SeaBIOS

seabios@seabios.org

2 participants
3799 discussions

[PATCH 0/7] abstract chipset(i440fx) specific register operation.
by Isaku Yamahata 13 Jul '10

13 Jul '10

This patch set abstract out chipset specific operation, and spit out i440fx specific operation into dev-i440fx.c with it. Thus q35 specific register value/operation will be added easily. Isaku Yamahata (7): seabios: pci: introduce helper function to find device from table and initialize it. seabios: shadow: make device finding more generic. seabios: smm: move out piix4 specific logic to dev-i440fx.c seabios: smm_init: move out i440fx smram operation into dev-i440fx.c seabios: acpi: move acpi definitions to acpi.h from acpi.c seabios: acpi: split out piix4 pm logic. seabios: acpi: clean up of finding pm device. src/acpi.c | 102 +++++++++-------------------------------------------- src/acpi.h | 81 ++++++++++++++++++++++++++++++++++++++++++ src/dev-i440fx.c | 57 ++++++++++++++++++++++++++++++ src/dev-i440fx.h | 4 ++ src/pci.c | 12 ++++++ src/pci.h | 1 + src/post.h | 24 +++++++++++++ src/shadow.c | 44 +++++++++++++++-------- src/smm.c | 35 +++++++++++++----- 9 files changed, 251 insertions(+), 109 deletions(-) create mode 100644 src/post.h

2 9

Re: [SeaBIOS] [PATCH 6/7] seabios: acpi: split out piix4 pm logic.
by Kevin O'Connor 13 Jul '10

13 Jul '10

On Mon, Jul 12, 2010 at 08:47:51PM +0900, Isaku Yamahata wrote: > split out piix4 pm logic. [...] > @@ -202,11 +203,6 @@ static inline u16 cpu_to_le16(u16 x) > return x; > } > > -static inline u32 cpu_to_le32(u32 x) > -{ > - return x; > -} This is a nitpick, but if cpu_to_le32() is moved to a header then cpu_to_le16() needs to be moved to. It should also be moved to where ntohl() is defined (util.h). -Kevin

1 0

Re: [SeaBIOS] Alt SeaBIOS SSDT cpu hotplug
by Kevin O'Connor 11 Jul '10

11 Jul '10

On Sat, Jul 10, 2010 at 12:41:18AM +0800, Liu, Jinsong wrote: > Kevin O'Connor wrote: > > I've tested this under linux - there were a few bugs in the previous > > patch. I also had to replace the dynamically created CPUS array with > > a dynamically created NTFY method - which is a bit more complicated. [...] > Yeah, thanks Kevin. > After you done patch and draft test, our QA may do nightly test. Thanks. I've tested it with a Fedora Core 13 guest using kvm. Basic add cpu and eject cpu appears to work. I'll wait to hear back on further testing, and for any other comments. -Kevin

1 0

Re: [SeaBIOS] [PATCH v2 2/2] seabios: pciinit: use pci device initializer helper function.
by Kevin O'Connor 11 Jul '10

11 Jul '10

On Wed, Jul 07, 2010 at 12:14:02PM +0900, Isaku Yamahata wrote: > This patch makes use of pci device initialization helper function > to convert if/switch clause to table driven. > So this makes it easier to add q35 initialization code. > > Signed-off-by: Isaku Yamahata <yamahata(a)valinux.co.jp> I committed the first patch. I committed the second patch after fixing up the compile on it. You're likely seeing " Working around non-functional -combine" printed during the build. When in this mode the build textually includes all the .c files in order to still take advantage of the -fwhole-program optimization. Unfortunately in this mode, improper includes can slip through. You might want to try grabbing a newer version of gcc. I believe both the latest gcc v4.4 and gcc v4.5 work correctly. -Kevin

2 1

[PATCH] smbios: Allow all fields to be set via qemu_cfg_smbios_load_field()
by Alex Williamson 10 Jul '10

