Small changes from the previous series: - Patch 1/2: cosmetic whitespace change - Patch 2/2: use size suffixes on asm instructions on smp.c - New patch descriptions
Eduardo Habkost (2): acpi: report real I/O APIC ID (0) on MADT table allow CPUs to have non-contiguous Local APIC IDs (v2)
src/acpi-dsdt.dsl | 4 +++- src/acpi.c | 11 ++++++----- src/config.h | 1 + src/mptable.c | 2 +- src/smp.c | 17 +++++++++++++++++ src/util.h | 1 + 6 files changed, 29 insertions(+), 7 deletions(-)
When resetting an I/O APIC, its ID is set to 0, and SeaBIOS doesn't change it, so report it correctly on the MADT table.
Some hardware may require the BIOS to initialize I/O APIC ID to an unique value, but SeaBIOS doesn't do that. This patch at least makes the MADT table reflect reality.
Changes v1 -> v2: - Cosmetic: whitespace change (removed extra newline) - New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com --- src/acpi.c | 2 +- src/config.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/src/acpi.c b/src/acpi.c index d39cbd9..da3bc57 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -336,7 +336,7 @@ build_madt(void) struct madt_io_apic *io_apic = (void*)apic; io_apic->type = APIC_IO; io_apic->length = sizeof(*io_apic); - io_apic->io_apic_id = CountCPUs; + io_apic->io_apic_id = BUILD_IOAPIC_ID; io_apic->address = cpu_to_le32(BUILD_IOAPIC_ADDR); io_apic->interrupt = cpu_to_le32(0);
diff --git a/src/config.h b/src/config.h index 3a70867..0d4066d 100644 --- a/src/config.h +++ b/src/config.h @@ -52,6 +52,7 @@ #define BUILD_PCIMEM64_END 0x10000000000ULL
#define BUILD_IOAPIC_ADDR 0xfec00000 +#define BUILD_IOAPIC_ID 0 #define BUILD_HPET_ADDRESS 0xfed00000 #define BUILD_APIC_ADDR 0xfee00000
Extract Local APIC IDs directly from the CPUs, and instead of check for "i < CountCPUs", check if the APIC ID was present on boot, when building ACPI tables and the MP-Table.
This keeps ACPI Processor ID == APIC ID, but allows the hardware<->SeaBIOS interface be completely APIC-ID based and not depend on any other kind of "CPU identifier". This way, SeaBIOS may change the way ACPI Processor IDs are chosen in the future.
As currently SeaBIOS supports only xAPIC and not x2APIC, the list of present-on-boot APIC IDs is a 256-bit bitmap. If one day SeaBIOS starts to support x2APIC, the data structure used to enumerate the APIC IDs will have to be changed (but this is an internal implementation detail, not visible to the OS or on any hardware<=>SeaBIOS interface).
For current QEMU versions (that always make the APIC IDs contiguous), the OS-visible behavior and resulting ACPI tables should be exactly the same. This patch will simply allow QEMU to start setting non-contiguous APIC IDs (that is a requirement for some sockets/cores/threads topology settings).
Changes v1 -> v2: - Use size suffixes on all asm instructions on smp.c - New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com --- src/acpi-dsdt.dsl | 4 +++- src/acpi.c | 9 +++++---- src/mptable.c | 2 +- src/smp.c | 17 +++++++++++++++++ src/util.h | 1 + 5 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index 2060686..72dc7d8 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -676,6 +676,7 @@ DefinitionBlock ( /* Methods called by run-time generated SSDT Processor objects */ Method (CPMA, 1, NotSerialized) { // _MAT method - create an madt apic buffer + // Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) // Local1 = Buffer (in madt apic form) to return @@ -688,6 +689,7 @@ DefinitionBlock ( } Method (CPST, 1, NotSerialized) { // _STA method - return ON status of cpu + // Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) If (Local0) { Return(0xF) } Else { Return(0x0) } @@ -708,7 +710,7 @@ DefinitionBlock ( Store (PRS, Local5) // Local2 = last read byte from bitmap Store (Zero, Local2) - // Local0 = cpuid iterator + // Local0 = Processor ID / APIC ID iterator Store (Zero, Local0) While (LLess(Local0, SizeOf(CPON))) { // Local1 = CPON flag for this cpu diff --git a/src/acpi.c b/src/acpi.c index da3bc57..39b7172 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -327,7 +327,7 @@ build_madt(void) apic->length = sizeof(*apic); apic->processor_id = i; apic->local_apic_id = i; - if (i < CountCPUs) + if (apic_id_is_present(apic->local_apic_id)) apic->flags = cpu_to_le32(1); else apic->flags = cpu_to_le32(0); @@ -445,6 +445,7 @@ build_ssdt(void) }
