SeaBIOS September 2013

seabios@seabios.org

14 participants
41 discussions

Re: [SeaBIOS] Booting Linux, FreeBSD off AHCI takes longer than expected
by Idwer Vollering 28 Sep '13

28 Sep '13

2013/9/27 Idwer Vollering <vidwer(a)gmail.com>: > Linux takes somewhere between 30 to 60 seconds from the grub menu to > show early bootup console output, FreeBSD takes over 10 minutes to > just load boot0, boot2 and kernel (and every module from > /boot/loader.conf), then shows its boot menu [1]. So, after digging into this deeper I came to the conclusion that setting CONFIG_DEBUG_SERIAL=n in SeaBIOS' .config was the culprit. Could setting CONFIG_DEBUG_SERIAL=y be blocking? Idwer

1 0

Booting Linux, FreeBSD off AHCI takes longer than expected
by Idwer Vollering 27 Sep '13

27 Sep '13

Linux takes somewhere between 30 to 60 seconds from the grub menu to show early bootup console output, FreeBSD takes over 10 minutes to just load boot0, boot2 and kernel (and every module from /boot/loader.conf), then shows its boot menu [1]. Linux is installed on a mechanical drive, FreeBSD boots off an SSD. [1] http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install/boot-load… coreboot is built for Asus F2A85-M with CONFIG_HUDSON_SATA_AHCI=y and SeaBIOS is built with CONFIG_AHCI=y. As you can see in the output below, I have turned parallelism (CONFIG_THREADS) off: Start bios (version rel-1.7.3-68-g0b3607f-dirty-20130926_230727-mint) Attempting to find coreboot table Found coreboot table forwarder. Now attempting to find coreboot memory map Add to e820 map: 00000000 00001000 2 Add to e820 map: 00001000 0009f000 1 Add to e820 map: 000c0000 bf05f000 1 Add to e820 map: bf11f000 00ee1000 2 Add to e820 map: c0000000 20000000 2 Add to e820 map: f8000000 04000000 2 Add to e820 map: 00000000 1f000000 1 Add to e820 map: 00000000 00004000 1 ----- [ seabios log starts here ] ----- Found coreboot cbmem console @ bf11f400 Found mainboard ASUS F2A85-M malloc preinit Add to e820 map: 000a0000 00050000 -1 Add to e820 map: 000f0000 00010000 2 Add to e820 map: bf10f000 00010000 2 _malloc zone=0x000ee25c handle=ffffffff size=46471 align=10 ret=0xbf1039b0 (detail=0xbf10ef40) Relocating init from 0x000e2da1 to 0xbf1039b0 (size 46471) malloc init Found CBFS header at 0xfffffcb0 _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf103880 (detail=0xbf103920) Add romfile: cmos_layout.bin (size=1776) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf1037b0 (detail=0xbf103850) Add romfile: pci1002,9904.rom (size=65536) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf1036e0 (detail=0xbf103780) Add romfile: fallback/payload (size=60704) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf103610 (detail=0xbf1036b0) Add romfile: (size=2712) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf103540 (detail=0xbf1035e0) Add romfile: hudson/fwm (size=16) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf103470 (detail=0xbf103510) Add romfile: hudson/xhci (size=24986) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf1033a0 (detail=0xbf103440) Add romfile: config (size=4786) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf1032d0 (detail=0xbf103370) Add romfile: (size=35416) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf103200 (detail=0xbf1032a0) Add romfile: hudson/imc (size=65536) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf103130 (detail=0xbf1031d0) Add romfile: fallback/romstage (size=528516) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf103060 (detail=0xbf103100) Add romfile: fallback/coreboot_ram (size=281682) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf102f90 (detail=0xbf103030) Add romfile: (size=7250456) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf102ec0 (detail=0xbf102f60) Add romfile: s3nv (size=32768) _malloc zone=0xbf10ee6b handle=ffffffff size=156 align=10 ret=0xbf102df0 (detail=0xbf102e90) Add romfile: (size=31832) init ivt init bda Add to e820 map: 0009fc00 00000400 2 init bios32 init PMM init PNPBIOS table init keyboard init mouse init pic math cp init tsc calibrate start=240747843 end=246234841 diff=5486998 CPU Mhz=3196 init timer PCI probe _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102da0 (detail=0xbf102dc0) PCI device 00:00.0 (vd=1022:1410 c=0600) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102d50 (detail=0xbf102d70) PCI device 00:01.0 (vd=1002:9904 c=0300) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102d00 (detail=0xbf102d20) PCI device 00:01.1 (vd=1002:9902 c=0403) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102cb0 (detail=0xbf102cd0) PCI device 00:10.0 (vd=1022:7812 c=0c03) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102c60 (detail=0xbf102c80) PCI device 00:10.1 (vd=1022:7812 c=0c03) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102c10 (detail=0xbf102c30) PCI device 00:11.0 (vd=1022:7801 c=0106) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102bc0 (detail=0xbf102be0) PCI device 00:12.0 (vd=1022:7807 c=0c03) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102b70 (detail=0xbf102b90) PCI device 00:12.2 (vd=1022:7808 c=0c03) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102b20 (detail=0xbf102b40) PCI device 00:13.0 (vd=1022:7807 c=0c03) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102ad0 (detail=0xbf102af0) PCI device 00:13.2 (vd=1022:7808 c=0c03) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102a80 (detail=0xbf102aa0) PCI device 00:14.0 (vd=1022:780b c=0c05) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102a30 (detail=0xbf102a50) PCI device 00:14.2 (vd=1022:780d c=0403) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf1029e0 (detail=0xbf102a00) PCI device 00:14.3 (vd=1022:780e c=0601) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102990 (detail=0xbf1029b0) PCI device 00:14.4 (vd=1022:780f c=0604) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102940 (detail=0xbf102960) PCI device 00:14.5 (vd=1022:7809 c=0c03) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf1028f0 (detail=0xbf102910) PCI device 00:14.7 (vd=1022:7806 c=0805) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf1028a0 (detail=0xbf1028c0) PCI device 00:15.0 (vd=1022:43a0 c=0604) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102850 (detail=0xbf102870) PCI device 00:15.1 (vd=1022:43a1 c=0604) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102800 (detail=0xbf102820) PCI device 00:18.0 (vd=1022:1400 c=0600) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf1027b0 (detail=0xbf1027d0) PCI device 00:18.1 (vd=1022:1401 c=0600) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102760 (detail=0xbf102780) PCI device 00:18.2 (vd=1022:1402 c=0600) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102710 (detail=0xbf102730) PCI device 00:18.3 (vd=1022:1403 c=0600) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf1026c0 (detail=0xbf1026e0) PCI device 00:18.4 (vd=1022:1404 c=0600) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102670 (detail=0xbf102690) PCI device 00:18.5 (vd=1022:1405 c=0600) _malloc zone=0xbf10ee6b handle=ffffffff size=32 align=10 ret=0xbf102620 (detail=0xbf102640) PCI device 03:00.0 (vd=10ec:8168 c=0200) Found 25 PCI devices (max PCI bus is 03) Relocating coreboot bios tables _malloc zone=0xbf10ee67 handle=ffffffff size=48 align=10 ret=0x000f49a0 (detail=0xbf1025f0) Copying PIR from 0xbf12f400 to 0x000f49a0 _malloc zone=0xbf10ee67 handle=ffffffff size=540 align=10 ret=0x000f4780 (detail=0xbf1025c0) Copying MPTABLE from 0xbf130400/bf130410 to 0x000f4780 _malloc zone=0xbf10ee67 handle=ffffffff size=20 align=10 ret=0x000f4760 (detail=0xbf102590) Copying ACPI RSDP from 0xbf131400 to 0x000f4760 _malloc zone=0xbf10ee67 handle=ffffffff size=31 align=10 ret=0x000f4740 (detail=0xbf102560) Copying SMBIOS entry point from 0xbf13c800 to 0x000f4740 rsdp=0x000f4760 rsdt=0xbf131424 fadt=0xbf132db0 pm_tmr_blk=818 Using pmtimer, ioport 0x818 Scan for VGA option rom Attempting to init PCI bdf 00:01.0 (vd 1002:9904) Copying data 65536@0xff800778 to 65536@0x000c0000 Checking rom 0x000c0000 (sig aa55 size 125) Running option rom at c000:0003 Turning on vga text mode console SeaBIOS (version rel-1.7.3-68-g0b3607f-dirty-20130926_230727-mint) init usb _malloc zone=0xbf10ee5f handle=ffffffff size=112 align=10 ret=0x000eda50 (detail=0xbf102530) XHCI init on dev 00:10.0: regs @ 0xf0148000, 4 ports, 32 slots XHCI extcap 0x1 @ f0148500 XHCI protocol USB 3.00, 2 ports (offset 1) XHCI protocol USB 2.00, 2 ports (offset 3) _malloc zone=0xbf10ee63 handle=ffffffff size=264 align=40 ret=0xbf11eec0 (detail=0xbf102500) _malloc zone=0xbf10ee63 handle=ffffffff size=16 align=40 ret=0xbf11ee80 (detail=0xbf1024d0) _malloc zone=0xbf10ee63 handle=ffffffff size=288 align=100 ret=0xbf11ed00 (detail=0xbf1024a0) _malloc zone=0xbf10ee5f handle=ffffffff