July 2011 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jul 3 00:45:52 CEST 2011
Ending: Sat Jul 30 01:23:23 CEST 2011
Messages: 166

• [SeaBIOS] [PATCH 0/4] More 'struct pci' enhancements   Kevin O'Connor
• [SeaBIOS] [PATCH 0/5] pci: two-pass initialization   Gerd Hoffmann
• [SeaBIOS] [PATCH 0/5] pci: two-pass initialization   Kevin O'Connor
• [SeaBIOS] [PATCH 0/7] ahci update   Gerd Hoffmann
• [SeaBIOS] [PATCH 0/7] ahci update   Kevin O'Connor
• [SeaBIOS] [PATCH 0/7] ahci update   Marc Jones
• [SeaBIOS] [PATCH 0/7] ahci update   Kevin O'Connor
• [SeaBIOS] [PATCH 0/7] ahci update   Gerd Hoffmann
• [SeaBIOS] [PATCH 0/7] ahci update   Kevin O'Connor
• [SeaBIOS] [PATCH 0/7] Convert boot priority code to use 'struct pci_device'.   Kevin O'Connor
• [SeaBIOS] [PATCH 0/8] SeaBIOS code to extract config parameters   Kevin O'Connor
• [SeaBIOS] [PATCH 1/2] Run option rom visible PMM code in 32bit mode instead of 16bit mode.   Kevin O'Connor
• [SeaBIOS] [PATCH 1/4] Calculate vgahook responses during setup instead of in 16bit code.   Kevin O'Connor
• [SeaBIOS] [PATCH 1/4] pci: add two-pass pci initialization code   Kevin O'Connor
• [SeaBIOS] [PATCH 1/4] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH 1/5] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH 1/7] ahci/sata: Fix FIS setup.   Gerd Hoffmann
• [SeaBIOS] [PATCH 1/7] Push 'struct pci_device' into USB code (instead of using u16 bdf).   Kevin O'Connor
• [SeaBIOS] [PATCH 1/8] Add "romfile" code to assist with extract integer config settings.   Kevin O'Connor
• [SeaBIOS] [PATCH 1/8] Add "romfile" code to assist with extract integer config settings.   Wayne Xia
• [SeaBIOS] [PATCH 2/2] Remove 16bit wrappers from PMM code.   Kevin O'Connor
• [SeaBIOS] [PATCH 2/4] Convert pci_find_device/class to use 'struct pci_device'.   Kevin O'Connor
• [SeaBIOS] [PATCH 2/5] pci: activate two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH 2/7] ahci: use interrupt status register   Gerd Hoffmann
• [SeaBIOS] [PATCH 2/7] Push use of 'struct pci_device' to bootprio_find_usb().   Kevin O'Connor
• [SeaBIOS] [PATCH 2/8] Replace CONFIG_BOOTMENU_WAIT with dynamic "etc/boot-menu-wait" file.   Kevin O'Connor
• [SeaBIOS] [PATCH 3/4] Convert remaining callers of foreachbdf to foreachbdf_in_bus.   Kevin O'Connor
• [SeaBIOS] [PATCH 3/5] pci: remove old pci initilaization code   Gerd Hoffmann
• [SeaBIOS] [PATCH 3/7] ahci: add error recovery code   Gerd Hoffmann
• [SeaBIOS] [PATCH 3/7] Push use of 'struct pci_device' to bootprio_find_pci_device().   Kevin O'Connor
• [SeaBIOS] [PATCH 3/8] Replace CONFIG_EXTRA_PCI_ROOTS with dynamic "etc/extra-pci-roots" file.   Kevin O'Connor
• [SeaBIOS] [PATCH 4/4] Rename foreachbdf_in_bus to foreachbdf and simplify it.   Kevin O'Connor
• [SeaBIOS] [PATCH 4/5] pci: cleanup config.h   Gerd Hoffmann
• [SeaBIOS] [PATCH 4/7] ahci: handle unaligned buffers.   Gerd Hoffmann
• [SeaBIOS] [PATCH 4/7] Push use of 'struct pci_device' to bootprio_find_fdc_device().   Kevin O'Connor
• [SeaBIOS] [PATCH 4/8] Replace CONFIG_PS2_KEYBOARD_SPINUP with "etc/ps2-keyboard-spinup" file.   Kevin O'Connor
• [SeaBIOS] [PATCH 5/5] pci: set BUILD_PCIMEM_START to 0xe0000000   Gerd Hoffmann
• [SeaBIOS] [PATCH 5/5] pci: set BUILD_PCIMEM_START to 0xe0000000   Kevin O'Connor