// build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}" + // Arg0 = Processor ID = APIC ID *(ssdt_ptr++) = 0x14; // MethodOp ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*acpi_cpus), 2); *(ssdt_ptr++) = 'N'; @@ -477,7 +478,7 @@ build_ssdt(void) ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); *(ssdt_ptr++) = acpi_cpus; for (i=0; i<acpi_cpus; i++) - *(ssdt_ptr++) = (i < CountCPUs) ? 0x01 : 0x00; + *(ssdt_ptr++) = (apic_id_is_present(i)) ? 0x01 : 0x00;
// store pci io windows: start, end, length // this way we don't have to do the math in the dsdt @@ -656,10 +657,10 @@ build_srat(void) core->proximity_lo = curnode; memset(core->proximity_hi, 0, 3); core->local_sapic_eid = 0; - if (i < CountCPUs) + if (apic_id_is_present(i)) core->flags = cpu_to_le32(1); else - core->flags = 0; + core->flags = cpu_to_le32(0); core++; }
diff --git a/src/mptable.c b/src/mptable.c index 103f462..9406f98 100644 --- a/src/mptable.c +++ b/src/mptable.c @@ -59,7 +59,7 @@ mptable_init(void) cpu->apicid = i; cpu->apicver = apic_version; /* cpu flags: enabled, bootstrap cpu */ - cpu->cpuflag = ((i<CountCPUs) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); + cpu->cpuflag = (apic_id_is_present(i) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); cpu->cpusignature = cpuid_signature; cpu->featureflag = cpuid_features; cpu++; diff --git a/src/smp.c b/src/smp.c index 8c077a1..3c36f8c 100644 --- a/src/smp.c +++ b/src/smp.c @@ -36,6 +36,8 @@ wrmsr_smp(u32 index, u64 val)
u32 CountCPUs VAR16VISIBLE; u32 MaxCountCPUs VAR16VISIBLE; +// 256 bits for the found APIC IDs +u32 FoundAPICIDs[256/32] VAR16VISIBLE; extern void smp_ap_boot_code(void); ASM16( " .global smp_ap_boot_code\n" @@ -59,6 +61,12 @@ ASM16( " jmp 1b\n" "2:\n"
+ // get apic ID on EBX, set bit on FoundAPICIDs + " movl $1, %eax\n" + " cpuid\n" + " shrl $24, %ebx\n" + " lock btsl %ebx, FoundAPICIDs\n" + // Increment the cpu counter " lock incl CountCPUs\n"
@@ -67,6 +75,11 @@ ASM16( " jmp 1b\n" );
+int apic_id_is_present(u8 apic_id) +{ + return FoundAPICIDs[apic_id/32] & (1 << (apic_id % 32)); +} + // find and initialize the CPUs by launching a SIPI to them void smp_probe(void) @@ -82,6 +95,10 @@ smp_probe(void) return; }
+ // mark the BSP initial APIC ID as found, too: + u8 apic_id = ebx>>24; + FoundAPICIDs[apic_id/32] |= (1 << (apic_id % 32)); + // Init the counter. writel(&CountCPUs, 1);
diff --git a/src/util.h b/src/util.h index ef8ec7c..89e928c 100644 --- a/src/util.h +++ b/src/util.h @@ -355,6 +355,7 @@ extern u32 CountCPUs; extern u32 MaxCountCPUs; void wrmsr_smp(u32 index, u64 val); void smp_probe(void); +int apic_id_is_present(u8 apic_id);
// coreboot.c extern const char *CBvendor, *CBpart;
On Fri, Jul 20, 2012 at 02:04:49PM -0300, Eduardo Habkost wrote:
When resetting an I/O APIC, its ID is set to 0, and SeaBIOS doesn't change it, so report it correctly on the MADT table.
Some hardware may require the BIOS to initialize I/O APIC ID to an unique value, but SeaBIOS doesn't do that. This patch at least makes the MADT table reflect reality.
Changes v1 -> v2:
- Cosmetic: whitespace change (removed extra newline)
- New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com
src/acpi.c | 2 +- src/config.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/src/acpi.c b/src/acpi.c index d39cbd9..da3bc57 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -336,7 +336,7 @@ build_madt(void) struct madt_io_apic *io_apic = (void*)apic; io_apic->type = APIC_IO; io_apic->length = sizeof(*io_apic);
- io_apic->io_apic_id = CountCPUs;
- io_apic->io_apic_id = BUILD_IOAPIC_ID; io_apic->address = cpu_to_le32(BUILD_IOAPIC_ADDR); io_apic->interrupt = cpu_to_le32(0);
mptable also have ioapic_id.
diff --git a/src/config.h b/src/config.h index 3a70867..0d4066d 100644 --- a/src/config.h +++ b/src/config.h @@ -52,6 +52,7 @@ #define BUILD_PCIMEM64_END 0x10000000000ULL
#define BUILD_IOAPIC_ADDR 0xfec00000 +#define BUILD_IOAPIC_ID 0 #define BUILD_HPET_ADDRESS 0xfed00000 #define BUILD_APIC_ADDR 0xfee00000
-- 1.7.10.4
-- Gleb.
On Fri, Jul 20, 2012 at 02:04:50PM -0300, Eduardo Habkost wrote:
Extract Local APIC IDs directly from the CPUs, and instead of check for "i < CountCPUs", check if the APIC ID was present on boot, when building ACPI tables and the MP-Table.
This keeps ACPI Processor ID == APIC ID, but allows the hardware<->SeaBIOS interface be completely APIC-ID based and not depend on any other kind of "CPU identifier". This way, SeaBIOS may change the way ACPI Processor IDs are chosen in the future.