10 Jul '10

The protocol we use between qemu and seabios already allows any field to be specified (via smbios_add_field() in qemu). This patch makes seabios look for qemu specified values for nearly every field we set in the types 0,1,3,4,16,17,32 smbios tables. No change in current default values for any fields. Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> --- src/smbios.c | 222 +++++++++++++++++++++++++++++++++++++--------------------- 1 files changed, 141 insertions(+), 81 deletions(-) diff --git a/src/smbios.c b/src/smbios.c index e19a62d..917428a 100644 --- a/src/smbios.c +++ b/src/smbios.c @@ -61,7 +61,7 @@ smbios_entry_point_init(u16 max_structure_size, p->field = ++str_index; \ } while (0) -#define load_str_field_or_skip(type, field) \ +#define load_str_field_or_skip(type, field) \ do { \ size = qemu_cfg_smbios_load_field(type, \ offsetof(struct smbios_type_##type, \ @@ -74,6 +74,15 @@ smbios_entry_point_init(u16 max_structure_size, } \ } while (0) +#define set_field_with_default(type, field, def) \ + do { \ + if (!qemu_cfg_smbios_load_field(type, \ + offsetof(struct smbios_type_##type, \ + field), &p->field)) { \ + p->field = def; \ + } \ + } while (0) + /* Type 0 -- BIOS Information */ #define RELEASE_DATE_STR "01/01/2007" static void * @@ -97,24 +106,26 @@ smbios_init_type_0(void *start) p->bios_rom_size = 0; /* FIXME */ - memset(p->bios_characteristics, 0, 8); - p->bios_characteristics[0] = 0x08; /* BIOS characteristics not supported */ - p->bios_characteristics_extension_bytes[0] = 0; - /* Enable targeted content distribution. Needed for SVVP */ - p->bios_characteristics_extension_bytes[1] = 4; - if (!qemu_cfg_smbios_load_field(0, offsetof(struct smbios_type_0, - system_bios_major_release), - &p->system_bios_major_release)) - p->system_bios_major_release = 1; + bios_characteristics), + &p->bios_characteristics)) { + memset(p->bios_characteristics, 0, 8); + /* BIOS characteristics not supported */ + p->bios_characteristics[0] = 0x08; + } if (!qemu_cfg_smbios_load_field(0, offsetof(struct smbios_type_0, - system_bios_minor_release), - &p->system_bios_minor_release)) - p->system_bios_minor_release = 0; + bios_characteristics_extension_bytes), + &p->bios_characteristics_extension_bytes)) { + p->bios_characteristics_extension_bytes[0] = 0; + /* Enable targeted content distribution. Needed for SVVP */ + p->bios_characteristics_extension_bytes[1] = 4; + } - p->embedded_controller_major_release = 0xff; - p->embedded_controller_minor_release = 0xff; + set_field_with_default(0, system_bios_major_release, 1); + set_field_with_default(0, system_bios_minor_release, 0); + set_field_with_default(0, embedded_controller_major_release, 0xff); + set_field_with_default(0, embedded_controller_minor_release, 0xff); *end = 0; end++; @@ -140,12 +151,12 @@ smbios_init_type_1(void *start) load_str_field_or_skip(1, version_str); load_str_field_or_skip(1, serial_number_str); - size = qemu_cfg_smbios_load_field(1, offsetof(struct smbios_type_1, - uuid), &p->uuid); - if (size == 0) + if (!qemu_cfg_smbios_load_field(1, offsetof(struct smbios_type_1, + uuid), &p->uuid)) { memset(p->uuid, 0, 16); + } - p->wake_up_type = 0x06; /* power switch */ + set_field_with_default(1, wake_up_type, 0x06); /* power switch */ load_str_field_or_skip(1, sku_number_str); load_str_field_or_skip(1, family_str); @@ -165,29 +176,39 @@ static void * smbios_init_type_3(void *start) { struct smbios_type_3 *p = (struct smbios_type_3 *)start; + char *end = (char *)start + sizeof(struct smbios_type_3); + size_t size; + int str_index = 0; p->header.type = 3; p->header.length = sizeof(struct smbios_type_3); p->header.handle = 0x300; - p->manufacturer_str = 1; - p->type = 0x01; /* other */ - p->version_str = 0; - p->serial_number_str = 0; - p->asset_tag_number_str = 0; - p->boot_up_state = 0x03; /* safe */ - p->power_supply_state = 0x03; /* safe */ - p->thermal_state = 0x03; /* safe */ - p->security_status = 0x02; /* unknown */ - p->oem_defined = 0; - p->height = 0; - p->number_of_power_cords = 0; - p->contained_element_count = 0; - - start += sizeof(struct smbios_type_3); - memcpy((char *)start, CONFIG_APPNAME"\0\0", sizeof(CONFIG_APPNAME) + 1); - - return start + sizeof(CONFIG_APPNAME) + 1; + load_str_field_with_default(3, manufacturer_str, CONFIG_APPNAME); + set_field_with_default(3, type, 0x01); /* other */ + + load_str_field_or_skip(3, version_str); + load_str_field_or_skip(3, serial_number_str); + load_str_field_or_skip(3, asset_tag_number_str); + + set_field_with_default(3, boot_up_state, 0x03); /* safe */ + set_field_with_default(3, power_supply_state, 0x03); /* safe */ + set_field_with_default(3, thermal_state, 0x03); /* safe */ + set_field_with_default(3, security_status, 0x02); /* unknown */ + + set_field_with_default(3, oem_defined, 0); + set_field_with_default(3, height, 0); + set_field_with_default(3, number_of_power_cords, 0); + set_field_with_default(3, contained_element_count, 0); + + *end = 0; + end++; + if (!str_index) { + *end = 0; + end++; + } + + return end; } /* Type 4 -- Processor Information */ @@ -195,42 +216,63 @@ static void * smbios_init_type_4(void *start, unsigned int cpu_number) { struct smbios_type_4 *p = (struct smbios_type_4 *)start; + char *end = (char *)start + sizeof(struct smbios_type_4); + size_t size; + int str_index = 0; + char name[1024]; p->header.type = 4; p->header.length = sizeof(struct smbios_type_4); p->header.handle = 0x400 + cpu_number; - p->socket_designation_str = 1; - p->processor_type = 0x03; /* CPU */ - p->processor_family = 0x01; /* other */ - p->processor_manufacturer_str = 2; - - u32 cpuid_signature, ebx, ecx, cpuid_features; - cpuid(1, &cpuid_signature, &ebx, &ecx, &cpuid_features); - p->processor_id[0] = cpuid_signature; - p->processor_id[1] = cpuid_features; - - p->processor_version_str = 0; - p->voltage = 0; - p->external_clock = 0; + size = qemu_cfg_smbios_load_field(4, offsetof(struct smbios_type_4, + socket_designation_str), + name); + if (size) + snprintf(name + size - 1, sizeof(name) - size, "%2x", cpu_number); + else + snprintf(name, sizeof(name), "CPU%2x", cpu_number); + + memcpy(end, name, strlen(name) + 1); + end += strlen(name) + 1; + p->socket_designation_str = ++str_index; + + set_field_with_default(4, processor_type, 0x03); /* CPU */ + set_field_with_default(4, processor_family, 0x01); /* other */ + + load_str_field_with_default(4, processor_manufacturer_str, CONFIG_APPNAME); + + if (!qemu_cfg_smbios_load_field(4, offsetof(struct smbios_type_4, + processor_id), p->processor_id)) { + u32 cpuid_signature, ebx, ecx, cpuid_features; + cpuid(1, &cpuid_signature, &ebx, &ecx, &cpuid_features); + p->processor_id[0] = cpuid_signature; + p->processor_id[1] = cpuid_features; + } - p->max_speed = 2000; - p->current_speed = 2000; + load_str_field_or_skip(4, processor_version_str); + set_field_with_default(4, voltage, 0); + set_field_with_default(4, external_clock, 0); - p->status = 0x41; /* socket populated, CPU enabled */ - p->processor_upgrade = 0x01; /* other */ + set_field_with_default(4, max_speed, 2000); + set_field_with_default(4, current_speed, 2000); - p->l1_cache_handle = 0xffff; /* cache information structure not provided */ - p->l2_cache_handle = 0xffff; - p->l3_cache_handle = 0xffff; + set_field_with_default(4, status, 0x41); /* socket populated, CPU enabled */ + set_field_with_default(4, processor_upgrade, 0x01); /* other */ - start += sizeof(struct smbios_type_4); + /* cache information structure not provided */ + p->l1_cache_handle = 0xffff; + p->l2_cache_handle = 0xffff; + p->l3_cache_handle = 0xffff; - snprintf((char*)start, 6, "CPU%2x", cpu_number); - start += 6; - memcpy((char *)start, CONFIG_APPNAME"\0\0", sizeof(CONFIG_APPNAME) + 1); + *end = 0; + end++; + if (!str_index) { + *end = 0; + end++; + } - return start + sizeof(CONFIG_APPNAME) + 1; + return end; } /* Type 16 -- Physical Memory Array */ @@ -243,9 +285,10 @@ smbios_init_type_16(void *start, u32 memory_size_mb, int nr_mem_devs) p->header.length = sizeof(struct smbios_type_16); p->header.handle = 0x1000; - p->location = 0x01; /* other */ - p->use = 0x03; /* system memory */ - p->error_correction = 0x06; /* Multi-bit ECC to make Microsoft happy */ + set_field_with_default(16, location, 0x01); /* other */ + set_field_with_default(16, use, 0x03); /* system memory */ + /* Multi-bit ECC to make Microsoft happy */ + set_field_with_default(16, error_correction, 0x06); /* 0x80000000 = unknown, accept sizes < 2TB - TODO multiple arrays */ p->maximum_capacity = memory_size_mb < 2 << 20 ? memory_size_mb << 10 : 0x80000000; @@ -263,30 +306,47 @@ static void * smbios_init_type_17(void *start, u32 size_mb, int instance) { struct smbios_type_17 *p = (struct smbios_type_17 *)start; + char *end = (char *)start + sizeof(struct smbios_type_17); + size_t size; + int str_index = 0; + char name[1024]; p->header.type = 17; p->header.length = sizeof(struct smbios_type_17); p->header.handle = 0x1100 + instance; p->physical_memory_array_handle = 0x1000; - p->total_width = 64; - p->data_width = 64; + set_field_with_default(17, total_width, 64); + set_field_with_default(17, data_width, 64); /* TODO: should assert in case something is wrong ASSERT((memory_size_mb & ~0x7fff) == 0); */ p->size = size_mb; - p->form_factor = 0x09; /* DIMM */ + set_field_with_default(17, form_factor, 0x09); /* DIMM */ p->device_set = 0; - p->device_locator_str = 1; - p->bank_locator_str = 0; - p->memory_type = 0x07; /* RAM */ - p->type_detail = 0; - - start += sizeof(struct smbios_type_17); - memcpy((char *)start, "DIMM 0", 7); - ((char*)start)[5] += instance; - start += 7; - *((u8 *)start) = 0; - - return start+1; + + size = qemu_cfg_smbios_load_field(17, offsetof(struct smbios_type_17, + device_locator_str), + name); + if (size) + snprintf(name + size - 1, sizeof(name) - size, "%d", instance); + else + snprintf(name, sizeof(name), "DIMM %d", instance); + + memcpy(end, name, strlen(name) + 1); + end += strlen(name) + 1; + p->device_locator_str = ++str_index; + + load_str_field_or_skip(17, bank_locator_str); + set_field_with_default(17, memory_type, 0x07); /* RAM */ + set_field_with_default(17, type_detail, 0); + + *end = 0; + end++; + if (!str_index) { + *end = 0; + end++; + } + + return end; } /* Type 19 -- Memory Array Mapped Address */ @@ -345,7 +405,7 @@ smbios_init_type_32(void *start) p->header.length = sizeof(struct smbios_type_32); p->header.handle = 0x2000; memset(p->reserved, 0, 6); - p->boot_status = 0; /* no errors detected */ + set_field_with_default(32, boot_status, 0); /* no errors detected */ start += sizeof(struct smbios_type_32); *((u16 *)start) = 0;