size=288 align=100 ret=0x000ed900 (detail=0xbf102470) configure_xhci: resetting _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #1: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #2: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #3: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #4: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) XHCI no devices found _free 0xbf11ee80 (detail=0xbf1024d0) _free 0x000ed900 (detail=0xbf102470) _free 0xbf11ed00 (detail=0xbf1024a0) _free 0xbf11eec0 (detail=0xbf102500) _free 0x000eda50 (detail=0xbf102530) _malloc zone=0xbf10ee5f handle=ffffffff size=112 align=10 ret=0x000eda50 (detail=0xbf102530) XHCI init on dev 00:10.1: regs @ 0xf014a000, 4 ports, 32 slots XHCI extcap 0x1 @ f014a500 XHCI protocol USB 3.00, 2 ports (offset 1) XHCI protocol USB 2.00, 2 ports (offset 3) _malloc zone=0xbf10ee63 handle=ffffffff size=264 align=40 ret=0xbf11eec0 (detail=0xbf102500) _malloc zone=0xbf10ee63 handle=ffffffff size=16 align=40 ret=0xbf11ee80 (detail=0xbf1024d0) _malloc zone=0xbf10ee63 handle=ffffffff size=288 align=100 ret=0xbf11ed00 (detail=0xbf1024a0) _malloc zone=0xbf10ee5f handle=ffffffff size=288 align=100 ret=0x000ed900 (detail=0xbf102470) configure_xhci: resetting _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #1: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #2: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #3: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102420 (detail=0xbf102440) xhci_hub_detect port #4: 0x000002a0, powered, pls 5, speed 0 [ - ] _free 0xbf102420 (detail=0xbf102440) XHCI no devices found _free 0xbf11ee80 (detail=0xbf1024d0) _free 0x000ed900 (detail=0xbf102470) _free 0xbf11ed00 (detail=0xbf1024a0) _free 0xbf11eec0 (detail=0xbf102500) _free 0x000eda50 (detail=0xbf102530) _malloc zone=0xbf10ee6b handle=ffffffff size=72 align=10 ret=0xbf1024e0 (detail=0xbf102530) EHCI init on dev 00:12.2 (regs=0xf014f820) _malloc zone=0xbf10ee63 handle=ffffffff size=4096 align=1000 ret=0xbf11e000 (detail=0xbf1024b0) _malloc zone=0xbf10ee63 handle=ffffffff size=68 align=80 ret=0xbf11df80 (detail=0xbf102480) _malloc zone=0xbf10ee63 handle=ffffffff size=68 align=80 ret=0xbf11df00 (detail=0xbf102450) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) set_address 0xbf1024e0 ehci_alloc_async_pipe 0xbf1024e0 0 _malloc zone=0xbf10ee6b handle=ffffffff size=92 align=80 ret=0xbf102300 (detail=0xbf1023d0) ehci_control 0xbf102350 (dir=0 cmd=8 data=0) _malloc zone=0xbf10ee6b handle=ffffffff size=192 align=40 ret=0xbf102240 (detail=0xbf1023a0) _free 0xbf102240 (detail=0xbf1023a0) ehci_alloc_async_pipe 0xbf1024e0 0 config_usb: 0xbf102350 ehci_control 0xbf102350 (dir=128 cmd=8 data=8) _malloc zone=0xbf10ee6b handle=ffffffff size=192 align=40 ret=0xbf102240 (detail=0xbf1023a0) _free 0xbf102240 (detail=0xbf1023a0) device rev=0200 cls=00 sub=00 proto=00 size=40 ehci_alloc_async_pipe 0xbf1024e0 0 ehci_control 0xbf102350 (dir=128 cmd=8 data=9) _malloc zone=0xbf10ee6b handle=ffffffff size=192 align=40 ret=0xbf102240 (detail=0xbf1023a0) _free 0xbf102240 (detail=0xbf1023a0) _malloc zone=0xbf10ee6b handle=ffffffff size=67 align=10 ret=0xbf1022b0 (detail=0xbf1023a0) ehci_control 0xbf102350 (dir=128 cmd=8 data=67) _malloc zone=0xbf10ee6b handle=ffffffff size=192 align=40 ret=0xbf1021c0 (detail=0xbf102370) _free 0xbf1021c0 (detail=0xbf102370) _free 0xbf1022b0 (detail=0xbf1023a0) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=24 align=10 ret=0xbf102380 (detail=0xbf1023a0) OHCI init on dev 00:12.0 (regs=0xf014c000) _malloc zone=0xbf10ee63 handle=ffffffff size=256 align=100 ret=0xbf11de00 (detail=0xbf1022d0) _malloc zone=0xbf10ee63 handle=ffffffff size=16 align=10 ret=0xbf11dff0 (detail=0xbf1022a0) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102360 (detail=0xbf102270) _free 0xbf102360 (detail=0xbf102270) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102360 (detail=0xbf102270) set_address 0xbf102380 ohci_alloc_async_pipe 0xbf102380 _malloc zone=0xbf10ee6b handle=ffffffff size=40 align=10 ret=0xbf102210 (detail=0xbf102240) ohci_control 0xbf102220 _malloc zone=0xbf10ee6b handle=ffffffff size=48 align=10 ret=0xbf1021b0 (detail=0xbf1021e0) _free 0xbf1021b0 (detail=0xbf1021e0) ohci_alloc_async_pipe 0xbf102380 config_usb: 0xbf102220 ohci_control 0xbf102220 _malloc zone=0xbf10ee6b handle=ffffffff size=48 align=10 ret=0xbf1021b0 (detail=0xbf1021e0) _free 0xbf1021b0 (detail=0xbf1021e0) device rev=0110 cls=00 sub=00 proto=00 size=08 ohci_alloc_async_pipe 0xbf102380 ohci_control 0xbf102220 _malloc zone=0xbf10ee6b handle=ffffffff size=48 align=10 ret=0xbf1021b0 (detail=0xbf1021e0) _free 0xbf1021b0 (detail=0xbf1021e0) _malloc zone=0xbf10ee6b handle=ffffffff size=59 align=10 ret=0xbf1021a0 (detail=0xbf1021e0) ohci_control 0xbf102220 _malloc zone=0xbf10ee6b handle=ffffffff size=48 align=10 ret=0xbf102140 (detail=0xbf102170) _free 0xbf102140 (detail=0xbf102170) ohci_control 0xbf102220 _malloc zone=0xbf10ee6b handle=ffffffff size=48 align=10 ret=0xbf102140 (detail=0xbf102170) _free 0xbf102140 (detail=0xbf102170) usb_hid_setup 0xbf102220 ohci_control 0xbf102220 _malloc zone=0xbf10ee6b handle=ffffffff size=48 align=10 ret=0xbf102140 (detail=0xbf102170) _free 0xbf102140 (detail=0xbf102170) ohci_control 0xbf102220 _malloc zone=0xbf10ee6b handle=ffffffff size=48 align=10 ret=0xbf102140 (detail=0xbf102170) _free 0xbf102140 (detail=0xbf102170) ohci_alloc_intr_pipe 0xbf102380 3 _malloc zone=0xbf10ee5f handle=ffffffff size=40 align=10 ret=0x000eda90 (detail=0xbf102170) _malloc zone=0xbf10ee5f handle=ffffffff size=240 align=10 ret=0x000ed9a0 (detail=0xbf102140) _malloc zone=0xbf10ee5f handle=ffffffff size=120 align=10 ret=0x000ed920 (detail=0xbf102110) USB keyboard initialized _free 0xbf1021a0 (detail=0xbf1021e0) _free 0xbf102360 (detail=0xbf102270) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102360 (detail=0xbf102270) _free 0xbf102360 (detail=0xbf102270) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102360 (detail=0xbf102270) _free 0xbf102360 (detail=0xbf102270) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102360 (detail=0xbf102270) _free 0xbf102360 (detail=0xbf102270) ohci_free_pipes 0xbf102380 _free 0xbf102210 (detail=0xbf102240) _free 0xbf102400 (detail=0xbf102420) ehci_free_pipes 0xbf1024e0 _free 0xbf102300 (detail=0xbf1023d0) _free 0xbf11e000 (detail=0xbf1024b0) _free 0xbf11df80 (detail=0xbf102480) _free 0xbf11df00 (detail=0xbf102450) _free 0xbf1024e0 (detail=0xbf102530) _malloc zone=0xbf10ee6b handle=ffffffff size=72 align=10 ret=0xbf1024e0 (detail=0xbf102530) EHCI init on dev 00:13.2 (regs=0xf014f920) _malloc zone=0xbf10ee63 handle=ffffffff size=4096 align=1000 ret=0xbf11e000 (detail=0xbf1024b0) _malloc zone=0xbf10ee63 handle=ffffffff size=68 align=80 ret=0xbf11df80 (detail=0xbf102480) _malloc zone=0xbf10ee63 handle=ffffffff size=68 align=80 ret=0xbf11df00 (detail=0xbf102450) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102400 (detail=0xbf102420) _free 0xbf102400 (detail=0xbf102420) ehci_free_pipes 0xbf1024e0 _free 0xbf11e000 (detail=0xbf1024b0) _free 0xbf11df80 (detail=0xbf102480) _free 0xbf11df00 (detail=0xbf102450) _free 0xbf1024e0 (detail=0xbf102530) _malloc zone=0xbf10ee6b handle=ffffffff size=24 align=10 ret=0xbf102510 (detail=0xbf102530) OHCI init on dev 00:14.5 (regs=0xf014e000) _malloc zone=0xbf10ee63 handle=ffffffff size=256 align=100 ret=0xbf11ef00 (detail=0xbf1024e0) _malloc zone=0xbf10ee63 handle=ffffffff size=16 align=10 ret=0xbf11eef0 (detail=0xbf1024b0) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102460 (detail=0xbf102480) _free 0xbf102460 (detail=0xbf102480) _malloc zone=0xbf10ee6b handle=ffffffff size=28 align=10 ret=0xbf102460 (detail=0xbf102480) _free 0xbf102460 (detail=0xbf102480) ohci_free_pipes 0xbf102510 _free 0xbf11ef00 (detail=0xbf1024e0) _free 0xbf11eef0 (detail=0xbf1024b0) init ps2port i8042_flush i8042_command cmd=1aa i8042_wait_write i8042_wait_read i8042 param=55 i8042_command cmd=1ab i8042_wait_write i8042_wait_read i8042 param=0 ps2_command aux=0 cmd=2ff i8042 ctr old=30 new=30 i8042_command cmd=1060 i8042_wait_write i8042_wait_write i8042_command cmd=1060 i8042_wait_write i8042_wait_write ps2_sendbyte aux=0 cmd=ff i8042_kbd_write c=255 i8042_wait_write ps2 read fe Got ps2 nak (status=51) i8042_command cmd=1060 i8042_wait_write i8042_wait_write ps2 command 2ff failed (aux=0) init lpt Found 0 lpt ports init serial Found 1 serial ports init floppy drives init hard drives init ahci _malloc zone=0xbf10ee67 handle=ffffffff size=20 align=10 ret=0x000f4720 (detail=0xbf1024e0) _malloc zone=0xbf10ee5f handle=ffffffff size=2048 align=10 ret=0x000ed120 (detail=0xbf1024b0) AHCI controller at 11.0, iobase f014f000, irq 0 AHCI: cap 0xf3309f07, ports_impl 0xc _malloc zone=0xbf10ee6b handle=ffffffff size=68 align=10 