As currently SeaBIOS supports only xAPIC and not x2APIC, the list of present-on-boot APIC IDs is a 256-bit bitmap. If one day SeaBIOS starts to support x2APIC, the data structure used to enumerate the APIC IDs will have to be changed (but this is an internal implementation detail, not visible to the OS or on any hardware<=>SeaBIOS interface).
For current QEMU versions (that always make the APIC IDs contiguous), the OS-visible behavior and resulting ACPI tables should be exactly the same. This patch will simply allow QEMU to start setting non-contiguous APIC IDs (that is a requirement for some sockets/cores/threads topology settings).
Changes v1 -> v2:
- Use size suffixes on all asm instructions on smp.c
- New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com
src/acpi-dsdt.dsl | 4 +++- src/acpi.c | 9 +++++---- src/mptable.c | 2 +- src/smp.c | 17 +++++++++++++++++ src/util.h | 1 + 5 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index 2060686..72dc7d8 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -676,6 +676,7 @@ DefinitionBlock ( /* Methods called by run-time generated SSDT Processor objects */ Method (CPMA, 1, NotSerialized) { // _MAT method - create an madt apic buffer
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) // Local1 = Buffer (in madt apic form) to return@@ -688,6 +689,7 @@ DefinitionBlock ( } Method (CPST, 1, NotSerialized) { // _STA method - return ON status of cpu
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) If (Local0) { Return(0xF) } Else { Return(0x0) }@@ -708,7 +710,7 @@ DefinitionBlock ( Store (PRS, Local5) // Local2 = last read byte from bitmap Store (Zero, Local2)
// Local0 = cpuid iterator
// Local0 = Processor ID / APIC ID iterator Store (Zero, Local0) While (LLess(Local0, SizeOf(CPON))) { // Local1 = CPON flag for this cpudiff --git a/src/acpi.c b/src/acpi.c index da3bc57..39b7172 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -327,7 +327,7 @@ build_madt(void) apic->length = sizeof(*apic); apic->processor_id = i; apic->local_apic_id = i;
if (i < CountCPUs)
if (apic_id_is_present(apic->local_apic_id)) apic->flags = cpu_to_le32(1); else apic->flags = cpu_to_le32(0);@@ -445,6 +445,7 @@ build_ssdt(void) }
// build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}"
- // Arg0 = Processor ID = APIC ID *(ssdt_ptr++) = 0x14; // MethodOp ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*acpi_cpus), 2); *(ssdt_ptr++) = 'N';
@@ -477,7 +478,7 @@ build_ssdt(void) ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); *(ssdt_ptr++) = acpi_cpus; for (i=0; i<acpi_cpus; i++)
*(ssdt_ptr++) = (i < CountCPUs) ? 0x01 : 0x00;
*(ssdt_ptr++) = (apic_id_is_present(i)) ? 0x01 : 0x00;// store pci io windows: start, end, length // this way we don't have to do the math in the dsdt
@@ -656,10 +657,10 @@ build_srat(void) core->proximity_lo = curnode; memset(core->proximity_hi, 0, 3); core->local_sapic_eid = 0;
if (i < CountCPUs)
if (apic_id_is_present(i)) core->flags = cpu_to_le32(1); else
core->flags = 0;
core->flags = cpu_to_le32(0); core++;diff --git a/src/mptable.c b/src/mptable.c index 103f462..9406f98 100644 --- a/src/mptable.c +++ b/src/mptable.c @@ -59,7 +59,7 @@ mptable_init(void) cpu->apicid = i; cpu->apicver = apic_version; /* cpu flags: enabled, bootstrap cpu */
cpu->cpuflag = ((i<CountCPUs) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00);
cpu->cpuflag = (apic_id_is_present(i) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); cpu->cpusignature = cpuid_signature; cpu->featureflag = cpuid_features; cpu++;diff --git a/src/smp.c b/src/smp.c index 8c077a1..3c36f8c 100644 --- a/src/smp.c +++ b/src/smp.c @@ -36,6 +36,8 @@ wrmsr_smp(u32 index, u64 val)
u32 CountCPUs VAR16VISIBLE; u32 MaxCountCPUs VAR16VISIBLE; +// 256 bits for the found APIC IDs +u32 FoundAPICIDs[256/32] VAR16VISIBLE; extern void smp_ap_boot_code(void); ASM16( " .global smp_ap_boot_code\n" @@ -59,6 +61,12 @@ ASM16( " jmp 1b\n" "2:\n"
- // get apic ID on EBX, set bit on FoundAPICIDs
- " movl $1, %eax\n"
- " cpuid\n"
- " shrl $24, %ebx\n"
- " lock btsl %ebx, FoundAPICIDs\n"
- // Increment the cpu counter " lock incl CountCPUs\n"
You can get rid of CountCPUs by calculating FoundAPICIDs bitmap weight.
