February 2018 Archives by subject
Starting: Thu Feb 1 10:22:51 CET 2018
Ending: Tue Feb 27 22:00:55 CET 2018
Messages: 138
- [SeaBIOS] [PATCH 0/3] Support TPM2.0 devices on TIS host
Stephen Douthit
- [SeaBIOS] [PATCH 0/4] RFC: add CRB TPM device
Stefan Berger
- [SeaBIOS] [PATCH 0/4] RFC: add CRB TPM device
Marc-Andre Lureau
- [SeaBIOS] [PATCH 0/4] RFC: add CRB TPM device
Stefan Berger
- [SeaBIOS] [PATCH 1/2] floppy: Introduce the floppy_clear_irq_flag() function
Nikolay Nikolov
- [SeaBIOS] [PATCH 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
Stephen Douthit
- [SeaBIOS] [PATCH 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
Stefan Berger
- [SeaBIOS] [PATCH 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
Stephen Douthit
- [SeaBIOS] [PATCH 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting the floppy controller
Nikolay Nikolov
- [SeaBIOS] [PATCH 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting the floppy controller
Nikolay Nikolov
- [SeaBIOS] [PATCH 1/6] Introduce floppy_dor_mask()
Nikolay Nikolov
- [SeaBIOS] [PATCH 1/6] Introduce floppy_dor_mask()
Nikolay Nikolov
- [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function
Nikolay Nikolov
- [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function
Kevin O'Connor
- [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function
Kevin O'Connor
- [SeaBIOS] [PATCH 1/6] Introduce the floppy_dor_read() function
Nikolay Nikolov
- [SeaBIOS] [PATCH 1/7] Introduce the floppy_dor_read() function
Nikolay Nikolov
- [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset
Nikolay Nikolov
- [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset
Kevin O'Connor
- [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset
Nikolay Nikolov
- [SeaBIOS] [PATCH 2/2] floppy: Clear the IRQ flag immediately before a floppy command or reset
Kevin O'Connor
- [SeaBIOS] [PATCH 2/3] tpm: Wait for interface startup when probing
Stephen Douthit
- [SeaBIOS] [PATCH 2/3] tpm: Wait for interface startup when probing
Stefan Berger
- [SeaBIOS] [PATCH 2/5] floppy: Execute a SPECIFY command (sets the Step Rate Time, Head Load Time, Head Unload Time and the DMA enable/disable bit) after sensing the media type.
Nikolay Nikolov
- [SeaBIOS] [PATCH 2/6] Introduce floppy_dor_mask()
Nikolay Nikolov
- [SeaBIOS] [PATCH 2/6] Introduce FLOPPY_DOR_XXX constants
Nikolay Nikolov
- [SeaBIOS] [PATCH 2/7] Introduce floppy_dor_mask()
Nikolay Nikolov
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stephen Douthit
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stefan Berger
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stephen Douthit
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stefan Berger
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stephen Douthit
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stefan Berger
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stephen Douthit
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stefan Berger
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stephen Douthit
- [SeaBIOS] [PATCH 3/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stefan Berger
- [SeaBIOS] [PATCH 3/5] floppy: Support up to 4 floppy drives (instead of just 2) in the code, that turns on the floppy motor
Nikolay Nikolov
- [SeaBIOS] [PATCH 3/6] Introduce FLOPPY_DOR_XXX constants
Nikolay Nikolov
- [SeaBIOS] [PATCH 3/6] Preserve the motor and drive sel bits when resetting the floppy controller
Nikolay Nikolov
- [SeaBIOS] [PATCH 3/7] Introduce FLOPPY_DOR_XXX constants
Nikolay Nikolov
- [SeaBIOS] [PATCH 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting
Nikolay Nikolov
- [SeaBIOS] [PATCH 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting
Kevin O'Connor
- [SeaBIOS] [PATCH 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting
Nikolay Nikolov
- [SeaBIOS] [PATCH 4/6] Move the code that turns on the floppy motor to floppy_turn_on_motor()
Nikolay Nikolov
- [SeaBIOS] [PATCH 4/6] Preserve the motor and drive sel bits when resetting the floppy controller
Nikolay Nikolov
- [SeaBIOS] [PATCH 4/7] Preserve the motor and drive sel bits when resetting the floppy controller
Nikolay Nikolov
- [SeaBIOS] [PATCH 5/5] floppy: Send 4 sense interrupt commands during controller initialization.