2 6

Re: [SeaBIOS] Alt SeaBIOS SSDT cpu hotplug
by Kevin O'Connor 09 Jul '10

09 Jul '10

On Thu, Jul 08, 2010 at 09:19:13PM +0800, Liu, Jinsong wrote: > Avi Kivity wrote: > > Very nice. I thought about doing this but abandoned it as > > unmaintainable. Using external functions and the ID variable, > > however, reduces the mess to tolerable proportions, and gains us a > > lot of flexibility. We can now have any combinations of sockets and > > installed cpus. > > Agree, only 1 concern > will it bring debugable/ scalable issue by hardcode aml code? I've updated the patch (see below). This version documents how one can build a new version of the Processor() ssdt snippet. I've tested this under linux - there were a few bugs in the previous patch. I also had to replace the dynamically created CPUS array with a dynamically created NTFY method - which is a bit more complicated. -Kevin diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index cc31112..24674fc 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -648,6 +648,78 @@ DefinitionBlock ( Zero /* reserved */ }) + /* CPU hotplug */ + Scope(\_SB) { + /* Objects filled in by run-time generated SSDT */ + External(NTFY, MethodObj) + External(CPON, PkgObj) + + /* Methods called by run-time generated SSDT Processor objects */ + Method (CPMA, 1, NotSerialized) { + // _MAT method - create an madt apic buffer + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + // Local1 = Buffer (in madt apic form) to return + Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0}, Local1) + // Update the processor id, lapic id, and enable/disable status + Store(Arg0, Index(Local1, 2)) + Store(Arg0, Index(Local1, 3)) + Store(Local0, Index(Local1, 4)) + Return (Local1) + } + Method (CPST, 1, NotSerialized) { + // _STA method - return ON status of cpu + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + If (Local0) { Return(0xF) } Else { Return(0x0) } + } + Method (CPEJ, 2, NotSerialized) { + // _EJ0 method - eject callback + Sleep (0xC8) + } + + /* CPU hotplug notify method */ + OperationRegion(PRST, SystemIO, 0xaf00, 32) + Field (PRST, ByteAcc, NoLock, Preserve) + { + PRS, 256 + } + Method(PRSC, 0) { + // Local5 = active cpu bitmap + Store (PRS, Local5) + // Local2 = last read byte from bitmap + Store (Zero, Local2) + // Local0 = cpuid iterator + Store (Zero, Local0) + While (LLess(Local0, SizeOf(CPON))) { + // Local1 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Local0)), Local1) + If (And(Local0, 0x07)) { + // Shift down previously read bitmap byte + ShiftRight(Local2, 1, Local2) + } Else { + // Read next byte from cpu bitmap + Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2) + } + // Local3 = active state for this cpu + Store(And(Local2, 1), Local3) + + If (LNotEqual(Local1, Local3)) { + // State change - update CPON with new state + Store(Local3, Index(CPON, Local0)) + // Do CPU notify + If (LEqual(Local3, 1)) { + NTFY(Local0, 1) + } Else { + NTFY(Local0, 3) + } + } + Increment(Local0) + } + Return(One) + } + } + Scope (\_GPE) { Name(_HID, "ACPI0006") @@ -701,7 +773,8 @@ DefinitionBlock ( } Method(_L02) { - Return(0x01) + // CPU hotplug event + Return(\_SB.PRSC()) } Method(_L03) { Return(0x01) diff --git a/src/acpi.c b/src/acpi.c index 0559443..082ef73 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -406,16 +406,56 @@ build_madt(void) return madt; } +// Encode a hex value +static inline char getHex(u32 val) { + val &= 0x0f; + return (val <= 9) ? ('0' + val) : ('A' + val - 10); +} + +// Encode a length in an SSDT. +static u8 * +encodeLen(u8 *ssdt_ptr, int length, int bytes) +{ + if (bytes <= 1) { + *ssdt_ptr = length & 0x3f; + return ssdt_ptr+1; + } + ssdt_ptr[0] = (((bytes-1) & 0x3) << 6) | (length & 0x0f); + ssdt_ptr[1] = ((length >> 4) & 0xff); + ssdt_ptr[2] = ((length >> 12) & 0xff); + ssdt_ptr[3] = ((length >> 20) & 0xff); + return ssdt_ptr + bytes; +} + +// AML Processor() object. See src/ssdt-proc.dsl for info. +static unsigned char ssdt_proc[] = { + 0x5b,0x83,0x43,0x05,0x43,0x50,0x41,0x41, + 0xaa,0x10,0xb0,0x00,0x00,0x06,0x08,0x49, + 0x44,0x5f,0x5f,0x0a,0xaa,0x08,0x5f,0x48, + 0x49,0x44,0x0d,0x41,0x43,0x50,0x49,0x30, + 0x30,0x30,0x37,0x00,0x14,0x0f,0x5f,0x4d, + 0x41,0x54,0x00,0xa4,0x43,0x50,0x4d,0x41, + 0x49,0x44,0x5f,0x5f,0x14,0x0f,0x5f,0x53, + 0x54,0x41,0x00,0xa4,0x43,0x50,0x53,0x54, + 0x49,0x44,0x5f,0x5f,0x14,0x10,0x5f,0x45, + 0x4a,0x30,0x01,0xa4,0x43,0x50,0x45,0x4a, + 0x49,0x44,0x5f,0x5f,0x68 +}; +#define SD_OFFSET_CPUHEX 6 +#define SD_OFFSET_CPUID1 8 +#define SD_OFFSET_CPUID2 20 + #define SSDT_SIGNATURE 0x54445353 // SSDT static void* build_ssdt(void) { int acpi_cpus = MaxCountCPUs > 0xff ? 