pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_2));
> > SET_VGA(GeodeVP, pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_3));
> > dprintf(1, "fb addr: 0x%08x\n", GET_GLOBAL(GeodeFB));
> > dprintf(1, "dc addr: 0x%08x\n", GET_GLOBAL(GeodeDC));
> > dprintf(1, "vp addr: 0x%08x\n", GET_GLOBAL(GeodeVP));
> > vp_setup();
> >    dc_setup();