ret=0xbf102430 (detail=0xbf102480) _malloc zone=0xbf10ee6b handle=ffffffff size=1024 align=400 ret=0xbf101c00 (detail=0xbf102400) _malloc zone=0xbf10ee6b handle=ffffffff size=256 align=100 ret=0xbf102000 (detail=0xbf1023d0) _malloc zone=0xbf10ee6b handle=ffffffff size=256 align=100 ret=0xbf101b00 (detail=0xbf102350) AHCI/2: probing AHCI/2: link up AHCI/2: send cmd ... AHCI/2: ... intbits 0x40000001, status 0x51 ... AHCI/2: ... finished, status 0x51, ERROR 0x4 AHCI/2: send cmd ... AHCI/2: ... intbits 0x2, status 0x58 ... AHCI/2: ... finished, status 0x58, OK _malloc zone=0xbf10ee6b handle=ffffffff size=80 align=10 ret=0xbf102250 (detail=0xbf102320) Searching bootorder for: /pci@i0cf8/*@11/drive@2/disk@0 _malloc zone=0xbf10ee67 handle=ffffffff size=68 align=10 ret=0x000f46d0 (detail=0xbf102220) _free 0xbf102430 (detail=0xbf102480) _free 0xbf101c00 (detail=0xbf102400) _free 0xbf102000 (detail=0xbf1023d0) _free 0xbf101b00 (detail=0xbf102350) _malloc zone=0xbf10ee5f handle=ffffffff size=1024 align=400 ret=0x000ecc00 (detail=0xbf102480) _malloc zone=0xbf10ee5f handle=ffffffff size=256 align=100 ret=0x000ed000 (detail=0xbf102450) _malloc zone=0xbf10ee5f handle=ffffffff size=256 align=100 ret=0x000ecb00 (detail=0xbf102420) AHCI/2: registering: "AHCI/2: Maxtor 6L250S0 ATA-7 Hard-Disk (233 GiBytes)" _malloc zone=0xbf10ee6b handle=ffffffff size=24 align=10 ret=0xbf1023d0 (detail=0xbf1023f0) Registering bootable: AHCI/2: Maxtor 6L250S0 ATA-7 Hard-Disk (233 GiBytes) (type:2 prio:103 data:f46d0) _malloc zone=0xbf10ee6b handle=ffffffff size=68 align=10 ret=0xbf1021d0 (detail=0xbf102350) _malloc zone=0xbf10ee6b handle=ffffffff size=1024 align=400 ret=0xbf101c00 (detail=0xbf1021a0) _malloc zone=0xbf10ee6b handle=ffffffff size=256 align=100 ret=0xbf101b00 (detail=0xbf1020e0) _malloc zone=0xbf10ee6b handle=ffffffff size=256 align=100 ret=0xbf101a00 (detail=0xbf1020b0) AHCI/3: probing AHCI/3: link up AHCI/3: send cmd ... AHCI/3: ... intbits 0x40000001, status 0x51 ... AHCI/3: ... finished, status 0x51, ERROR 0x4 AHCI/3: send cmd ... AHCI/3: ... intbits 0x2, status 0x58 ... AHCI/3: ... finished, status 0x58, OK _malloc zone=0xbf10ee6b handle=ffffffff size=80 align=10 ret=0xbf102030 (detail=0xbf102080) Searching bootorder for: /pci@i0cf8/*@11/drive@3/disk@0 _malloc zone=0xbf10ee67 handle=ffffffff size=68 align=10 ret=0x000f4680 (detail=0xbf102000) _free 0xbf1021d0 (detail=0xbf102350) _free 0xbf101c00 (detail=0xbf1021a0) _free 0xbf101b00 (detail=0xbf1020e0) _free 0xbf101a00 (detail=0xbf1020b0) _malloc zone=0xbf10ee5f handle=ffffffff size=1024 align=400 ret=0x000ec400 (detail=0xbf102350) _malloc zone=0xbf10ee5f handle=ffffffff size=256 align=100 ret=0x000eca00 (detail=0xbf1021f0) _malloc zone=0xbf10ee5f handle=ffffffff size=256 align=100 ret=0x000ec900 (detail=0xbf1021c0) AHCI/3: registering: "AHCI/3: OCZ-VERTEX2 ATA-8 Hard-Disk (57241 MiBytes)" _malloc zone=0xbf10ee6b handle=ffffffff size=24 align=10 ret=0xbf102300 (detail=0xbf1020e0) Registering bootable: AHCI/3: OCZ-VERTEX2 ATA-8 Hard-Disk (57241 MiBytes) (type:2 prio:103 data:f4680) init megasas Scan for option roms Attempting to init PCI bdf 00:00.0 (vd 1022:1410) Attempting to map option rom on dev 00:00.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:01.1 (vd 1002:9902) Attempting to map option rom on dev 00:01.1 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:10.0 (vd 1022:7812) Attempting to map option rom on dev 00:10.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:10.1 (vd 1022:7812) Attempting to map option rom on dev 00:10.1 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:11.0 (vd 1022:7801) Attempting to map option rom on dev 00:11.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:12.0 (vd 1022:7807) Attempting to map option rom on dev 00:12.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:12.2 (vd 1022:7808) Attempting to map option rom on dev 00:12.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:13.0 (vd 1022:7807) Attempting to map option rom on dev 00:13.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:13.2 (vd 1022:7808) Attempting to map option rom on dev 00:13.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.0 (vd 1022:780b) Attempting to map option rom on dev 00:14.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.2 (vd 1022:780d) Attempting to map option rom on dev 00:14.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.3 (vd 1022:780e) Attempting to map option rom on dev 00:14.3 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.4 (vd 1022:780f) Attempting to map option rom on dev 00:14.4 Skipping non-normal pci device (type=81) Attempting to init PCI bdf 00:14.5 (vd 1022:7809) Attempting to map option rom on dev 00:14.5 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.7 (vd 1022:7806) Attempting to map option rom on dev 00:14.7 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:15.0 (vd 1022:43a0) Attempting to map option rom on dev 00:15.0 Skipping non-normal pci device (type=81) Attempting to init PCI bdf 00:15.1 (vd 1022:43a1) Attempting to map option rom on dev 00:15.1 Skipping non-normal pci device (type=81) Attempting to init PCI bdf 00:18.0 (vd 1022:1400) Attempting to map option rom on dev 00:18.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.1 (vd 1022:1401) Attempting to map option rom on dev 00:18.1 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.2 (vd 1022:1402) Attempting to map option rom on dev 00:18.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.3 (vd 1022:1403) Attempting to map option rom on dev 00:18.3 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.4 (vd 1022:1404) Attempting to map option rom on dev 00:18.4 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.5 (vd 1022:1405) Attempting to map option rom on dev 00:18.5 Option rom sizing returned 0 0 Attempting to init PCI bdf 03:00.0 (vd 10ec:8168) Attempting to map option rom on dev 03:00.0 Option rom sizing returned 0 0 Press F12 for boot menu. Checking for bootsplash Select boot device: 1. AHCI/2: Maxtor 6L250S0 ATA-7 Hard-Disk (233 GiBytes) 2. AHCI/3: OCZ-VERTEX2 ATA-8 Hard-Disk (57241 MiBytes) Searching bootorder for: HALT Mapping hd drive 0x000f4680 to 0 drive 0x000f4680: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=117231408 Mapping hd drive 0x000f46d0 to 1 drive 0x000f46d0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=490234752 finalize PMM malloc finalize Add to e820 map: 0009fc00 00000400 2 Space available for UMB: d0000-ec000, f41d0-f4680 Add to e820 map: bf10f000 0000e000 1 Returned 57344 bytes of ZoneHigh e820 map has 7 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 00000000bf11d000 = 1 RAM 4: 00000000bf11d000 - 00000000e0000000 = 2 RESERVED 5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED 6: 0000000100000000 - 000000021f000000 = 1 RAM Jump to int19 enter handle_19: NULL Booting from Hard Disk... AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 0, count 1, buf 0x00007c00, rc 0 Booting from 0000:7c00 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1, count 1, buf 0x00000e00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2, count 1, buf 0x00001000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 22, count 1, buf 0x00007c00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 23, count 1, buf 0x00007e00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 24, count 1, buf 0x00008000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 25, count 1, buf 0x00008200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 26, count 1, buf 0x00008400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 27, count 1, buf 0x00008600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 28, count 1, buf 0x00008800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 29, count 1, buf 0x00008a00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2a, count 1, buf 0x00008c00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2b, count 1, buf 0x00008e00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2c, count 1, buf 0x00009000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2d, count 1, buf 0x00009200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2e, count 1, buf 0x00009400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2f, count 1, buf 0x00009600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 30, count 1, buf 0x00009800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 31, count 1, buf 0x00009a00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 32, count 1, buf 0x00009c00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 33, count 1, buf 0x00009e00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 34, count 1, buf 0x0000a000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 35, count 1, buf 0x0000a200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 