0xff : MaxCountCPUs; - // calculate the length of processor block and scope block - // excluding PkgLength - int cpu_length = 13 * acpi_cpus + 4; - - int length = sizeof(struct acpi_table_header) + 3 + cpu_length; + // length = ssdt header + ScopeOp + procs + CPUS package + CPON package + int length = (sizeof(struct acpi_table_header) + + (1+3+4) + + (acpi_cpus * sizeof(ssdt_proc)) + + (1+2+5+(12*acpi_cpus)) + + (1+4+1+2+1+(1*acpi_cpus))); u8 *ssdt = malloc_high(length); if (! ssdt) { warn_noalloc(); @@ -423,47 +463,66 @@ build_ssdt(void) } u8 *ssdt_ptr = ssdt; - ssdt_ptr[9] = 0; // checksum; ssdt_ptr += sizeof(struct acpi_table_header); // build processor scope header *(ssdt_ptr++) = 0x10; // ScopeOp - if (cpu_length <= 0x3e) { - /* Handle 1-4 CPUs with one byte encoding */ - *(ssdt_ptr++) = cpu_length + 1; - } else { - /* Handle 5-314 CPUs with two byte encoding */ - *(ssdt_ptr++) = 0x40 | ((cpu_length + 2) & 0xf); - *(ssdt_ptr++) = (cpu_length + 2) >> 4; - } + ssdt_ptr = encodeLen(ssdt_ptr, length-1, 3); *(ssdt_ptr++) = '_'; // Name - *(ssdt_ptr++) = 'P'; - *(ssdt_ptr++) = 'R'; + *(ssdt_ptr++) = 'S'; + *(ssdt_ptr++) = 'B'; *(ssdt_ptr++) = '_'; - // build object for each processor + // build Processor object for each processor int i; for (i=0; i<acpi_cpus; i++) { - *(ssdt_ptr++) = 0x5B; // ProcessorOp - *(ssdt_ptr++) = 0x83; - *(ssdt_ptr++) = 0x0B; // Length - *(ssdt_ptr++) = 'C'; // Name (CPUxx) - *(ssdt_ptr++) = 'P'; - if ((i & 0xf0) != 0) - *(ssdt_ptr++) = (i >> 4) < 0xa ? (i >> 4) + '0' : (i >> 4) + 'A' - 0xa; - else - *(ssdt_ptr++) = 'U'; - *(ssdt_ptr++) = (i & 0xf) < 0xa ? (i & 0xf) + '0' : (i & 0xf) + 'A' - 0xa; + memcpy(ssdt_ptr, ssdt_proc, sizeof(ssdt_proc)); + ssdt_ptr[SD_OFFSET_CPUHEX] = getHex(i >> 4); + ssdt_ptr[SD_OFFSET_CPUHEX+1] = getHex(i); + ssdt_ptr[SD_OFFSET_CPUID1] = i; + ssdt_ptr[SD_OFFSET_CPUID2] = i; + ssdt_ptr += sizeof(ssdt_proc); + } + + // build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}" + *(ssdt_ptr++) = 0x14; // MethodOp + ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*acpi_cpus), 2); + *(ssdt_ptr++) = 'N'; + *(ssdt_ptr++) = 'T'; + *(ssdt_ptr++) = 'F'; + *(ssdt_ptr++) = 'Y'; + *(ssdt_ptr++) = 0x02; + for (i=0; i<acpi_cpus; i++) { + *(ssdt_ptr++) = 0xA0; // IfOp + ssdt_ptr = encodeLen(ssdt_ptr, 11, 1); + *(ssdt_ptr++) = 0x93; // LEqualOp + *(ssdt_ptr++) = 0x68; // Arg0Op + *(ssdt_ptr++) = 0x0A; // BytePrefix *(ssdt_ptr++) = i; - *(ssdt_ptr++) = 0x10; // Processor block address - *(ssdt_ptr++) = 0xb0; - *(ssdt_ptr++) = 0; - *(ssdt_ptr++) = 0; - *(ssdt_ptr++) = 6; // Processor block length + *(ssdt_ptr++) = 0x86; // NotifyOp + *(ssdt_ptr++) = 'C'; + *(ssdt_ptr++) = 'P'; + *(ssdt_ptr++) = getHex(i >> 4); + *(ssdt_ptr++) = getHex(i); + *(ssdt_ptr++) = 0x69; // Arg1Op } + // build "Name(CPON, Package() { One, One, ..., Zero, Zero, ... })" + *(ssdt_ptr++) = 0x08; // NameOp + *(ssdt_ptr++) = 'C'; + *(ssdt_ptr++) = 'P'; + *(ssdt_ptr++) = 'O'; + *(ssdt_ptr++) = 'N'; + *(ssdt_ptr++) = 0x12; // PackageOp + ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); + *(ssdt_ptr++) = acpi_cpus; + for (i=0; i<acpi_cpus; i++) + *(ssdt_ptr++) = (i < CountCPUs) ? 0x01 : 0x00; + build_header((void*)ssdt, SSDT_SIGNATURE, ssdt_ptr - ssdt, 1); + hexdump(ssdt, ssdt_ptr - ssdt); + return ssdt; } diff --git a/src/ssdt-proc.dsl b/src/ssdt-proc.dsl new file mode 100644 index 0000000..c10d125 --- /dev/null +++ b/src/ssdt-proc.dsl @@ -0,0 +1,50 @@ +/* This file is the basis for the ssdt_proc[] variable in src/acpi.c. + * It defines the contents of the per-cpu Processor() object. At + * runtime, a dynamically generated SSDT will contain one copy of this + * AML snippet for every possible cpu in the system. The objects will + * be placed in the \_SB_ namespace. + * + * To generate a new ssdt_proc[], run the commands: + * cpp -P src/ssdt-proc.dsl > out/ssdt-proc.dsl.i + * iasl -ta -p out/ssdt-proc out/ssdt-proc.dsl.i + * tail -c +37 < out/ssdt-proc.aml | hexdump -e '" " 8/1 "0x%02x," "\n"' + * and then cut-and-paste the output into the src/acpi.c ssdt_proc[] + * array. + * + * In addition to the aml code generated from this file, the + * src/acpi.c file creates a NTFY method with an entry for each cpu: + * Method(NTFY, 2) { + * If (LEqual(Arg0, 0x00)) { Notify(CP00, Arg1) } + * If (LEqual(Arg0, 0x01)) { Notify(CP01, Arg1) } + * ... + * } + * and a CPON array with the list of active and inactive cpus: + * Name(CPON, Package() { One, One, ..., Zero, Zero, ... }) + */ +DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) +/* V------------------ DO NOT EDIT ------------------V */ +{ + Processor (CPAA, 0xAA, 0x0000b010, 0x06) { + Name (ID, 0xAA) +/* ^------------------ DO NOT EDIT ------------------^ + * + * The src/acpi.c code requires the above layout so that it can update + * CPAA and 0xAA with the appropriate CPU id (see SD_OFFSET_CPUHEX, + * CPUID1, CPUID2). Don't change the above without also updating the + * C code. + */ + Name (_HID, "ACPI0007") + External(CPMA, MethodObj) + External(CPST, MethodObj) + External(CPEJ, MethodObj) + Method(_MAT, 0) { + Return(CPMA(ID)) + } + Method (_STA, 0) { + Return(CPST(ID)) + } + Method (_EJ0, 1, NotSerialized) { + Return(CPEJ(ID, Arg0)) + } + } +}