@@ -67,6 +75,11 @@ ASM16( " jmp 1b\n" );
+int apic_id_is_present(u8 apic_id) +{
- return FoundAPICIDs[apic_id/32] & (1 << (apic_id % 32));
+}
// find and initialize the CPUs by launching a SIPI to them void smp_probe(void) @@ -82,6 +95,10 @@ smp_probe(void) return; }
- // mark the BSP initial APIC ID as found, too:
- u8 apic_id = ebx>>24;
- FoundAPICIDs[apic_id/32] |= (1 << (apic_id % 32));
- // Init the counter. writel(&CountCPUs, 1);
diff --git a/src/util.h b/src/util.h index ef8ec7c..89e928c 100644 --- a/src/util.h +++ b/src/util.h @@ -355,6 +355,7 @@ extern u32 CountCPUs; extern u32 MaxCountCPUs; void wrmsr_smp(u32 index, u64 val); void smp_probe(void); +int apic_id_is_present(u8 apic_id);
// coreboot.c extern const char *CBvendor, *CBpart; -- 1.7.10.4
-- Gleb.
On Mon, Jul 23, 2012 at 03:16:30PM +0300, Gleb Natapov wrote:
On Fri, Jul 20, 2012 at 02:04:49PM -0300, Eduardo Habkost wrote:
When resetting an I/O APIC, its ID is set to 0, and SeaBIOS doesn't change it, so report it correctly on the MADT table.
Some hardware may require the BIOS to initialize I/O APIC ID to an unique value, but SeaBIOS doesn't do that. This patch at least makes the MADT table reflect reality.
Changes v1 -> v2:
- Cosmetic: whitespace change (removed extra newline)
- New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com
src/acpi.c | 2 +- src/config.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/src/acpi.c b/src/acpi.c index d39cbd9..da3bc57 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -336,7 +336,7 @@ build_madt(void) struct madt_io_apic *io_apic = (void*)apic; io_apic->type = APIC_IO; io_apic->length = sizeof(*io_apic);
- io_apic->io_apic_id = CountCPUs;
- io_apic->io_apic_id = BUILD_IOAPIC_ID; io_apic->address = cpu_to_le32(BUILD_IOAPIC_ADDR); io_apic->interrupt = cpu_to_le32(0);
mptable also have ioapic_id.
Oops. I have grepped for CountCPUs, but somehow I missed it. I will send a new patch soon. Thanks!
diff --git a/src/config.h b/src/config.h index 3a70867..0d4066d 100644 --- a/src/config.h +++ b/src/config.h @@ -52,6 +52,7 @@ #define BUILD_PCIMEM64_END 0x10000000000ULL
#define BUILD_IOAPIC_ADDR 0xfec00000 +#define BUILD_IOAPIC_ID 0 #define BUILD_HPET_ADDRESS 0xfed00000 #define BUILD_APIC_ADDR 0xfee00000
-- 1.7.10.4
-- Gleb.
On Mon, Jul 23, 2012 at 03:20:14PM +0300, Gleb Natapov wrote:
On Fri, Jul 20, 2012 at 02:04:50PM -0300, Eduardo Habkost wrote:
Extract Local APIC IDs directly from the CPUs, and instead of check for "i < CountCPUs", check if the APIC ID was present on boot, when building ACPI tables and the MP-Table.
This keeps ACPI Processor ID == APIC ID, but allows the hardware<->SeaBIOS interface be completely APIC-ID based and not depend on any other kind of "CPU identifier". This way, SeaBIOS may change the way ACPI Processor IDs are chosen in the future.
As currently SeaBIOS supports only xAPIC and not x2APIC, the list of present-on-boot APIC IDs is a 256-bit bitmap. If one day SeaBIOS starts to support x2APIC, the data structure used to enumerate the APIC IDs will have to be changed (but this is an internal implementation detail, not visible to the OS or on any hardware<=>SeaBIOS interface).
For current QEMU versions (that always make the APIC IDs contiguous), the OS-visible behavior and resulting ACPI tables should be exactly the same. This patch will simply allow QEMU to start setting non-contiguous APIC IDs (that is a requirement for some sockets/cores/threads topology settings).
