[SeaBIOS][PATCH] USB:Fix xHCI initail fail by using longer reset and CNR clear timeout value

Some xHCI controller's reset time than 100ms,such as 120ms.
On the on hand, xHCI spec has not specified a timeout value.
Maybe setting xHCI HCRST and CNR bit clear timeout value larger
is a nice thing.As a compromise between compatibility and
latency,we can take 1000ms as a timeout value.

Signed-off-by: WeitaoWangoc 
---
 src/hw/usb-xhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/hw/usb-xhci.c b/src/hw/usb-xhci.c
index 08d1e32..21d091f 100644
--- a/src/hw/usb-xhci.c
+++ b/src/hw/usb-xhci.c
@@ -467,9 +467,9 @@ configure_xhci(void *data)

dprintf(3, "%s: resetting\n", __func__);
     writel(&xhci->op->usbcmd, XHCI_CMD_HCRST);
-    if (wait_bit(&xhci->op->usbcmd, XHCI_CMD_HCRST, 0, 100) != 0)
+    if (wait_bit(&xhci->op->usbcmd, XHCI_CMD_HCRST, 0, 1000) != 0)
         goto fail;
-    if (wait_bit(&xhci->op->usbsts, XHCI_STS_CNR, 0, 100) != 0)
+    if (wait_bit(&xhci->op->usbsts, XHCI_STS_CNR, 0, 1000) != 0)
         goto fail;

writel(&xhci->op->config, xhci->slots);