2 1

Alt SeaBIOS SSDT cpu hotplug
by Kevin O'Connor 09 Jul '10

09 Jul '10

Hi, I've been playing with the cpu hotplug SSDT changes. Attached is a proposal for an alternative method of adding ACPI support. The idea is to continue to build a dynamic SSDT based on CountCPUs and MaxCountCPUs. The dynamic SSDT entries just call methods in the main DSDT. This is completely untested. Hopefully the patch will demonstrate the idea though. The objective is to dynamically build an SSDT that looks something like: =========================================================== { Scope (_SB) { External(CPMA, MethodObj) External(CPST, MethodObj) External(CPEJ, MethodObj) #define DefCPU(nr) \ Processor (CP##nr, 0x##nr, 0x0000b010, 0x06) { \ Name (_HID, "ACPI0007") \ Name (ID, 0x##nr) \ Method(_MAT, 0) { \ Return(CPMA(ID)) \ } \ Method (_STA) { \ Return(CPST(ID)) \ } \ Method (_EJ0, 1, NotSerialized) { \ Return(CPEJ(ID, Arg0)) \ } \ } DefCPU(00) DefCPU(01) DefCPU(02) DefCPU(03) DefCPU(AA) Name(CPUS, Package() { CP00, CP01, CP02, CP03, CPAA, }) Name(CPON, Package() { One, One, One, Zero, Zero }) } } =========================================================== with a dynamic number of cpus. The "CPUS" package stores references to the Processor objects, and the "CPON" package stores the state of which cpus are active. With this info, hopefully there is no need to update the MADT tables. Thoughts? -Kevin diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index cc31112..7312d01 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -648,6 +648,81 @@ DefinitionBlock ( Zero /* reserved */ }) + /* CPU hotplug */ + Scope(\_SB) { + /* Objects filled in by run-time generated SSDT */ + External(CPUS, PkgObj) + External(CPON, PkgObj) + + /* Methods called by run-time generated SSDT Processor objects */ + Method (CPMA, 1, NotSerialized) { + // _MAT method - create an madt apic buffer + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + // Local1 = Buffer (in madt apic form) to return + Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0, 0, 0, 0x00}, Local1) + // Update the processor id, lapic id, and enable/disable status + Store(Arg0, Index(Local1, 2)) + Store(Arg0, Index(Local1, 3)) + Store(Local0, Index(Local1, 7)) + Return (Local1) + } + Method (CPST, 1, NotSerialized) { + // _STA method - return ON status of cpu + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + If (Local0) { Return(0xF) } Else { Return(0x0) } + } + Method (CPEJ, 1, NotSerialized) { + // _EJ0 method - eject callback + Sleep (0xC8) + } + + /* CPU hotplug notify method */ + OperationRegion(PRST, SystemIO, 0xaf00, 32) + Field (PRST, ByteAcc, NoLock, Preserve) + { + PRS, 256 + } + Method(PRSC, 0) { + // Local5 = active cpu bitmap + Store (PRS, Local5) + // Local2 = last read byte from bitmap + Store (Zero, Local2) + // Local0 = cpuid iterator + Store (Zero, Local0) + While (LLess(Local0, SizeOf(CPUS))) { + // Local1 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Local0)), Local1) + If (And(Local0, 0x07)) { + // Shift down previously read bitmap byte + ShiftRight(Local2, 1, Local2) + } Else { + // Read next byte from cpu bitmap + Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2) + } + // Local3 = active state for this cpu + Store(And(Local2, 1), Local3) + + If (LNotEqual(Local1, Local3)) { + // State change - update CPON with new state + Store(Local3, Index(CPON, Local0)) + // Local4 = Ref to Processor object + Store(DerefOf(Index(CPUS, Local0)), Local4) + // Do CPU notify + If (LEqual(Local3, 1)) { + Notify(Local4, 1) + } Else { + Notify(Local4, 3) + } + } + Increment(Local0) + } + Return(One) + } + } + + Scope (\_GPE) { Name(_HID, "ACPI0006") @@ -701,7 +776,8 @@ DefinitionBlock ( } Method(_L02) { - Return(0x01) + // CPU hotplug event + Return(\_SB.PRSC()) } Method(_L03) { Return(0x01) diff --git a/src/acpi.c b/src/acpi.c index 0559443..675b22a 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -406,16 +406,62 @@ build_madt(void) return madt; } +// Encode a hex value +static inline char getHex(u32 val) { + val &= 0x0f; + return (val <= 9) ? ('0' + val) : ('A' + val - 10); +} + +// Encode a length in an SSDT. +static u8 * +encodeLen(u8 *ssdt_ptr, int length, int bytes) +{ + if (bytes <= 1) { + *ssdt_ptr = length & 0x3f; + return