Changes v1 -> v2:
- Use size suffixes on all asm instructions on smp.c
- New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com
src/acpi-dsdt.dsl | 4 +++- src/acpi.c | 9 +++++---- src/mptable.c | 2 +- src/smp.c | 17 +++++++++++++++++ src/util.h | 1 + 5 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index 2060686..72dc7d8 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -676,6 +676,7 @@ DefinitionBlock ( /* Methods called by run-time generated SSDT Processor objects */ Method (CPMA, 1, NotSerialized) { // _MAT method - create an madt apic buffer
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) // Local1 = Buffer (in madt apic form) to return@@ -688,6 +689,7 @@ DefinitionBlock ( } Method (CPST, 1, NotSerialized) { // _STA method - return ON status of cpu
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) If (Local0) { Return(0xF) } Else { Return(0x0) }@@ -708,7 +710,7 @@ DefinitionBlock ( Store (PRS, Local5) // Local2 = last read byte from bitmap Store (Zero, Local2)
// Local0 = cpuid iterator
// Local0 = Processor ID / APIC ID iterator Store (Zero, Local0) While (LLess(Local0, SizeOf(CPON))) { // Local1 = CPON flag for this cpudiff --git a/src/acpi.c b/src/acpi.c index da3bc57..39b7172 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -327,7 +327,7 @@ build_madt(void) apic->length = sizeof(*apic); apic->processor_id = i; apic->local_apic_id = i;
if (i < CountCPUs)
if (apic_id_is_present(apic->local_apic_id)) apic->flags = cpu_to_le32(1); else apic->flags = cpu_to_le32(0);@@ -445,6 +445,7 @@ build_ssdt(void) }
// build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}"
- // Arg0 = Processor ID = APIC ID *(ssdt_ptr++) = 0x14; // MethodOp ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*acpi_cpus), 2); *(ssdt_ptr++) = 'N';
@@ -477,7 +478,7 @@ build_ssdt(void) ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); *(ssdt_ptr++) = acpi_cpus; for (i=0; i<acpi_cpus; i++)
*(ssdt_ptr++) = (i < CountCPUs) ? 0x01 : 0x00;
*(ssdt_ptr++) = (apic_id_is_present(i)) ? 0x01 : 0x00;// store pci io windows: start, end, length // this way we don't have to do the math in the dsdt
@@ -656,10 +657,10 @@ build_srat(void) core->proximity_lo = curnode; memset(core->proximity_hi, 0, 3); core->local_sapic_eid = 0;
if (i < CountCPUs)
if (apic_id_is_present(i)) core->flags = cpu_to_le32(1); else
core->flags = 0;
core->flags = cpu_to_le32(0); core++;diff --git a/src/mptable.c b/src/mptable.c index 103f462..9406f98 100644 --- a/src/mptable.c +++ b/src/mptable.c @@ -59,7 +59,7 @@ mptable_init(void) cpu->apicid = i; cpu->apicver = apic_version; /* cpu flags: enabled, bootstrap cpu */
cpu->cpuflag = ((i<CountCPUs) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00);
cpu->cpuflag = (apic_id_is_present(i) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); cpu->cpusignature = cpuid_signature; cpu->featureflag = cpuid_features; cpu++;diff --git a/src/smp.c b/src/smp.c index 8c077a1..3c36f8c 100644 --- a/src/smp.c +++ b/src/smp.c @@ -36,6 +36,8 @@ wrmsr_smp(u32 index, u64 val)
u32 CountCPUs VAR16VISIBLE; u32 MaxCountCPUs VAR16VISIBLE; +// 256 bits for the found APIC IDs +u32 FoundAPICIDs[256/32] VAR16VISIBLE; extern void smp_ap_boot_code(void); ASM16( " .global smp_ap_boot_code\n" @@ -59,6 +61,12 @@ ASM16( " jmp 1b\n" "2:\n"
- // get apic ID on EBX, set bit on FoundAPICIDs
- " movl $1, %eax\n"
- " cpuid\n"
- " shrl $24, %ebx\n"
- " lock btsl %ebx, FoundAPICIDs\n"
- // Increment the cpu counter " lock incl CountCPUs\n"
You can get rid of CountCPUs by calculating FoundAPICIDs bitmap weight.
I was going to do that after you suggested, but then I saw this:
while (cmos_smp_count + 1 != readl(&CountCPUs)) yield();
It's possible to replace the atomic read of CountCPUs with the bitmap weight calculation on the loop, but: is it really worth it?
@@ -67,6 +75,11 @@ ASM16( " jmp 1b\n" );
+int apic_id_is_present(u8 apic_id) +{
- return FoundAPICIDs[apic_id/32] & (1 << (apic_id % 32));
+}
// find and initialize the CPUs by launching a SIPI to them void smp_probe(void) @@ -82,6 +95,10 @@ smp_probe(void) return; }
- // mark the BSP initial APIC ID as found, too:
- u8 apic_id = ebx>>24;
- FoundAPICIDs[apic_id/32] |= (1 << (apic_id % 32));
- // Init the counter. writel(&CountCPUs, 1);
diff --git a/src/util.h b/src/util.h index ef8ec7c..89e928c 100644 --- a/src/util.h +++ b/src/util.h @@ -355,6 +355,7 @@ extern u32 CountCPUs; extern u32 MaxCountCPUs; void wrmsr_smp(u32 index, u64 val); void smp_probe(void); +int apic_id_is_present(u8 apic_id);
// coreboot.c extern const char *CBvendor, *CBpart; -- 1.7.10.4
-- Gleb.
On Wed, Jul 25, 2012 at 03:42:21PM -0300, Eduardo Habkost wrote:
On Mon, Jul 23, 2012 at 03:20:14PM +0300, Gleb Natapov wrote:
On Fri, Jul 20, 2012 at 02:04:50PM -0300, Eduardo Habkost wrote:
Extract Local APIC IDs directly from the CPUs, and instead of check for "i < CountCPUs", check if the APIC ID was present on boot, when building ACPI tables and the MP-Table.
This keeps ACPI Processor ID == APIC ID, but allows the hardware<->SeaBIOS interface be completely APIC-ID based and not depend on any other kind of "CPU identifier". This way, SeaBIOS may change the way ACPI Processor IDs are chosen in the future.
As currently SeaBIOS supports only xAPIC and not x2APIC, the list of present-on-boot APIC IDs is a 256-bit bitmap. If one day SeaBIOS starts to support x2APIC, the data structure used to enumerate the APIC IDs will have to be changed (but this is an internal implementation detail, not visible to the OS or on any hardware<=>SeaBIOS interface).