36, count 1, buf 0x0000a400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 37, count 1, buf 0x0000a600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 38, count 1, buf 0x0000a800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 39, count 1, buf 0x0000aa00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 3a, count 1, buf 0x0000ac00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 3b, count 1, buf 0x0000ae00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 3c, count 1, buf 0x0000b000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 3d, count 1, buf 0x0000b200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 3e, count 1, buf 0x0000b400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 3f, count 1, buf 0x0000b600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 40, count 1, buf 0x0000b800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 41, count 1, buf 0x0000ba00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 42, count 1, buf 0x0000bc00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 43, count 1, buf 0x0000be00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 44, count 1, buf 0x0000c000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 45, count 1, buf 0x0000c200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 46, count 1, buf 0x0000c400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 47, count 1, buf 0x0000c600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 48, count 1, buf 0x0000c800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 49, count 1, buf 0x0000ca00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 4a, count 1, buf 0x0000cc00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 4b, count 1, buf 0x0000ce00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 4c, count 1, buf 0x0000d000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 4d, count 1, buf 0x0000d200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 4e, count 1, buf 0x0000d400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 4f, count 1, buf 0x0000d600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 50, count 1, buf 0x0000d800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 51, count 1, buf 0x0000da00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 52, count 1, buf 0x0000dc00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 53, count 1, buf 0x0000de00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 54, count 1, buf 0x0000e000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 55, count 1, buf 0x0000e200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 56, count 1, buf 0x0000e400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 57, count 1, buf 0x0000e600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 58, count 1, buf 0x0000e800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 59, count 1, buf 0x0000ea00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 5a, count 1, buf 0x0000ec00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 5b, count 1, buf 0x0000ee00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 5c, count 1, buf 0x0000f000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 5d, count 1, buf 0x0000f200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 5e, count 1, buf 0x0000f400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 5f, count 1, buf 0x0000f600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 60, count 1, buf 0x0000f800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 61, count 1, buf 0x0000fa00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 62, count 1, buf 0x0000fc00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 63, count 1, buf 0x0000fe00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 64, count 1, buf 0x00010000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 65, count 1, buf 0x00010200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 66, count 1, buf 0x00010400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 67, count 1, buf 0x00010600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 68, count 1, buf 0x00010800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 69, count 1, buf 0x00010a00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 6a, count 1, buf 0x00010c00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 6b, count 1, buf 0x00010e00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 6c, count 1, buf 0x00011000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 6d, count 1, buf 0x00011200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 6e, count 1, buf 0x00011400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 6f, count 1, buf 0x00011600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 70, count 1, buf 0x00011800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 71, count 1, buf 0x00011a00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 72, count 1, buf 0x00011c00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 73, count 1, buf 0x00011e00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 74, count 1, buf 0x00012000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 75, count 1, buf 0x00012200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 76, count 1, buf 0x00012400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 77, count 1, buf 0x00012600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 78, count 1, buf 0x00012800, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 79, count 1, buf 0x00012a00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 7a, count 1, buf 0x00012c00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 7b, count 1, buf 0x00012e00, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 7c, count 1, buf 0x00013000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 7d, count 1, buf 0x00013200, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 7e, count 1, buf 0x00013400, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 7f, count 1, buf 0x00013600, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 20, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 30, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 40, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 50, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 60, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 70, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 80, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 90, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba a0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba b0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba c0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba d0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba e0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba f0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 2, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8000a0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8000b0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8000c0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8000d0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8000e0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8000f0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800100, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800110, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800120, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800130, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800140, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800150, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800160, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800170, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800180, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800188, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800190, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800198, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001a0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001a8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001b0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001b8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001c0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001c8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001d0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001d8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001e0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001e8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001f0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8001f8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800200, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800208, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800210, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800218, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800220, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800228, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800230, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800238, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800240, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800248, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800250, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800258, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800260, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800268, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800270, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 