Nikolay Nikolov
- [SeaBIOS] [PATCH 5/6] Introduce floppy_turn_off_motor_delayed() to keep the motor spinning for 2 seconds after the end of a floppy operation
Nikolay Nikolov
- [SeaBIOS] [PATCH 5/6] Reset the floppy motor count, so the motor keeps spinning 2 seconds after a floppy operation, performed by floppy_drive_pio()
Nikolay Nikolov
- [SeaBIOS] [PATCH 5/6] Reset the floppy motor count, so the motor keeps spinning 2 seconds after a floppy operation, performed by floppy_drive_pio()
Nikolay Nikolov
- [SeaBIOS] [PATCH 5/7] Move the code that turns on the floppy motor to floppy_turn_on_motor()
Nikolay Nikolov
- [SeaBIOS] [PATCH 5/7] Move the code that turns on the floppy motor to floppy_turn_on_motor()
Kevin O'Connor
- [SeaBIOS] [PATCH 5/7] Move the code that turns on the floppy motor to floppy_turn_on_motor()
Nikolay Nikolov
- [SeaBIOS] [PATCH 6/6] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()
Nikolay Nikolov
- [SeaBIOS] [PATCH 6/6] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()
Nikolay Nikolov
- [SeaBIOS] [PATCH 6/6] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()
Nikolay Nikolov
- [SeaBIOS] [PATCH 6/7] Introduce floppy_turn_off_motor_delayed() to keep the motor spinning for 2 seconds after the end of a floppy operation
Nikolay Nikolov
- [SeaBIOS] [PATCH 7/7] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()
Nikolay Nikolov
- [SeaBIOS] [PATCH 7/7] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()
Kevin O'Connor
- [SeaBIOS] [PATCH 7/7] Use timer_check() instead of using floppy_motor_counter in BDA for the timeout check in floppy_wait_irq()
Nikolay Nikolov
- [SeaBIOS] [PATCH] Fixes to the floppy driver, so it works on real (not emulated) hardware
Nikolay Nikolov
- [SeaBIOS] [PATCH] Fixes to the floppy driver, so it works on real (not emulated) hardware
Nikolay Nikolov
- [SeaBIOS] [PATCH] Fixes to the floppy driver, so it works on real (not emulated) hardware
Nikolay Nikolov
- [SeaBIOS] [PATCH v1 0/3] tpm: Support 2.0 TPM devices connected to a TIS host
Stephen Douthit
- [SeaBIOS] [PATCH v1 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
Stephen Douthit
- [SeaBIOS] [PATCH v1 1/3] tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
Stefan Berger
- [SeaBIOS] [PATCH v1 2/3] tpm: Wait for interface startup when probing
Stephen Douthit
- [SeaBIOS] [PATCH v1 2/3] tpm: Wait for interface startup when probing
Stefan Berger
- [SeaBIOS] [PATCH v1 3/3] tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()
Stephen Douthit
- [SeaBIOS] [PATCH v1 3/3] tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()
Stefan Berger
- [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device
Stefan Berger
- [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device
Marc-Andre Lureau
- [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device
Stefan Berger
- [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device
Stefan Berger
- [SeaBIOS] [PATCH v2 0/4] Add CRB TPM device
Kevin O'Connor
- [SeaBIOS] [PATCH v2 1/4] x86: add readq()
Stefan Berger
- [SeaBIOS] [PATCH v2 1/4] x86: add readq()
Stefan Berger
- [SeaBIOS] [PATCH v2 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting
Nikolay Nikolov
- [SeaBIOS] [PATCH v2 1/5] floppy: hold the DOR reset bit low for 4 microseconds, when resetting
Kevin O'Connor
- [SeaBIOS] [PATCH v2 2/4] tpm: generalize init_timeout()
Stefan Berger
- [SeaBIOS] [PATCH v2 2/4] tpm: generalize init_timeout()
Stefan Berger
- [SeaBIOS] [PATCH v2 2/5] floppy: Execute a SPECIFY command after sensing the media type
Nikolay Nikolov
- [SeaBIOS] [PATCH v2 2/5] floppy: Execute a SPECIFY command after sensing the media type
Nikolay Nikolov
- [SeaBIOS] [PATCH v2 3/4] tpm: use get_tpm_version() callback
Stefan Berger
- [SeaBIOS] [PATCH v2 3/4] tpm: use get_tpm_version() callback
Stefan Berger
- [SeaBIOS] [PATCH v2 3/5] floppy: Support up to 4 floppy drives when turning on the floppy motor