For current QEMU versions (that always make the APIC IDs contiguous), the OS-visible behavior and resulting ACPI tables should be exactly the same. This patch will simply allow QEMU to start setting non-contiguous APIC IDs (that is a requirement for some sockets/cores/threads topology settings).
Changes v1 -> v2:
- Use size suffixes on all asm instructions on smp.c
- New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com
src/acpi-dsdt.dsl | 4 +++- src/acpi.c | 9 +++++---- src/mptable.c | 2 +- src/smp.c | 17 +++++++++++++++++ src/util.h | 1 + 5 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index 2060686..72dc7d8 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -676,6 +676,7 @@ DefinitionBlock ( /* Methods called by run-time generated SSDT Processor objects */ Method (CPMA, 1, NotSerialized) { // _MAT method - create an madt apic buffer
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) // Local1 = Buffer (in madt apic form) to return@@ -688,6 +689,7 @@ DefinitionBlock ( } Method (CPST, 1, NotSerialized) { // _STA method - return ON status of cpu
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) If (Local0) { Return(0xF) } Else { Return(0x0) }@@ -708,7 +710,7 @@ DefinitionBlock ( Store (PRS, Local5) // Local2 = last read byte from bitmap Store (Zero, Local2)
// Local0 = cpuid iterator
// Local0 = Processor ID / APIC ID iterator Store (Zero, Local0) While (LLess(Local0, SizeOf(CPON))) { // Local1 = CPON flag for this cpudiff --git a/src/acpi.c b/src/acpi.c index da3bc57..39b7172 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -327,7 +327,7 @@ build_madt(void) apic->length = sizeof(*apic); apic->processor_id = i; apic->local_apic_id = i;
if (i < CountCPUs)
if (apic_id_is_present(apic->local_apic_id)) apic->flags = cpu_to_le32(1); else apic->flags = cpu_to_le32(0);@@ -445,6 +445,7 @@ build_ssdt(void) }
// build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}"
- // Arg0 = Processor ID = APIC ID *(ssdt_ptr++) = 0x14; // MethodOp ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*acpi_cpus), 2); *(ssdt_ptr++) = 'N';
@@ -477,7 +478,7 @@ build_ssdt(void) ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); *(ssdt_ptr++) = acpi_cpus; for (i=0; i<acpi_cpus; i++)
*(ssdt_ptr++) = (i < CountCPUs) ? 0x01 : 0x00;
*(ssdt_ptr++) = (apic_id_is_present(i)) ? 0x01 : 0x00;// store pci io windows: start, end, length // this way we don't have to do the math in the dsdt
@@ -656,10 +657,10 @@ build_srat(void) core->proximity_lo = curnode; memset(core->proximity_hi, 0, 3); core->local_sapic_eid = 0;
if (i < CountCPUs)
if (apic_id_is_present(i)) core->flags = cpu_to_le32(1); else
core->flags = 0;
core->flags = cpu_to_le32(0); core++;diff --git a/src/mptable.c b/src/mptable.c index 103f462..9406f98 100644 --- a/src/mptable.c +++ b/src/mptable.c @@ -59,7 +59,7 @@ mptable_init(void) cpu->apicid = i; cpu->apicver = apic_version; /* cpu flags: enabled, bootstrap cpu */
cpu->cpuflag = ((i<CountCPUs) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00);
cpu->cpuflag = (apic_id_is_present(i) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); cpu->cpusignature = cpuid_signature; cpu->featureflag = cpuid_features; cpu++;diff --git a/src/smp.c b/src/smp.c index 8c077a1..3c36f8c 100644 --- a/src/smp.c +++ b/src/smp.c @@ -36,6 +36,8 @@ wrmsr_smp(u32 index, u64 val)
u32 CountCPUs VAR16VISIBLE; u32 MaxCountCPUs VAR16VISIBLE; +// 256 bits for the found APIC IDs +u32 FoundAPICIDs[256/32] VAR16VISIBLE; extern void smp_ap_boot_code(void); ASM16( " .global smp_ap_boot_code\n" @@ -59,6 +61,12 @@ ASM16( " jmp 1b\n" "2:\n"
- // get apic ID on EBX, set bit on FoundAPICIDs
- " movl $1, %eax\n"
- " cpuid\n"
- " shrl $24, %ebx\n"
- " lock btsl %ebx, FoundAPICIDs\n"
- // Increment the cpu counter " lock incl CountCPUs\n"
You can get rid of CountCPUs by calculating FoundAPICIDs bitmap weight.
I was going to do that after you suggested, but then I saw this:
while (cmos_smp_count + 1 != readl(&CountCPUs)) yield();It's possible to replace the atomic read of CountCPUs with the bitmap weight calculation on the loop, but: is it really worth it?
Why not? This eliminates one more global state.
-- Gleb.
On Thu, Jul 26, 2012 at 09:08:40AM +0300, Gleb Natapov wrote:
On Wed, Jul 25, 2012 at 03:42:21PM -0300, Eduardo Habkost wrote:
On Mon, Jul 23, 2012 at 03:20:14PM +0300, Gleb Natapov wrote:
On Fri, Jul 20, 2012 at 02:04:50PM -0300, Eduardo Habkost wrote:
Extract Local APIC IDs directly from the CPUs, and instead of check for "i < CountCPUs", check if the APIC ID was present on boot, when building ACPI tables and the MP-Table.