800278, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 3, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 4, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 5, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 6, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 7, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 8, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 9, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba a, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba b, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba c, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba d, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba e, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba f, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 10, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 11, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 12, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 13, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 14, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 15, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 16, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 17, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 18, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 19, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1a, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1b, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1d, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1e, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1f, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 20, count 1, buf 0x00022000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 21, count 1, buf 0x00022000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 20, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 30, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 40, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 50, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 60, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 70, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 80, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 90, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba a0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba b0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba c0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba d0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba e0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba f0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1, count 1, buf 0x00022000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 0, count 1, buf 0x00022000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 820, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 830, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 840, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 850, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 860, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 870, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 880, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 890, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 8a0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 8b0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 8c0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 8d0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 8e0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 8f0, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49681e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49682e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49683e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49684e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49685e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49686e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49687e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49688e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c49689e, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c4968ae, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c4968be, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c4968ce, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c4968de, count 10, buf 0x00020000, rc 0 AHCI/2: send cmd ... AHCI/2: ... intbits 0x1, status 0x50 ... AHCI/2: ... finished, status 0x50, OK ahci disk read, lba 1c4968ee, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f60, count 4, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f58, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba dac4b0, count 2, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1e787e0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903fa8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 802208, count 1, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f58, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f50, count 4, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 802090, count 1, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903a88, count 3, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c9be40, count 6, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 802090, count 1, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903a88, count 3, buf 0x00020000, rc 0 handle_hwpic1 irq=1 handle_hwpic1 irq=1 handle_hwpic1 irq=1 handle_hwpic1 irq=1 handle_hwpic1 irq=1 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 802090, count 1, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903a88, count 3, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ef8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903ed8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c9be40, count 6, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f30, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f28, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f20, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903f18, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1903be0, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1902e08, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c9a7e8, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95668, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c954f8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95508, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95518, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95528, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95538, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95548, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95558, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95568, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95578, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95588, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95598, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95668, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c955a0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c955b0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c955c0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c955d0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c955e0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c955f0, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95600, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95610, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95620, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95630, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95640, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95650, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95660, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c95668, count 8, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c954b8, count 10, buf 0x00020000, rc 0 AHCI/3: send cmd ... AHCI/3: ... intbits 0x1, status 0x50 ... AHCI/3: ... finished, status 0x50, OK ahci disk read, lba 1c954c8, count 8, buf 0x00020000, rc 0