ssdt_ptr+1; + } + ssdt_ptr[0] = (((bytes-1) & 0x3) << 6) | (length & 0x0f); + ssdt_ptr[1] = ((length >> 4) & 0xff); + ssdt_ptr[2] = ((length >> 12) & 0xff); + ssdt_ptr[3] = ((length >> 20) & 0xff); + return ssdt_ptr + bytes; +} + +// AML code extract for the following ASL: +// Processor (CPAA, 0xAA, 0x0000b010, 0x06) { +// Name (_HID, "ACPI0007") +// Name (ID, 0xAA) +// Method (_MAT, 0) { Return(CPMA(ID)) } +// Method (_STA) { Return(CPST(ID)) } +// Method (_EJ0, 1, NotSerialized) { Return(CPEJ(ID, Arg0)) } } +static unsigned char ssdt_proc[] = { + 0x5B,0x83,0x43,0x05,0x43,0x50,0x41,0x41, + 0xAA,0x10,0xB0,0x00,0x00,0x06,0x08,0x5F, + 0x48,0x49,0x44,0x0D,0x41,0x43,0x50,0x49, + 0x30,0x30,0x30,0x37,0x00,0x08,0x49,0x44, + 0x5F,0x5F,0x0A,0xAA,0x14,0x0F,0x5F,0x4D, + 0x41,0x54,0x00,0xA4,0x43,0x50,0x4D,0x41, + 0x49,0x44,0x5F,0x5F,0x14,0x0F,0x5F,0x53, + 0x54,0x41,0x00,0xA4,0x43,0x50,0x53,0x54, + 0x49,0x44,0x5F,0x5F,0x14,0x10,0x5F,0x45, + 0x4A,0x30,0x01,0xA4,0x43,0x50,0x45,0x4A, + 0x49,0x44,0x5F,0x5F,0x68 +}; +#define SD_OFFSET_CPUID1 8 +#define SD_OFFSET_CPUID2 35 +#define SD_OFFSET_CPUHEX 6 + #define SSDT_SIGNATURE 0x54445353 // SSDT static void* build_ssdt(void) { int acpi_cpus = MaxCountCPUs > 0xff ? 0xff : MaxCountCPUs; - // calculate the length of processor block and scope block - // excluding PkgLength - int cpu_length = 13 * acpi_cpus + 4; - - int length = sizeof(struct acpi_table_header) + 3 + cpu_length; + // length = ssdt header + ScopeOp + procs + CPUS package + CPON package + int length = (sizeof(struct acpi_table_header) + + (1+3+4) + + (acpi_cpus * sizeof(ssdt_proc)) + + (1+4+1+2+1+(4*acpi_cpus)) + + (1+4+1+2+1+(1*acpi_cpus))); u8 *ssdt = malloc_high(length); if (! ssdt) { warn_noalloc(); @@ -423,45 +469,60 @@ build_ssdt(void) } u8 *ssdt_ptr = ssdt; - ssdt_ptr[9] = 0; // checksum; ssdt_ptr += sizeof(struct acpi_table_header); // build processor scope header *(ssdt_ptr++) = 0x10; // ScopeOp - if (cpu_length <= 0x3e) { - /* Handle 1-4 CPUs with one byte encoding */ - *(ssdt_ptr++) = cpu_length + 1; - } else { - /* Handle 5-314 CPUs with two byte encoding */ - *(ssdt_ptr++) = 0x40 | ((cpu_length + 2) & 0xf); - *(ssdt_ptr++) = (cpu_length + 2) >> 4; - } + ssdt_ptr = encodeLen(ssdt_ptr, length-1, 3); *(ssdt_ptr++) = '_'; // Name - *(ssdt_ptr++) = 'P'; - *(ssdt_ptr++) = 'R'; + *(ssdt_ptr++) = 'S'; + *(ssdt_ptr++) = 'B'; *(ssdt_ptr++) = '_'; - // build object for each processor + // build Processor object for each processor int i; for (i=0; i<acpi_cpus; i++) { - *(ssdt_ptr++) = 0x5B; // ProcessorOp - *(ssdt_ptr++) = 0x83; - *(ssdt_ptr++) = 0x0B; // Length - *(ssdt_ptr++) = 'C'; // Name (CPUxx) + memcpy(ssdt_ptr, ssdt_proc, sizeof(ssdt_proc)); + ssdt_ptr[SD_OFFSET_CPUID1] = i; + ssdt_ptr[SD_OFFSET_CPUID2] = i; + ssdt_ptr[SD_OFFSET_CPUHEX] = getHex(i >> 4); + ssdt_ptr[SD_OFFSET_CPUHEX+1] = getHex(i); + ssdt_ptr += sizeof(ssdt_proc); + } + + // build "Name(CPUS, Package() { CP00, CP01, ... }" + *(ssdt_ptr++) = 0x08; // NameOp + *(ssdt_ptr++) = 'C'; + *(ssdt_ptr++) = 'P'; + *(ssdt_ptr++) = 'U'; + *(ssdt_ptr++) = 'S'; + *(ssdt_ptr++) = 0x12; // PackageOp + ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(4*acpi_cpus), 2); + *(ssdt_ptr++) = acpi_cpus; + for (i=0; i<acpi_cpus; i++) { + *(ssdt_ptr++) = 'C'; *(ssdt_ptr++) = 'P'; - if ((i & 0xf0) != 0) - *(ssdt_ptr++) = (i >> 4) < 0xa ? (i >> 4) + '0' : (i >> 4) + 'A' - 0xa; - else - *(ssdt_ptr++) = 'U'; - *(ssdt_ptr++) = (i & 0xf) < 0xa ? (i & 0xf) + '0' : (i & 0xf) + 'A' - 0xa; - *(ssdt_ptr++) = i; - *(ssdt_ptr++) = 0x10; // Processor block address - *(ssdt_ptr++) = 0xb0; - *(ssdt_ptr++) = 0; - *(ssdt_ptr++) = 0; - *(ssdt_ptr++) = 6; // Processor block length + *(ssdt_ptr++) = getHex(i >> 4); + *(ssdt_ptr++) = getHex(i); } + // build "Name(CPON, Package() { One, One, ..., Zero, Zero, ... }" + *(ssdt_ptr++) = 0x08; // NameOp + *(ssdt_ptr++) = 'C'; + *(ssdt_ptr++) = 'P'; + *(ssdt_ptr++) = 'O'; + *(ssdt_ptr++) = 'N'; + *(ssdt_ptr++) = 0x12; // PackageOp + ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); + *(ssdt_ptr++) = acpi_cpus; + for (i=0; i<acpi_cpus; i++) + if (i < CountCPUs) + *(ssdt_ptr++) = 0x01; + else + *(ssdt_ptr++) = 0x00; + + hexdump(ssdt, ssdt_ptr - ssdt); + build_header((void*)ssdt, SSDT_SIGNATURE, ssdt_ptr - ssdt, 1); return ssdt;