• [SeaBIOS] [PATCH 5/5] pci: set BUILD_PCIMEM_START to 0xe0000000   Gerd Hoffmann
• [SeaBIOS] [PATCH 5/7] ahci: don't expect ATA_CB_STAT_DRQ being clear   Gerd Hoffmann
• [SeaBIOS] [PATCH 5/7] Push use of 'struct pci_device' to bootprio_find_ata_device().   Kevin O'Connor
• [SeaBIOS] [PATCH 5/8] Replace "CONFIG_OPTIONROMS_CHECKSUM" with "etc/optionroms-checksum" file.   Kevin O'Connor
• [SeaBIOS] [PATCH 6/7] ahci: rework init workflow & fix timeout handling   Gerd Hoffmann
• [SeaBIOS] [PATCH 6/7] Push use of 'struct pci_device' to bootprio_find_pci_rom().   Kevin O'Connor
• [SeaBIOS] [PATCH 6/8] Replace CONFIG_S3_RESUME_VGA_INIT with "etc/s3-resume-vga-init" file.   Kevin O'Connor
• [SeaBIOS] [PATCH 7/7] ahci: bootprio support   Gerd Hoffmann
• [SeaBIOS] [PATCH 7/7] Remove now unneeded find_pci().   Kevin O'Connor
• [SeaBIOS] [PATCH 7/8] Replace CONFIG_SCREEN_AND_DEBUG with "etc/screen-and-debug" file.   Kevin O'Connor
• [SeaBIOS] [PATCH 8/8] Add utility "tools/encodeint.py" for CBFS config file creation.   Kevin O'Connor
• [SeaBIOS] [PATCH] Ctrl-Break support (INT 1B, etc)   Nikolay Nikolov
• [SeaBIOS] [PATCH] Ctrl-Break support (INT 1B, etc)   Kevin O'Connor
• [SeaBIOS] [PATCH] Ctrl-Break support (INT 1B, etc)   Scott Duplichan
• [SeaBIOS] [PATCH] Ctrl-Break support (INT 1B, etc)   Kevin O'Connor
• [SeaBIOS] [PATCH] Ctrl-Break support (INT 1B, etc)   Nikolay Nikolov
• [SeaBIOS] [PATCH] Ctrl-Break support (INT 1B, etc)   Kevin O'Connor
• [SeaBIOS] [PATCH] Extend tools/readserial.py to support serial port timing calibration.   Kevin O'Connor
• [SeaBIOS] [PATCH] Extend tools/readserial.py to support serial port timing calibration.   Scott Duplichan
• [SeaBIOS] [PATCH] Extend tools/readserial.py to support serial port timing calibration.   Kevin O'Connor
• [SeaBIOS] [PATCH] Extend tools/readserial.py to support serial port timing calibration.   Kevin O'Connor
• [SeaBIOS] [PATCH] Extend tools/readserial.py to support serial port timing calibration.   Kevin O'Connor
• [SeaBIOS] [PATCH] Fix compilation errors/warnings   Stefan Berger
• [SeaBIOS] [PATCH] Fix compilation errors/warnings   Kevin O'Connor
• [SeaBIOS] [PATCH] Fix serial port flushing code.   Kevin O'Connor
• [SeaBIOS] [PATCH] pci: capability scanning function   Michael S. Tsirkin
• [SeaBIOS] [PATCH] pci: capability scanning function'   Michael S. Tsirkin
• [SeaBIOS] [PATCH] pci: capability scanning function'   Gerd Hoffmann
• [SeaBIOS] [PATCH] pci: capability scanning function'   Michael S. Tsirkin
• [SeaBIOS] [PATCH] pci: capability scanning function'   Gerd Hoffmann
• [SeaBIOS] [PATCH] pci: capability scanning function'   Michael S. Tsirkin
• [SeaBIOS] [PATCH] Replace CONFIG_PCI_ROOT1/2 with CONFIG_EXTRA_PCI_ROOTS.   Kevin O'Connor
• [SeaBIOS] [PATCH] seabios: increase smp_mtrr array size   Marcelo Tosatti
• [SeaBIOS] [PATCH] seabios: increase smp_mtrr array size   Kevin O'Connor
• [SeaBIOS] [PATCH] Simplify POST entry code by moving reboot logic from post.c to resume.c.   Kevin O'Connor
• [SeaBIOS] [PATCH] xen: actually setup hypercalls.   Ian Campbell
• [SeaBIOS] [PATCH] xen: actually setup hypercalls.   Ian Campbell
• [SeaBIOS] [PATCH] xen: actually setup hypercalls.   Kevin O'Connor