1 0

Re: [SeaBIOS] [PATCH v3 3/3] usb: add xhci support
by Gerd Hoffmann 27 Sep '13

27 Sep '13

Hi, > Booting an Asus F2A85-M, with CONFIG_DEBUG_LEVEL=7 and a keyboard > (Chesen PS/2-to-USB bridge) in one of its USB3 ports: Two devices actually, one on each of the two xhci controllers. First control transfer fails for both devices: > |bf0fe000| xhci_trb_queue: ring 0xbf11e500 [nidx 1, len 8] > |bf0fe000| xhci_trb_queue: ring 0xbf11e500 [nidx 2, len 8] > |bf0fe000| xhci_trb_queue: ring 0xbf11e500 [nidx 3, len 0] > |bf0fe000| xhci_xfer_kick: ring 0xbf11e500, slotid 1, epid 1 > |bf0fb000| xhci_trb_queue: ring 0xbf11e300 [nidx 1, len 8] > |bf0fb000| xhci_trb_queue: ring 0xbf11e300 [nidx 2, len 8] > |bf0fb000| xhci_trb_queue: ring 0xbf11e300 [nidx 3, len 0] > |bf0fb000| xhci_xfer_kick: ring 0xbf11e300, slotid 1, epid 1 > |bf0fb000| xhci_control: control xfer failed (cc 6) cc 6 is "STALL ERROR" > |bf0fe000| WARNING - Timeout at xhci_event_wait:403! Probably there is something wrong with our control xfer trbs, which the qemu emulation is tolerant enough to accept but real hardware doesn't. cheers, Gerd