This keeps ACPI Processor ID == APIC ID, but allows the hardware<->SeaBIOS interface be completely APIC-ID based and not depend on any other kind of "CPU identifier". This way, SeaBIOS may change the way ACPI Processor IDs are chosen in the future.
As currently SeaBIOS supports only xAPIC and not x2APIC, the list of present-on-boot APIC IDs is a 256-bit bitmap. If one day SeaBIOS starts to support x2APIC, the data structure used to enumerate the APIC IDs will have to be changed (but this is an internal implementation detail, not visible to the OS or on any hardware<=>SeaBIOS interface).
For current QEMU versions (that always make the APIC IDs contiguous), the OS-visible behavior and resulting ACPI tables should be exactly the same. This patch will simply allow QEMU to start setting non-contiguous APIC IDs (that is a requirement for some sockets/cores/threads topology settings).
Changes v1 -> v2:
- Use size suffixes on all asm instructions on smp.c
- New patch description
Signed-off-by: Eduardo Habkost ehabkost@redhat.com
src/acpi-dsdt.dsl | 4 +++- src/acpi.c | 9 +++++---- src/mptable.c | 2 +- src/smp.c | 17 +++++++++++++++++ src/util.h | 1 + 5 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index 2060686..72dc7d8 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -676,6 +676,7 @@ DefinitionBlock ( /* Methods called by run-time generated SSDT Processor objects */ Method (CPMA, 1, NotSerialized) { // _MAT method - create an madt apic buffer
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) // Local1 = Buffer (in madt apic form) to return@@ -688,6 +689,7 @@ DefinitionBlock ( } Method (CPST, 1, NotSerialized) { // _STA method - return ON status of cpu
// Arg0 = Processor ID = Local APIC ID // Local0 = CPON flag for this cpu Store(DerefOf(Index(CPON, Arg0)), Local0) If (Local0) { Return(0xF) } Else { Return(0x0) }@@ -708,7 +710,7 @@ DefinitionBlock ( Store (PRS, Local5) // Local2 = last read byte from bitmap Store (Zero, Local2)
// Local0 = cpuid iterator
// Local0 = Processor ID / APIC ID iterator Store (Zero, Local0) While (LLess(Local0, SizeOf(CPON))) { // Local1 = CPON flag for this cpudiff --git a/src/acpi.c b/src/acpi.c index da3bc57..39b7172 100644 --- a/src/acpi.c +++ b/src/acpi.c @@ -327,7 +327,7 @@ build_madt(void) apic->length = sizeof(*apic); apic->processor_id = i; apic->local_apic_id = i;
if (i < CountCPUs)
if (apic_id_is_present(apic->local_apic_id)) apic->flags = cpu_to_le32(1); else apic->flags = cpu_to_le32(0);@@ -445,6 +445,7 @@ build_ssdt(void) }
// build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}"
- // Arg0 = Processor ID = APIC ID *(ssdt_ptr++) = 0x14; // MethodOp ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*acpi_cpus), 2); *(ssdt_ptr++) = 'N';
@@ -477,7 +478,7 @@ build_ssdt(void) ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); *(ssdt_ptr++) = acpi_cpus; for (i=0; i<acpi_cpus; i++)
*(ssdt_ptr++) = (i < CountCPUs) ? 0x01 : 0x00;
*(ssdt_ptr++) = (apic_id_is_present(i)) ? 0x01 : 0x00;// store pci io windows: start, end, length // this way we don't have to do the math in the dsdt
@@ -656,10 +657,10 @@ build_srat(void) core->proximity_lo = curnode; memset(core->proximity_hi, 0, 3); core->local_sapic_eid = 0;
if (i < CountCPUs)
if (apic_id_is_present(i)) core->flags = cpu_to_le32(1); else
core->flags = 0;
core->flags = cpu_to_le32(0); core++;diff --git a/src/mptable.c b/src/mptable.c index 103f462..9406f98 100644 --- a/src/mptable.c +++ b/src/mptable.c @@ -59,7 +59,7 @@ mptable_init(void) cpu->apicid = i; cpu->apicver = apic_version; /* cpu flags: enabled, bootstrap cpu */
cpu->cpuflag = ((i<CountCPUs) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00);
cpu->cpuflag = (apic_id_is_present(i) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); cpu->cpusignature = cpuid_signature; cpu->featureflag = cpuid_features; cpu++;diff --git a/src/smp.c b/src/smp.c index 8c077a1..3c36f8c 100644 --- a/src/smp.c +++ b/src/smp.c @@ -36,6 +36,8 @@ wrmsr_smp(u32 index, u64 val)
u32 CountCPUs VAR16VISIBLE; u32 MaxCountCPUs VAR16VISIBLE; +// 256 bits for the found APIC IDs +u32 FoundAPICIDs[256/32] VAR16VISIBLE; extern void smp_ap_boot_code(void); ASM16( " .global smp_ap_boot_code\n" @@ -59,6 +61,12 @@ ASM16( " jmp 1b\n" "2:\n"
- // get apic ID on EBX, set bit on FoundAPICIDs
- " movl $1, %eax\n"
- " cpuid\n"
- " shrl $24, %ebx\n"
- " lock btsl %ebx, FoundAPICIDs\n"
- // Increment the cpu counter " lock incl CountCPUs\n"
You can get rid of CountCPUs by calculating FoundAPICIDs bitmap weight.