4 7

Re: [SeaBIOS] [PATCH] KVM vcpu hotplug seabios infrastructure
by Kevin O'Connor 09 Jul '10

09 Jul '10

On Thu, Jul 08, 2010 at 08:52:19PM +0800, Liu, Jinsong wrote: > Kevin O'Connor wrote: > > I've also noticed this patch increases the seabios build size by 18K. > > This isn't great because it is 18K that then can't be used by option > > roms, and it brings seabios very close to its current 128K limit (124K > > when full debugging enabled). [...] > Can the limitation 128K be increased? Now that qemu doesn't directly place option roms in the c/d segments, it can probably be increased to 256K. I don't know if qemu changes would be needed (it doesn't seem like it). Expanding beyond 256K would be a bit of work. The limit due to option roms is more restrictive. The rom space (at least on FC13) for vgabios, e1000 gpxe, and vapic comes to 116.5KiB - add another 8KiB for additional gpxe roms and we're basically back to the 128KiB limit. -Kevin

1 0

Re: [SeaBIOS] [PATCH] KVM vcpu hotplug seabios infrastructure
by Kevin O'Connor 08 Jul '10

08 Jul '10

On Sun, Jun 27, 2010 at 01:28:52PM +0800, Liu, Jinsong wrote: > > Attached is updated patch: I've been looking at this patch. I've had a hard time understanding how the SSDT code works. It looks like the OS calls the \_GPE._L02 method, which reads ioport 0xaf00-0xaf20, determines which processors have changed state, updates the madt tables, and then calls Notify(Cxx,). Why is the madt table read/written? I've also noticed this patch increases the seabios build size by 18K. This isn't great because it is 18K that then can't be used by option roms, and it brings seabios very close to its current 128K limit (124K when full debugging enabled). -Kevin

2 1

[PATCH] virtio: Clear interrupt status register in virtio-blk
by Stefan Hajnoczi 08 Jul '10

08 Jul '10

The VRING_AVAIL_F_NO_INTERRUPT flag is a hint that interrupts should be suppressed. It does not guarantee that interrupts will not be raised. Therefore, make sure to clear the interrupt after each virtio-blk read. This avoids a stuck interrupt interfering with the OS loaded later in the boot process. Signed-off-by: Stefan Hajnoczi <stefanha(a)linux.vnet.ibm.com> --- src/virtio-blk.c | 6 ++++++ src/virtio-pci.h | 4 ++++ 2 files changed, 10 insertions(+), 0 deletions(-) diff --git a/src/virtio-blk.c b/src/virtio-blk.c index 16d9ad8..74af488 100644 --- a/src/virtio-blk.c +++ b/src/virtio-blk.c @@ -62,6 +62,12 @@ virtio_blk_read(struct disk_op_s *op) /* Reclaim virtqueue element */ vring_get_buf(vq, NULL); + + /* Clear interrupt status register. Avoid leaving interrupts stuck if + * VRING_AVAIL_F_NO_INTERRUPT was ignored and interrupts were raised. + */ + vp_get_isr(GET_GLOBAL(vdrive_g->ioaddr)); + return status == VIRTIO_BLK_S_OK ? DISK_RET_SUCCESS : DISK_RET_EBADTRACK; } diff --git a/src/virtio-pci.h b/src/virtio-pci.h index 9da761d..d21d5a5 100644 --- a/src/virtio-pci.h +++ b/src/virtio-pci.h @@ -71,6 +71,10 @@ static inline void vp_set_status(unsigned int ioaddr, u8 status) outb(status, ioaddr + VIRTIO_PCI_STATUS); } +static inline u8 vp_get_isr(unsigned int ioaddr) +{ + return inb(ioaddr + VIRTIO_PCI_ISR); +} static inline void vp_reset(unsigned int ioaddr) { -- 1.7.1

3 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS