Re: [SeaBIOS] [RFC PATCH 9/9] enable memory devices if e820 entry is present

[Wen Congyang]

At 04/19/2012 10:08 PM, Vasilis Liaskovitis Wrote:
> On a reboot, seabios regenerates srat/ssdt objects. If a valid e820 entry is
>  found spanning the whole address range of a hotplug memory device, the  device
>  will be enabled. This ensures persistency of hotplugged memory slots across VM
>  reboots.
> Signed-off-by: Vasilis Liaskovitis
>
> src/acpi.c   |    6 +++++-
>  src/memmap.c |   15 +++++++++++++++
>  2 files changed, 20 insertions(+), 1 deletions(-)
>
> diff --git a/src/acpi.c b/src/acpi.c
> index 5580099..2ebed2e 100644
> --- a/src/acpi.c
> +++ b/src/acpi.c
> @@ -601,7 +601,11 @@ build_memssdt(void)
>      for (i = 0; i < nb_memdevs; i++) {
>          mem_base = (((u64)(entry->base_addr_high) << 32 )| entry->base_addr_low);
>          mem_len = (((u64)(entry->length_high) << 32 )| entry->length_low);
>    *(ssdt_ptr++) = 0x00;
>    if (find_e820(mem_base, mem_len, E820_RAM)) {

This line will break the building:
Compilation complete. 0 Errors, 16 Warnings, 0 Remarks, 259 Optimizations
  Compiling whole program out/ccode32flat.o
src/acpi.c: In function ‘build_memssdt’:
src/acpi.c:604: warning: implicit declaration of function ‘find_e820’
src/memmap.c:137: note: previous definition of ‘find_e820’ was here
src/acpi.c:604: error: ‘E820_RAM’ undeclared (first use in this function)
src/acpi.c:604: error: (Each undeclared identifier is reported only once
src/acpi.c:604: error: for each function it appears in.)
make: *** [out/ccode32flat.o] Error 1

You should declare the function find_e820() in src/memmap.h and include
this header file in src/acpi.c.

Thanks
Wen Congyang
>        *(ssdt_ptr++) = 0x01;
>    }
>    else
>        *(ssdt_ptr++) = 0x00;
>    entry++;
> }
>    build_header((void*)ssdt, SSDT_SIGNATURE, ssdt_ptr - ssdt, 1);
>
> diff --git a/src/memmap.c b/src/memmap.c
> index 56865b4..9790da1 100644
> --- a/src/memmap.c
> +++ b/src/memmap.c
> @@ -131,6 +131,21 @@ add_e820(u64 start, u64 size, u32 type)
>      //dump_map();
>  }
>
> +// Check if an e820 entry exists that covers the memory range
> +// [start, start+size) with same type as type.
> +int
> +find_e820(u64 start, u64 size, u32 type)
> +{
> int i;
> for (i=0; i<e820_count; i++) {
>    struct e820entry *e = &e820_list[i];
>    if ((e->start <= start) && (e->size >= (size + start - e->start)) &&
>        (e->type == type))
>        return 1;
> }
> return 0;
>
> +}
>
> // Report on final memory locations.
>  void
>  memmap_finalize(void)