February 2018 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Feb 1 10:22:51 CET 2018
Ending: Tue Feb 27 22:00:55 CET 2018
Messages: 138

• [SeaBIOS] coreboot: modifying seabios bootenter list dynamically   Gerd Hoffmann
• [SeaBIOS] Fwd: Re: coreboot: modifying seabios bootenter list dynamically   Francesco Lucconi
• [SeaBIOS] [PATCH] Fixes to the floppy driver, so it works on real (not emulated) hardware   Nikolay Nikolov
  • [SeaBIOS] [PATCH] Fixes to the floppy driver, so it works on real (not emulated) hardware   Nikolay Nikolov
  • [SeaBIOS] [PATCH] Fixes to the floppy driver, so it works on real (not emulated) hardware   Nikolay Nikolov
• [SeaBIOS] [PATCH 1/6] Introduce floppy_dor_mask()   Nikolay Nikolov
  • [SeaBIOS] [PATCH 3/6] Preserve the motor and drive sel bits when resetting the floppy controller   Nikolay Nikolov
  • [SeaBIOS] [PATCH 4/6] Move the code that turns on the floppy motor to floppy_turn_on_motor()   Nikolay Nikolov
  • [SeaBIOS] [PATCH 5/6] Introduce floppy_turn_off_motor_delayed() to keep the motor spinning for 2 seconds after the end of a floppy operation   Nikolay Nikolov
  • [SeaBIOS] [PATCH 6/6] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()   Nikolay Nikolov
  • [SeaBIOS] [PATCH 1/6] Introduce floppy_dor_mask()   Nikolay Nikolov
• [SeaBIOS] [PATCH 2/6] Introduce FLOPPY_DOR_XXX constants   Nikolay Nikolov
• [SeaBIOS] [PATCH 1/7] Introduce the floppy_dor_read() function   Nikolay Nikolov
  • [SeaBIOS] [PATCH 2/7] Introduce floppy_dor_mask()   Nikolay Nikolov
  • [SeaBIOS] [PATCH 3/7] Introduce FLOPPY_DOR_XXX constants   Nikolay Nikolov
  • [SeaBIOS] [PATCH 4/7] Preserve the motor and drive sel bits when resetting the floppy controller   Nikolay Nikolov
  • [SeaBIOS] [PATCH 5/7] Move the code that turns on the floppy motor to floppy_turn_on_motor()   Nikolay Nikolov
    • [SeaBIOS] [PATCH 5/7] Move the code that turns on the floppy motor to floppy_turn_on_motor()   Kevin O'Connor
      • [SeaBIOS] [PATCH 5/7] Move the code that turns on the floppy motor to floppy_turn_on_motor()   Nikolay Nikolov
  • [SeaBIOS] [PATCH 6/7] Introduce floppy_turn_off_motor_delayed() to keep the motor spinning for 2 seconds after the end of a floppy operation   Nikolay Nikolov
  • [SeaBIOS] [PATCH 7/7] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()   Nikolay Nikolov
    • [SeaBIOS] [PATCH 7/7] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()   Kevin O'Connor
      • [SeaBIOS] [PATCH 7/7] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()   Nikolay Nikolov
• [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function   Nikolay Nikolov
  • [SeaBIOS] [PATCH 3/6] Introduce FLOPPY_DOR_XXX constants   Nikolay Nikolov
  • [SeaBIOS] [PATCH 4/6] Preserve the motor and drive sel bits when resetting the floppy controller   Nikolay Nikolov
  • [SeaBIOS] [PATCH 5/6] Reset the floppy motor count, so the motor keeps spinning 2 seconds after a floppy operation, performed by floppy_drive_pio()   Nikolay Nikolov
    • [SeaBIOS] [PATCH 5/6] Reset the floppy motor count, so the motor keeps spinning 2 seconds after a floppy operation, performed by floppy_drive_pio()   Nikolay Nikolov
  • [SeaBIOS] [PATCH 6/6] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()   Nikolay Nikolov
    • [SeaBIOS] [PATCH 6/6] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()   Nikolay Nikolov
  • [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function   Kevin O'Connor
  • [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function   Kevin O'Connor
    • [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function   Nikolay Nikolov
• [SeaBIOS] [PATCH 2/6] Introduce floppy_dor_mask()   Nikolay Nikolov
• [SeaBIOS] [Question] Debug Seabios by GDB with Qemu   Liu, Jing2
  • [SeaBIOS] [Question] Debug Seabios by GDB with Qemu   Liu, Jing2
  • [SeaBIOS] [Question] Debug Seabios by GDB with Qemu   Kevin O'Connor
• [SeaBIOS] reboot fails with QEMU "isapc" machine type   Daniel P. Berrangé
  • [SeaBIOS] reboot fails with QEMU "isapc" machine type   Kevin O'Connor