I was going to do that after you suggested, but then I saw this:
while (cmos_smp_count + 1 != readl(&CountCPUs)) yield();It's possible to replace the atomic read of CountCPUs with the bitmap weight calculation on the loop, but: is it really worth it?
Why not? This eliminates one more global state.
Maybe we can simply make it stop being global and be used only by the smp.c initialization code?
Even if the variable didn't exist yet, I think I would add it myself: it's simpler and more efficient to calculate the bitmap weight once, while filling the bitmap, than recalculating it every time on the while(cmos_smp_count) loop.
On 07/26/2012 05:16 PM, Eduardo Habkost wrote:
It's possible to replace the atomic read of CountCPUs with the bitmap weight calculation on the loop, but: is it really worth it?
Why not? This eliminates one more global state.
Maybe we can simply make it stop being global and be used only by the smp.c initialization code?
Even if the variable didn't exist yet, I think I would add it myself: it's simpler and more efficient to calculate the bitmap weight once, while filling the bitmap, than recalculating it every time on the while(cmos_smp_count) loop.
So you're spinning more efficiently?
On Thu, Jul 26, 2012 at 05:55:09PM +0300, Avi Kivity wrote:
On 07/26/2012 05:16 PM, Eduardo Habkost wrote:
It's possible to replace the atomic read of CountCPUs with the bitmap weight calculation on the loop, but: is it really worth it?
Why not? This eliminates one more global state.
Maybe we can simply make it stop being global and be used only by the smp.c initialization code?
Even if the variable didn't exist yet, I think I would add it myself: it's simpler and more efficient to calculate the bitmap weight once, while filling the bitmap, than recalculating it every time on the while(cmos_smp_count) loop.
So you're spinning more efficiently?
No, coding more efficiently. I'm lazy. :-)
I don't want to risk breaking that part of the code to save 2 bytes of memory. It's possible to impement it reliably, yes, but it's also very easy to introduce a subtle bug, so why touch something that works perfectly just to save 2 bytes?
On 07/26/2012 06:07 PM, Eduardo Habkost wrote:
On Thu, Jul 26, 2012 at 05:55:09PM +0300, Avi Kivity wrote:
On 07/26/2012 05:16 PM, Eduardo Habkost wrote:
It's possible to replace the atomic read of CountCPUs with the bitmap weight calculation on the loop, but: is it really worth it?
Why not? This eliminates one more global state.
Maybe we can simply make it stop being global and be used only by the smp.c initialization code?
Even if the variable didn't exist yet, I think I would add it myself: it's simpler and more efficient to calculate the bitmap weight once, while filling the bitmap, than recalculating it every time on the while(cmos_smp_count) loop.
So you're spinning more efficiently?
No, coding more efficiently. I'm lazy. :-)
I don't want to risk breaking that part of the code to save 2 bytes of memory. It's possible to impement it reliably, yes, but it's also very easy to introduce a subtle bug, so why touch something that works perfectly just to save 2 bytes?
Like gleb, I prefer avoiding derived state which can get out-of-sync.
On Thu, Jul 26, 2012 at 07:08:19PM +0300, Avi Kivity wrote:
On 07/26/2012 06:07 PM, Eduardo Habkost wrote:
On Thu, Jul 26, 2012 at 05:55:09PM +0300, Avi Kivity wrote:
On 07/26/2012 05:16 PM, Eduardo Habkost wrote:
It's possible to replace the atomic read of CountCPUs with the bitmap weight calculation on the loop, but: is it really worth it?
Why not? This eliminates one more global state.
Maybe we can simply make it stop being global and be used only by the smp.c initialization code?
Even if the variable didn't exist yet, I think I would add it myself: it's simpler and more efficient to calculate the bitmap weight once, while filling the bitmap, than recalculating it every time on the while(cmos_smp_count) loop.
So you're spinning more efficiently?
No, coding more efficiently. I'm lazy. :-)
I don't want to risk breaking that part of the code to save 2 bytes of memory. It's possible to impement it reliably, yes, but it's also very easy to introduce a subtle bug, so why touch something that works perfectly just to save 2 bytes?
Like gleb, I prefer avoiding derived state which can get out-of-sync.
It is calculated only once on boot, and only used inside smp_probe() and nowhere else (after applying this series, I mean). Personally I am more afraid of subtle races between the bit-setting and the (non-atomic) bitmap weight calculation + loop, than getting CountCPUs out of sync while smp_probe() runs.
Note that I am all for making it not a global variable anymore, and use it only inside smp_probe() and nowhere else (this series does that, the only thing missing is to remove it from util.h). If anybody wants to eliminate it from smp_probe() too, be my guest. :)
(I am hoping this is just a suggestion of an additional improvement, not an issue that would block this patch from inclusion)
-
Avi Kivity -
Eduardo Habkost -
Gleb Natapov