Re: [SeaBIOS] [RFC PATCH v2 4/6] hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote:
On PCI init PCI bridges may need some extra info about bus number to reserve, IO, memory and prefetchable memory limits. QEMU can provide this with special
with a special
vendor-specific PCI capability.
Sizes of limits match ones from PCI Type 1 Configuration Space Header, number of buses to reserve occupies only 1 byte since it is the size of Subordinate Bus Number register.
Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com
hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ 2 files changed, 45 insertions(+)
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 720119b..8ec6c2c 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, br->bus_name = bus_name; }
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp)+{
- size_t cap_len = sizeof(PCIBridgeQemuCap);
- PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
- cap.len = cap_len;
- cap.bus_res = bus_reserve;
- cap.io_lim = io_limit & 0xFF;
- cap.io_lim_upper = io_limit >> 8 & 0xFFFF;
- cap.mem_lim = mem_limit;
- cap.pref_lim = pref_limit & 0xFFFF;
- cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
- int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR,
cap_offset, cap_len, errp);- if (offset < 0) {
return offset;- }
- memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
- return 0;
+}
static const TypeInfo pci_bridge_type_info = { .name = TYPE_PCI_BRIDGE, .parent = TYPE_PCI_DEVICE, diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index ff7cbaa..c9f642c 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */
+typedef struct PCIBridgeQemuCap {
- uint8_t id; /* Standard PCI capability header field */
- uint8_t next; /* Standard PCI capability header field */
- uint8_t len; /* Standard PCI vendor-specific capability header field */
- uint8_t bus_res;
- uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
- uint16_t pref_lim;
- uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
- uint16_t io_lim_upper;
- uint8_t io_lim;
- uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
+} PCIBridgeQemuCap;
You don't really need this struct in the header. And pls document all fields.
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp);#endif /* QEMU_PCI_BRIDGE_H */
2.7.4
-- Alexander Bezzubikov
On 27/07/2017 2:28, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote:
On PCI init PCI bridges may need some extra info about bus number to reserve, IO, memory and prefetchable memory limits. QEMU can provide this with special
with a special
vendor-specific PCI capability.
Sizes of limits match ones from PCI Type 1 Configuration Space Header, number of buses to reserve occupies only 1 byte since it is the size of Subordinate Bus Number register.
Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com
hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ 2 files changed, 45 insertions(+)
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 720119b..8ec6c2c 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, br->bus_name = bus_name; }
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp)+{
- size_t cap_len = sizeof(PCIBridgeQemuCap);
- PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
- cap.len = cap_len;
- cap.bus_res = bus_reserve;
- cap.io_lim = io_limit & 0xFF;
- cap.io_lim_upper = io_limit >> 8 & 0xFFFF;
- cap.mem_lim = mem_limit;
- cap.pref_lim = pref_limit & 0xFFFF;
- cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
- int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR,
cap_offset, cap_len, errp);- if (offset < 0) {
return offset;- }
- memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
- return 0;
+}
- static const TypeInfo pci_bridge_type_info = { .name = TYPE_PCI_BRIDGE, .parent = TYPE_PCI_DEVICE,
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index ff7cbaa..c9f642c 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */
+typedef struct PCIBridgeQemuCap {
- uint8_t id; /* Standard PCI capability header field */
- uint8_t next; /* Standard PCI capability header field */
- uint8_t len; /* Standard PCI vendor-specific capability header field */
- uint8_t bus_res;
- uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
- uint16_t pref_lim;
- uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
- uint16_t io_lim_upper;
- uint8_t io_lim;
- uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
We can keep the MEM/Limit registers read-only for such cases, as they are optional registers.
Thanks, Marcel
+} PCIBridgeQemuCap;
You don't really need this struct in the header. And pls document all fields.
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp);- #endif /* QEMU_PCI_BRIDGE_H */
-- 2.7.4
-- Alexander Bezzubikov
On 07/27/17 11:39, Marcel Apfelbaum wrote:
On 27/07/2017 2:28, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote:
On PCI init PCI bridges may need some extra info about bus number to reserve, IO, memory and prefetchable memory limits. QEMU can provide this with special
with a special
vendor-specific PCI capability.
Sizes of limits match ones from PCI Type 1 Configuration Space Header, number of buses to reserve occupies only 1 byte since it is the size of Subordinate Bus Number register.
Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com
hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ 2 files changed, 45 insertions(+)
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 720119b..8ec6c2c 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, br->bus_name = bus_name; }
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_tpref_limit,
Error **errp)+{
- size_t cap_len = sizeof(PCIBridgeQemuCap);
- PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
- cap.len = cap_len;
- cap.bus_res = bus_reserve;
- cap.io_lim = io_limit & 0xFF;
- cap.io_lim_upper = io_limit >> 8 & 0xFFFF;
- cap.mem_lim = mem_limit;
- cap.pref_lim = pref_limit & 0xFFFF;
- cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
- int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR,
cap_offset, cap_len, errp);- if (offset < 0) {
return offset;- }
- memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
- return 0;
+}
- static const TypeInfo pci_bridge_type_info = { .name = TYPE_PCI_BRIDGE, .parent = TYPE_PCI_DEVICE,
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index ff7cbaa..c9f642c 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */
+typedef struct PCIBridgeQemuCap {
- uint8_t id; /* Standard PCI capability header field */
- uint8_t next; /* Standard PCI capability header field */
- uint8_t len; /* Standard PCI vendor-specific capability
header field */
- uint8_t bus_res;
- uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
- uint16_t pref_lim;
- uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
- uint16_t io_lim_upper;
- uint8_t io_lim;
- uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
We can keep the MEM/Limit registers read-only for such cases, as they are optional registers.
For OVMF, it would be really nice if OVMF could gather the reservation numbers with - read-only accesses - to the one exact hotplug controller (root port, bridge, etc) that's being queried for reservation.
Deciding whether some registers in config space are r/o would require OVMF to attempt a write and check the result (and if it succeeded, to restore the original value). I'm not too attracted to doing this in a platform hook, while PciBusDxe is in the middle of enumerating / configuring the PCI(e) hierarchy :)
Thanks Laszlo
On Thu, Jul 27, 2017 at 12:39:54PM +0300, Marcel Apfelbaum wrote:
On 27/07/2017 2:28, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote:
On PCI init PCI bridges may need some extra info about bus number to reserve, IO, memory and prefetchable memory limits. QEMU can provide this with special
with a special
vendor-specific PCI capability.
Sizes of limits match ones from PCI Type 1 Configuration Space Header, number of buses to reserve occupies only 1 byte since it is the size of Subordinate Bus Number register.
Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com
hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ 2 files changed, 45 insertions(+)
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 720119b..8ec6c2c 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, br->bus_name = bus_name; }
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp)+{
- size_t cap_len = sizeof(PCIBridgeQemuCap);
- PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
- cap.len = cap_len;
- cap.bus_res = bus_reserve;
- cap.io_lim = io_limit & 0xFF;
- cap.io_lim_upper = io_limit >> 8 & 0xFFFF;
- cap.mem_lim = mem_limit;
- cap.pref_lim = pref_limit & 0xFFFF;
- cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
- int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR,
cap_offset, cap_len, errp);- if (offset < 0) {
return offset;- }
- memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
- return 0;
+}
- static const TypeInfo pci_bridge_type_info = { .name = TYPE_PCI_BRIDGE, .parent = TYPE_PCI_DEVICE,
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index ff7cbaa..c9f642c 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */
+typedef struct PCIBridgeQemuCap {
- uint8_t id; /* Standard PCI capability header field */
- uint8_t next; /* Standard PCI capability header field */
- uint8_t len; /* Standard PCI vendor-specific capability header field */
- uint8_t bus_res;
- uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
- uint16_t pref_lim;
- uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
- uint16_t io_lim_upper;
- uint8_t io_lim;
- uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
We can keep the MEM/Limit registers read-only for such cases, as they are optional registers.
Thanks, Marcel
I don't believe they are - from the spec (1.2): The Memory Base and Memory Limit registers are both required registers
Rest of ranges are indeed optional.
+} PCIBridgeQemuCap;
You don't really need this struct in the header. And pls document all fields.
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp);- #endif /* QEMU_PCI_BRIDGE_H */
-- 2.7.4
-- Alexander Bezzubikov
On Thu, Jul 27, 2017 at 03:58:58PM +0200, Laszlo Ersek wrote:
On 07/27/17 11:39, Marcel Apfelbaum wrote:
On 27/07/2017 2:28, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote:
On PCI init PCI bridges may need some extra info about bus number to reserve, IO, memory and prefetchable memory limits. QEMU can provide this with special
with a special
vendor-specific PCI capability.
Sizes of limits match ones from PCI Type 1 Configuration Space Header, number of buses to reserve occupies only 1 byte since it is the size of Subordinate Bus Number register.
Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com
hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ 2 files changed, 45 insertions(+)
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 720119b..8ec6c2c 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, br->bus_name = bus_name; }
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_tpref_limit,
Error **errp)+{
- size_t cap_len = sizeof(PCIBridgeQemuCap);
- PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
- cap.len = cap_len;
- cap.bus_res = bus_reserve;
- cap.io_lim = io_limit & 0xFF;
- cap.io_lim_upper = io_limit >> 8 & 0xFFFF;
- cap.mem_lim = mem_limit;
- cap.pref_lim = pref_limit & 0xFFFF;
- cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
- int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR,
cap_offset, cap_len, errp);- if (offset < 0) {
return offset;- }
- memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
- return 0;
+}
- static const TypeInfo pci_bridge_type_info = { .name = TYPE_PCI_BRIDGE, .parent = TYPE_PCI_DEVICE,
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index ff7cbaa..c9f642c 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */
+typedef struct PCIBridgeQemuCap {
- uint8_t id; /* Standard PCI capability header field */
- uint8_t next; /* Standard PCI capability header field */
- uint8_t len; /* Standard PCI vendor-specific capability
header field */
- uint8_t bus_res;
- uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
- uint16_t pref_lim;
- uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
- uint16_t io_lim_upper;
- uint8_t io_lim;
- uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
We can keep the MEM/Limit registers read-only for such cases, as they are optional registers.