    • [SeaBIOS] reboot fails with QEMU "isapc" machine type   Daniel P. Berrangé
  • [SeaBIOS] reboot fails with QEMU "isapc" machine type   Kevin O'Connor
    • [SeaBIOS] reboot fails with QEMU "isapc" machine type   Daniel P. Berrangé
      • [SeaBIOS] reboot fails with QEMU "isapc" machine type   Kevin O'Connor
• [SeaBIOS] Failure to detect high-capacity SD card   Chris
  • [SeaBIOS] Failure to detect high-capacity SD card   Paul Menzel
  • [SeaBIOS] Failure to detect high-capacity SD card   Kevin O'Connor
    • [SeaBIOS] Failure to detect high-capacity SD card   Chris
      • [SeaBIOS] Failure to detect high-capacity SD card   Kevin O'Connor
      • [SeaBIOS] Failure to detect high-capacity SD card   Chris
      • [SeaBIOS] Failure to detect high-capacity SD card   Paul Menzel
      • [SeaBIOS] Failure to detect high-capacity SD card   Kevin O'Connor
      • [SeaBIOS] Failure to detect high-capacity SD card   Chris
• [SeaBIOS] Saving a few bytes across a reboot   Stefan Berger
  • [SeaBIOS] Saving a few bytes across a reboot   Laszlo Ersek
    • [SeaBIOS] Saving a few bytes across a reboot   Stefan Berger
      • [SeaBIOS] Saving a few bytes across a reboot   Laszlo Ersek
      • [SeaBIOS] Saving a few bytes across a reboot   Stefan Berger
      • [SeaBIOS] Saving a few bytes across a reboot   Laszlo Ersek
      • [SeaBIOS] Saving a few bytes across a reboot   Marc-André Lureau
      • [SeaBIOS] Saving a few bytes across a reboot   Laszlo Ersek
      • [SeaBIOS] Saving a few bytes across a reboot   Stefan Berger
      • [SeaBIOS] Saving a few bytes across a reboot   Marc-André Lureau
      • [SeaBIOS] Saving a few bytes across a reboot   Stefan Berger
  • [SeaBIOS] Saving a few bytes across a reboot   Igor Mammedov
    • [SeaBIOS] Saving a few bytes across a reboot   Laszlo Ersek
• [SeaBIOS] [PATCH 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting the floppy controller   Nikolay Nikolov
  • [SeaBIOS] [PATCH 2/5] floppy: Execute a SPECIFY command (sets the Step Rate Time, Head Load Time, Head Unload Time and the DMA enable/disable bit) after sensing the media type.   Nikolay Nikolov
  • [SeaBIOS] [PATCH 3/5] floppy: Support up to 4 floppy drives (instead of just 2) in the code, that turns on the floppy motor   Nikolay Nikolov
  • [SeaBIOS] [PATCH 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting   Nikolay Nikolov
    • [SeaBIOS] [PATCH 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting   Kevin O'Connor
      • [SeaBIOS] [PATCH 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting   Nikolay Nikolov
  • [SeaBIOS] [PATCH 5/5] floppy: Send 4 sense interrupt commands during controller initialization.   Nikolay Nikolov
  • [SeaBIOS] [PATCH 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting the floppy controller   Nikolay Nikolov
• [SeaBIOS] [PATCH v2 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting   Nikolay Nikolov
  • [SeaBIOS] [PATCH v2 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting   Nikolay Nikolov
  • [SeaBIOS] [PATCH v2 5/5] floppy: Send 4 sense interrupt commands during controller initialization   Nikolay Nikolov
  • [SeaBIOS] [PATCH v2 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting   Kevin O'Connor
  • [SeaBIOS] [PATCH v2 3/5] floppy: Support up to 4 floppy drives when turning on the floppy motor   Nikolay Nikolov
  • [SeaBIOS] [PATCH v2 2/5] floppy: Execute a SPECIFY command after sensing the media type   Nikolay Nikolov
• [SeaBIOS] [PATCH 0/4] RFC: add CRB TPM device   Stefan Berger
  • [SeaBIOS] [PATCH 0/4] RFC: add CRB TPM device   Marc-Andre Lureau
  • [SeaBIOS] [PATCH 0/4] RFC: add CRB TPM device   Stefan Berger
• [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device   Stefan Berger
  • [SeaBIOS] [PATCH v2 1/4] x86: add readq()   Stefan Berger
  • [SeaBIOS] [PATCH v2 2/4] tpm: generalize init_timeout()   Stefan Berger
  • [SeaBIOS] [PATCH v2 3/4] tpm: use get_tpm_version() callback   Stefan Berger
  • [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support   Stefan Berger
    • [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support   Kevin O'Connor