• [SeaBIOS] [PATCH v2 0/2] Boot up with a splash picture configurable, testing about it   Kevin O'Connor
• [SeaBIOS] [PATCH v2 0/4] pci: two-pass initialization   Gerd Hoffmann
• [SeaBIOS] [PATCH v2 1/2] Boot up with a splash picture configurable   Kevin O'Connor
• [SeaBIOS] [PATCH v2 1/4] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v2 1/4] pci: add two-pass pci initialization code   Kevin O'Connor
• [SeaBIOS] [PATCH v2 2/4] pci: activate two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v2 3/4] pci: remove old pci initilaization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v2 4/4] pci: init boot devices only on address space shortage   Gerd Hoffmann
• [SeaBIOS] [PATCH v2] Fix serial port flushing code.   Kevin O'Connor
• [SeaBIOS] [PATCH v3 0/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v3 0/3] Boot up with a splash picture configurable   Kevin O'Connor
• [SeaBIOS] [PATCH v3 0/6] pci: two-pass initialization   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 1/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Michael S. Tsirkin
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Michael S. Tsirkin
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Michael S. Tsirkin
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Kevin O'Connor
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Michael S. Tsirkin
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 1/6] pci: add two-pass pci initializationcode   Scott Duplichan
• [SeaBIOS] [PATCH v3 2/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v3 2/6] pci: activate two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 2/6] pci: activate two-pass pci initialization code   Michael S. Tsirkin
• [SeaBIOS] [PATCH v3 2/6] pci: activate two-pass pci initialization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 3/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v3 3/3] Boot up with a splash picture configurable   Kevin O'Connor
• [SeaBIOS] [PATCH v3 3/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v3 3/6] pci: remove old pci initilaization code   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 4/6] pci: init boot devices only on address space shortage   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 4/6] pci: init boot devices only on address space shortage   Michael S. Tsirkin
• [SeaBIOS] [PATCH v3 4/6] pci: init boot devices only on address space shortage   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 4/6] pci: init boot devices only on address space shortage   Gleb Natapov
• [SeaBIOS] [PATCH v3 4/6] pci: init boot devices only on address space shortage   Michael S. Tsirkin
• [SeaBIOS] [PATCH v3 4/6] pci: init boot devices only on address space shortage   Gleb Natapov
• [SeaBIOS] [PATCH v3 5/6] pci: cleanup config.h   Gerd Hoffmann
• [SeaBIOS] [PATCH v3 6/6] pci: set BUILD_PCIMEM_START to 0xe0000000   Gerd Hoffmann
• [SeaBIOS] [PATCH v4 0/4] Boot up with a splash picture configurable   xiaxia347work
• [SeaBIOS] [PATCH v4 1/4] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v4 2/4] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v4 3/4] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v4 4/4] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v4 4/4] Boot up with a splash picture configurable   Kevin O'Connor
• [SeaBIOS] [PATCH v5 0/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH V5 0/9] Add TPM support to SeaBIOS   Stefan Berger
• [SeaBIOS] [PATCH V5 0/9] Add TPM support to SeaBIOS   Kevin O'Connor
• [SeaBIOS] [PATCH V5 0/9] Add TPM support to SeaBIOS   Stefan Berger
• [SeaBIOS] [PATCH V5 0/9] Add TPM support to SeaBIOS   Kevin O'Connor
• [SeaBIOS] [PATCH V5 0/9] Add TPM support to SeaBIOS   Stefan Berger
• [SeaBIOS] [PATCH v5 1/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH V5 1/9] Add an implementation of a TPM TIS driver   Stefan Berger
• [SeaBIOS] [PATCH v5 2/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH V5 2/9] Provide ACPI SSDT table for TPM device + S3 resume support   Stefan Berger
• [SeaBIOS] [PATCH v5 3/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH V5 3/9] Add public get_rsdp function   Stefan Berger
• [SeaBIOS] [PATCH V5 4/9] Implementation of the TCG BIOS extensions   Stefan Berger
• [SeaBIOS] [PATCH V5 5/9] Support for BIOS interrupt handler   Stefan Berger
• [SeaBIOS] [PATCH V5 6/9] Add measurement code to the BIOS   Stefan Berger
• [SeaBIOS] [PATCH V5 7/9] Add a menu for TPM control   Stefan Berger
• [SeaBIOS] [PATCH V5 8/9] Support for Qemu-provided measurements   Stefan Berger
• [SeaBIOS] [PATCH V5 9/9] Optional tests for the TIS interface   Stefan Berger
• [SeaBIOS] [PATCH v6 0/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v6 1/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v6 1/3] Boot up with a splash picture configurable   Kevin O'Connor
• [SeaBIOS] [PATCH v6 1/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v6 2/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v6 3/3] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v7 1/2] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [PATCH v7 1/2] Boot up with a splash picture configurable   Kevin O'Connor
• [SeaBIOS] [PATCH v7 2/2] Boot up with a splash picture configurable   Wayne Xia
• [SeaBIOS] [Xen-devel] Re: [PATCH] xen: actually setup hypercalls.   Ian Campbell
• [SeaBIOS] [Xen-devel] Re: [PATCH] xen: actually setup hypercalls.   Kevin O'Connor
• [SeaBIOS] [Xen-devel] Re: [PATCH] xen: actually setup hypercalls.   Ian Campbell
• [SeaBIOS] [Xen-devel] Re: Xen HVM Support   Tobias Geiger
• [SeaBIOS] [Xen-devel] Re: Xen HVM Support   Ian Campbell
• [SeaBIOS] Adding non standard VGA modes   Bernhard Guillon
• [SeaBIOS] Adding non standard VGA modes   Kevin O'Connor
• [SeaBIOS] Adding non standard VGA modes   Bernhard Guillon
• [SeaBIOS] SeaBIOS error with Juniper FreeBSD kernel   Bjørn Mork
• [SeaBIOS] SeaBIOS error with Juniper FreeBSD kernel   Kevin O'Connor
• [SeaBIOS] SeaBIOS error with Juniper FreeBSD kernel   Bjørn Mork
• [SeaBIOS] SeaBIOS error with Juniper FreeBSD kernel   Kevin O'Connor
• [SeaBIOS] SeaBIOS error with Juniper FreeBSD kernel   Sebastian Herbszt
• [SeaBIOS] SeaBIOS error with Juniper FreeBSD kernel   Brandon Bennett
• [SeaBIOS] shadow RAM requirement   Łukasz Mielicki
• [SeaBIOS] shadow RAM requirement   Kevin O'Connor

Last message date: Sat Jul 30 01:23:23 CEST 2011
Archived on: Sat Jul 30 01:39:38 CEST 2011

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...