1 0

[PATCH] build: simplify cross builds
by Gerd Hoffmann 27 Sep '13

27 Sep '13

This patch simplifies seabios cross-builds on !x86 platforms. It adds a CROSS_PREFIX variable which is used to set CC, LD & friends to the cross build binaries. It also moves the common command definitions up in the Makefile to make sure CC is set correctly when probing compiler flags using $(call cc-option ...) Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> --- Makefile | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/Makefile b/Makefile index dd5230e..e801720 100644 --- a/Makefile +++ b/Makefile @@ -7,6 +7,24 @@ # Output directory OUT=out/ +# Common command definitions +export HOSTCC := $(CC) +export CONFIG_SHELL := sh +export KCONFIG_AUTOHEADER := autoconf.h +export KCONFIG_CONFIG := $(abspath $(OUT))/.config +CROSS_PREFIX= +ifneq ($(CROSS_PREFIX),) +CC=$(CROSS_PREFIX)gcc +endif +AS=$(CROSS_PREFIX)as +LD=$(CROSS_PREFIX)ld +OBJCOPY=$(CROSS_PREFIX)objcopy +OBJDUMP=$(CROSS_PREFIX)objdump +STRIP=$(CROSS_PREFIX)strip +PYTHON=python +CPP=cpp +IASL:=iasl + # Source files SRCBOTH=misc.c stacks.c output.c string.c x86.c block.c cdrom.c mouse.c kbd.c \ serial.c clock.c resume.c pnpbios.c vgahooks.c pcibios.c apm.c \ @@ -61,19 +79,6 @@ Q=@ MAKEFLAGS += --no-print-directory endif -# Common command definitions -export HOSTCC := $(CC) -export CONFIG_SHELL := sh -export KCONFIG_AUTOHEADER := autoconf.h -export KCONFIG_CONFIG := $(abspath $(OUT))/.config -AS=as -OBJCOPY=objcopy -OBJDUMP=objdump -STRIP=strip -PYTHON=python -CPP=cpp -IASL:=iasl - # Default targets -include $(KCONFIG_CONFIG) -- 1.8.3.1

1 1

1.7.3.2 stable release planned
by Gerd Hoffmann 27 Sep '13

27 Sep '13

Hi, I plan to build the next release for the 1.7.2-stable branch, probably later this week or early next week. Three patches have been cherry-picked into the branch since 1.7.2.1 has been released: # git shortlog rel-1.7.3.1.. Gerd Hoffmann (3): apm: fix shutdown ahci: add missing check for allocation failure fix buildversion.sh Any other important fixes which should go into the next stable release? cheers, Gerd

2 3

Support for IPMI System Boot Options commands
by Paulo 25 Sep '13

25 Sep '13

Hi, I´m a newbie with respect to using CoreBoot and the seaBIOS payload. Can someone inform if SeaBIOS has support for IPMI System Boot Options commands ? Rgds, http://www.padtec.com.br/imagens/logo_mail.png http://www.padtec.com.br/imagens/seta_mail.png Paulo Roberto F. de A. Luz Technology Engineer Embedded Platform <mailto:sania.campos@padtec.com.br> paulo.luz(a)padtec.com.br pluzluz,paulo +55 19 2104 0426 / 9191 1402 <http://www.padtec.com/> www.padtec.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Esta mensagem e seus anexos contêm informações confidenciais direcionadas exclusivamente a seus destinatários. Por favor, não a encaminhe ou remeta a terceiros. Caso tenha recebido este e-mail por engano informe-nos imediatamente respondendo ao mesmo e em seguida apague-o de seu sistema. This message and any attachment to it contains confidential information exclusively for the recipients. Please do not forward or distribute it to anyone else. If you have received this e-mail in error, please inform us immediately by answering it and then delete this message from your system. Este mensaje y cualquier anexo a él contienen información confidencial exclusivamente para los destinatarios. Por favor no distribuir o reenviar a cualquier persona. Si usted ha recibido este e-mail por error, infórmenos inmediatamente contestandolo y después suprima este mensaje de su sistema * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

1 0

[PATCH v4 0/5] seabios: load acpi tables from qemu
by Michael S. Tsirkin 25 Sep '13

25 Sep '13

This is the seabios code that adds support for loading acpi tables from QEMU. Changes from v3: - updated to latest bits - add option to disable loading from QEMU Changes from v2: - addressed comments from Kevin: fixed coding style, minimized changes to existing code Changes from v1: - simplified linker interfaces along the lines suggested by Kevin - fixed lots of bugs Michael S. Tsirkin (5): romfile_loader: utility to patch in-memory ROM files pmm: support looking up a given pattern in FSEG acpi: pack rsdp acpi: load and link tables through romfile loader acpi: add an option to disable builtin tables Makefile | 2 +- src/malloc.h | 1 + src/romfile_loader.h | 72 +++++++++++++++++++++ src/std/acpi.h | 2 +- src/fw/acpi.c | 30 +++++++++ src/fw/paravirt.c | 2 + src/malloc.c | 20 +++++- src/romfile_loader.c | 176 +++++++++++++++++++++++++++++++++++++++++++++++++++ src/Kconfig | 22 ++++++- 9 files changed, 323 insertions(+), 4 deletions(-) create mode 100644 src/romfile_loader.h create mode 100644 src/romfile_loader.c -- MST

3 33

[PATCH] build: explicitly set rom size
by Gerd Hoffmann 25 Sep '13

25 Sep '13

Add a config option to specify the rom size wanted. Default is zero, which will automatically figure the needed size. Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> --- Makefile | 3 ++- scripts/checkrom.py | 21 +++++++++++++++------ src/Kconfig | 11 +++++++++++ 3 files changed, 28 insertions(+), 7 deletions(-) diff --git a/Makefile b/Makefile index 229fe54..cdda3d5 100644 --- a/Makefile +++ b/Makefile @@ -178,7 +178,8 @@ $(OUT)bios.bin.elf $(OUT)bios.bin: $(OUT)rom.o scripts/checkrom.py @echo " Prepping $@" $(Q)$(OBJDUMP) -thr $< > $<.objdump $(Q)$(OBJCOPY) -O binary $< $(OUT)bios.bin.raw - $(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(OUT)bios.bin.raw $(OUT)bios.bin + $(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(CONFIG_ROM_SIZE) \ + $(OUT)bios.bin.raw $(OUT)bios.bin $(Q)$(STRIP) -R .comment $< -o $(OUT)bios.bin.elf diff --git a/scripts/checkrom.py b/scripts/checkrom.py index 6f07ac8..aa3dd0d 100755 --- a/scripts/checkrom.py +++ b/scripts/checkrom.py @@ -21,7 +21,7 @@ def checksum(data, start, size, csum): def main(): # Get args - objinfo, rawfile, outfile = sys.argv[1:] + objinfo, finalsize, rawfile, outfile = sys.argv[1:] # Read in symbols objinfofile = open(objinfo, 'rb') @@ -32,11 +32,20 @@ def main(): rawdata = f.read() f.close() datasize = len(rawdata) - finalsize = 64*1024 - if datasize > 64*1024: - finalsize = 128*1024 - if datasize > 128*1024: - finalsize = 256*1024 + finalsize = int(finalsize) * 1024 + if finalsize == 0: + finalsize = 64*1024 + if datasize > 64*1024: + finalsize = 128*1024 + if datasize > 128*1024: + finalsize = 256*1024 + if datasize > finalsize: + print "Error! ROM doesn't fit (%d > %d)" % (datasize, finalsize) + print " You have to either increate the size (CONFIG_ROM_SIZE)" + print " or turn off some features (such as hardware support not" + print " needed) to make it fit. Trying a more recent gcc version" + print " might work too." + sys.exit(1) # Sanity checks start = symbols['code32flat_start'].offset diff --git a/src/Kconfig b/src/Kconfig index c40cc61..00a6840 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -122,6 +122,17 @@ endchoice selected, the memory is instead allocated from the "9-segment" (0x90000-0xa0000). + config ROM_SIZE + int "ROM size (in kB)" + default 0 + help + Set the rom size. Say '0' here to make seabios figure the + needed size automatically. + + Currently SeaBIOS will easily fit into 256k. To make it fit + it into 128k (which was big enougth for a long time) you'll + probably have to disable some featues. + endmenu menu "Hardware support" -- 1.8.3.1

1 0

[PATCH] build: explicitly set rom size
by Gerd Hoffmann 24 Sep '13

24 Sep '13

Replace the automatic rom sizing with an explicit kconfig option. ROM changing size is a problem for qemu live migration, therefore an explicit size is prefered. Make the default rom size 256k, with the recent xhci support merge seabios doesn't fit into 128k any more. Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> --- Makefile | 3 ++- scripts/checkrom.py | 15 +++++++++------ src/Kconfig | 8 ++++++++ 3 files changed, 19 insertions(+), 7 deletions(-) diff --git a/Makefile b/Makefile index e801720..c8bed85 100644 --- a/Makefile +++ b/Makefile @@ -178,7 +178,8 @@ $(OUT)bios.bin.elf $(OUT)bios.bin: $(OUT)rom.o scripts/checkrom.py @echo " Prepping $@" $(Q)$(OBJDUMP) -thr $< > $<.objdump $(Q)$(OBJCOPY) -O binary $< $(OUT)bios.bin.raw - $(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(OUT)bios.bin.raw $(OUT)bios.bin + $(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(CONFIG_ROM_SIZE) \ + $(OUT)bios.bin.raw $(OUT)bios.bin $(Q)$(STRIP) -R .comment $< -o $(OUT)bios.bin.elf diff --git a/scripts/checkrom.py b/scripts/checkrom.py index 6f07ac8..0ef7299 100755 --- a/scripts/checkrom.py +++ b/scripts/checkrom.py @@ -21,7 +21,7 @@ def checksum(data, start, size, csum): def main(): # Get args - objinfo, rawfile, outfile = sys.argv[1:] + objinfo, finalsize, rawfile, outfile = sys.argv[1:] # Read in symbols objinfofile = open(objinfo, 'rb') @@ -32,11 +32,14 @@ def main(): rawdata = f.read() f.close() datasize = len(rawdata) - finalsize = 64*1024 - if datasize > 64*1024: - finalsize = 128*1024 - if datasize > 128*1024: - finalsize = 256*1024 + finalsize = int(finalsize) * 1024 + if datasize > finalsize: + print "Error! ROM doesn't fit (%d > %d)" % (datasize, finalsize) + print " You have to either increate the size (CONFIG_ROM_SIZE)" + print " or turn off some features (such as hardware support not" + print " needed) to make it fit. Trying a more recent gcc version" + print " might work too." + sys.exit(1) # Sanity checks start = symbols['code32flat_start'].offset diff --git a/src/Kconfig b/src/Kconfig index c40cc61..dde9b7c 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -122,6 +122,14 @@ endchoice selected, the memory is instead allocated from the "9-segment" (0x90000-0xa0000). + config ROM_SIZE + int "ROM size (in kB)" + default 256 + help + Set the rom size. Currently SeaBIOS will easily fit into 256k. + To make it fit it into 128k (which was big enougth for a long + time) you'll probably have to disable some featues. + endmenu menu "Hardware support" -- 1.8.3.1

3 2

[PATCH] build: move .config to $(OUT)
by Gerd Hoffmann 24 Sep '13

24 Sep '13

Place the .config file in the output directory. This makes it easier to have multiple output directories with different configurations as "make OUT=out-${config}/" will automatically switch to the correct configuration. It also allows to do parallel builds of different configurations. To simplify transition copy over the .config file in case there is one at the old location but not at the new location. Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> --- Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 3984d35..dd5230e 100644 --- a/Makefile +++ b/Makefile @@ -65,7 +65,7 @@ endif export HOSTCC := $(CC) export CONFIG_SHELL := sh export KCONFIG_AUTOHEADER := autoconf.h -export KCONFIG_CONFIG := $(CURDIR)/.config +export KCONFIG_CONFIG := $(abspath $(OUT))/.config AS=as OBJCOPY=objcopy OBJDUMP=objdump @@ -233,6 +233,7 @@ $(OUT)src/fw/acpi.o: $(OUT)src/fw/acpi-dsdt.hex $(OUT)src/fw/ssdt-proc.hex $(OUT define do-kconfig $(Q)mkdir -p $(OUT)/scripts/kconfig/lxdialog $(Q)mkdir -p $(OUT)/include/config +$(Q)if test -f $(CURDIR)/.config -a ! -f $(KCONFIG_CONFIG); then cp -v $(CURDIR)/.config $(KCONFIG_CONFIG); fi $(Q)$(MAKE) -C $(OUT) -f $(CURDIR)/scripts/kconfig/Makefile srctree=$(CURDIR) src=scripts/kconfig obj=scripts/kconfig Q=$(Q) Kconfig=$(CURDIR)/src/Kconfig $1 endef -- 1.8.3.1

2 1

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS September 2013