      • [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support   Stefan Berger
  • [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device   Marc-Andre Lureau
  • [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device   Stefan Berger
    • [SeaBIOS] [PATCH v2 1/4] x86: add readq()   Stefan Berger
    • [SeaBIOS] [PATCH v2 2/4] tpm: generalize init_timeout()   Stefan Berger
    • [SeaBIOS] [PATCH v2 3/4] tpm: use get_tpm_version() callback   Stefan Berger
    • [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support   Stefan Berger
    • [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device   Stefan Berger
    • [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device   Kevin O'Connor
• [SeaBIOS] Confirm the status about BZ#1377575   Shouta.Uehara at jp.yokogawa.com
  • [SeaBIOS] Confirm the status about BZ#1377575   Igor Skochinsky
  • [SeaBIOS] Confirm the status about BZ#1377575   Laszlo Ersek
    • [SeaBIOS] Confirm the status about BZ#1377575   Shouta.Uehara at jp.yokogawa.com
• [SeaBIOS] Bug report for 'vga none' qemu option not working any more   Sergey Aleynikov
• [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS   Mike Banon
  • [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS   Paul Menzel
    • [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS   Mike Banon
  • [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS   Kevin O'Connor
    • [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS   Mike Banon
      • [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS   Kevin O'Connor
• [SeaBIOS] [PATCH 1/2] floppy: Introduce the floppy_clear_irq_flag() function   Nikolay Nikolov
  • [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset   Nikolay Nikolov
    • [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset   Kevin O'Connor
      • [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset   Nikolay Nikolov
      • [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset   Kevin O'Connor
• [SeaBIOS] [PATCH 0/3] Support TPM2.0 devices on TIS host   Stephen Douthit
  • [SeaBIOS] [PATCH 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()   Stephen Douthit
  • [SeaBIOS] [PATCH 2/3] tpm: Wait for interface startup when probing   Stephen Douthit
  • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stephen Douthit
• [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stefan Berger
  • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stephen Douthit
  • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stefan Berger
    • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stephen Douthit
    • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stefan Berger
      • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stephen Douthit
      • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stefan Berger
      • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stephen Douthit
      • [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stefan Berger
• [SeaBIOS] [PATCH 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()   Stefan Berger
  • [SeaBIOS] [PATCH 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()   Stephen Douthit
• [SeaBIOS] [PATCH 2/3] tpm: Wait for interface startup when probing   Stefan Berger
• [SeaBIOS] [PATCH v1 0/3] tpm: Support 2.0 TPM devices connected to a TIS host   Stephen Douthit
  • [SeaBIOS] [PATCH v1 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()   Stephen Douthit
    • [SeaBIOS] [PATCH v1 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()   Stefan Berger
  • [SeaBIOS] [PATCH v1 2/3] tpm: Wait for interface startup when probing   Stephen Douthit
    • [SeaBIOS] [PATCH v1 2/3] tpm: Wait for interface startup when probing   Stefan Berger
  • [SeaBIOS] [PATCH v1 3/3] tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()   Stephen Douthit
    • [SeaBIOS] [PATCH v1 3/3] tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()   Stefan Berger

Last message date: Tue Feb 27 22:00:55 CET 2018
Archived on: Tue Feb 27 22:02:57 CET 2018

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...