Nikolay Nikolov
- [SeaBIOS] [PATCH v2 3/5] floppy: Support up to 4 floppy drives when turning on the floppy motor
Nikolay Nikolov
- [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support
Stefan Berger
- [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support
Kevin O'Connor
- [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support
Stefan Berger
- [SeaBIOS] [PATCH v2 4/4] tpm: add TPM CRB device support
Stefan Berger
- [SeaBIOS] [PATCH v2 4/5] floppy: Wait for the floppy motor to reach a stable speed, after starting
Nikolay Nikolov
- [SeaBIOS] [PATCH v2 5/5] floppy: Send 4 sense interrupt commands during controller initialization
Nikolay Nikolov
- [SeaBIOS] [Question] Debug Seabios by GDB with Qemu
Liu, Jing2
- [SeaBIOS] [Question] Debug Seabios by GDB with Qemu
Liu, Jing2
- [SeaBIOS] [Question] Debug Seabios by GDB with Qemu
Kevin O'Connor
- [SeaBIOS] Bug report for 'vga none' qemu option not working any more
Sergey Aleynikov
- [SeaBIOS] Confirm the status about BZ#1377575
Shouta.Uehara at jp.yokogawa.com
- [SeaBIOS] Confirm the status about BZ#1377575
Igor Skochinsky
- [SeaBIOS] Confirm the status about BZ#1377575
Laszlo Ersek
- [SeaBIOS] Confirm the status about BZ#1377575
Shouta.Uehara at jp.yokogawa.com
- [SeaBIOS] coreboot: modifying seabios bootenter list dynamically
Gerd Hoffmann
- [SeaBIOS] Failure to detect high-capacity SD card
Chris
- [SeaBIOS] Failure to detect high-capacity SD card
Paul Menzel
- [SeaBIOS] Failure to detect high-capacity SD card
Kevin O'Connor
- [SeaBIOS] Failure to detect high-capacity SD card
Chris
- [SeaBIOS] Failure to detect high-capacity SD card
Kevin O'Connor
- [SeaBIOS] Failure to detect high-capacity SD card
Chris
- [SeaBIOS] Failure to detect high-capacity SD card
Paul Menzel
- [SeaBIOS] Failure to detect high-capacity SD card
Kevin O'Connor
- [SeaBIOS] Failure to detect high-capacity SD card
Chris
- [SeaBIOS] Fwd: Re: coreboot: modifying seabios bootenter list dynamically
Francesco Lucconi
- [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS
Mike Banon
- [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS
Paul Menzel
- [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS
Mike Banon
- [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS
Kevin O'Connor
- [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS
Mike Banon
- [SeaBIOS] Mysterious "is VARVERIFY32INIT but used from" problem while trying to improve SeaBIOS
Kevin O'Connor
- [SeaBIOS] reboot fails with QEMU "isapc" machine type
Daniel P. Berrangé
- [SeaBIOS] reboot fails with QEMU "isapc" machine type
Kevin O'Connor
- [SeaBIOS] reboot fails with QEMU "isapc" machine type
Daniel P. Berrangé
- [SeaBIOS] reboot fails with QEMU "isapc" machine type
Kevin O'Connor
- [SeaBIOS] reboot fails with QEMU "isapc" machine type
Daniel P. Berrangé
- [SeaBIOS] reboot fails with QEMU "isapc" machine type
Kevin O'Connor
- [SeaBIOS] Saving a few bytes across a reboot
Stefan Berger
- [SeaBIOS] Saving a few bytes across a reboot
Laszlo Ersek
- [SeaBIOS] Saving a few bytes across a reboot
Stefan Berger
- [SeaBIOS] Saving a few bytes across a reboot
Igor Mammedov
- [SeaBIOS] Saving a few bytes across a reboot
Laszlo Ersek
- [SeaBIOS] Saving a few bytes across a reboot
Laszlo Ersek
- [SeaBIOS] Saving a few bytes across a reboot
Stefan Berger
- [SeaBIOS] Saving a few bytes across a reboot
Laszlo Ersek
- [SeaBIOS] Saving a few bytes across a reboot
Marc-André Lureau
- [SeaBIOS] Saving a few bytes across a reboot
Laszlo Ersek
- [SeaBIOS] Saving a few bytes across a reboot
Stefan Berger
- [SeaBIOS] Saving a few bytes across a reboot
Marc-André Lureau
- [SeaBIOS] Saving a few bytes across a reboot
Stefan Berger
Last message date:
Tue Feb 27 22:00:55 CET 2018
Archived on: Tue Feb 27 22:02:57 CET 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).