For OVMF, it would be really nice if OVMF could gather the reservation numbers with
- read-only accesses
- to the one exact hotplug controller (root port, bridge, etc) that's being queried for reservation.
Deciding whether some registers in config space are r/o would require OVMF to attempt a write and check the result (and if it succeeded, to restore the original value). I'm not too attracted to doing this in a platform hook, while PciBusDxe is in the middle of enumerating / configuring the PCI(e) hierarchy :)
Thanks Laszlo
Well that's the PCI spec, I don't think there's a choice for regular bridges. If we have this capability this is a possible optimization. But without it, if you assign ranges without checking whether they are available they won't have any effect practically. It's mostly harmless, but you are going to waste resources.
On 29/07/2017 2:12, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:39:54PM +0300, Marcel Apfelbaum wrote:
On 27/07/2017 2:28, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote:
On PCI init PCI bridges may need some extra info about bus number to reserve, IO, memory and prefetchable memory limits. QEMU can provide this with special
with a special
vendor-specific PCI capability.
Sizes of limits match ones from PCI Type 1 Configuration Space Header, number of buses to reserve occupies only 1 byte since it is the size of Subordinate Bus Number register.
Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com
hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ 2 files changed, 45 insertions(+)
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 720119b..8ec6c2c 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, br->bus_name = bus_name; }
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp)+{
- size_t cap_len = sizeof(PCIBridgeQemuCap);
- PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
- cap.len = cap_len;
- cap.bus_res = bus_reserve;
- cap.io_lim = io_limit & 0xFF;
- cap.io_lim_upper = io_limit >> 8 & 0xFFFF;
- cap.mem_lim = mem_limit;
- cap.pref_lim = pref_limit & 0xFFFF;
- cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
- int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR,
cap_offset, cap_len, errp);- if (offset < 0) {
return offset;- }
- memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
- return 0;
+}
- static const TypeInfo pci_bridge_type_info = { .name = TYPE_PCI_BRIDGE, .parent = TYPE_PCI_DEVICE,
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index ff7cbaa..c9f642c 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */
+typedef struct PCIBridgeQemuCap {
- uint8_t id; /* Standard PCI capability header field */
- uint8_t next; /* Standard PCI capability header field */
- uint8_t len; /* Standard PCI vendor-specific capability header field */
- uint8_t bus_res;
- uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
- uint16_t pref_lim;
- uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
- uint16_t io_lim_upper;
- uint8_t io_lim;
- uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
We can keep the MEM/Limit registers read-only for such cases, as they are optional registers.
Thanks, Marcel
Hi Michael,
I don't believe they are - from the spec (1.2): The Memory Base and Memory Limit registers are both required registers
Rest of ranges are indeed optional.
Oops, my mistake, I looked at prefetchable memory, sorry for the mix-up. I wonder what would be the use case to disable IOMEM.
Anyway, we can have a "-1" default value giving the hint: do not reserve anything, but in this case we should use it also for IO/prefetch mem. The problem is, the guest OS can try to allocate IO space even if the firmware didn't; Linux does it today. Having IO-base/IO-limit registers read-only will solve the problem.
What am I getting at is we would have now 2 ways to solve the same problem and the hint would be inferior.
I would use the hint to reserve a specific range and read only registers to disable the range. IOMEM cannot be disabled in this way, but should not bother us.
Thanks, Marcel
+} PCIBridgeQemuCap;
You don't really need this struct in the header. And pls document all fields.
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
uint8_t bus_reserve, uint32_t io_limit,uint16_t mem_limit, uint64_t pref_limit,Error **errp);- #endif /* QEMU_PCI_BRIDGE_H */
-- 2.7.4
-- Alexander Bezzubikov
On 07/29/17 01:15, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 03:58:58PM +0200, Laszlo Ersek wrote:
On 07/27/17 11:39, Marcel Apfelbaum wrote:
On 27/07/2017 2:28, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote: > On PCI init PCI bridges may need some > extra info about bus number to reserve, IO, memory and > prefetchable memory limits. QEMU can provide this > with special
with a special
> vendor-specific PCI capability. > > Sizes of limits match ones from > PCI Type 1 Configuration Space Header, > number of buses to reserve occupies only 1 byte > since it is the size of Subordinate Bus Number register. > > Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com > --- > hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ > include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ > 2 files changed, 45 insertions(+) > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > index 720119b..8ec6c2c 100644 > --- a/hw/pci/pci_bridge.c > +++ b/hw/pci/pci_bridge.c > @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const > char* bus_name, > br->bus_name = bus_name; > } > > + > +int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
> + uint8_t bus_reserve, uint32_t io_limit, > + uint16_t mem_limit, uint64_t > pref_limit, > + Error **errp) > +{ > + size_t cap_len = sizeof(PCIBridgeQemuCap); > + PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
> + > + cap.len = cap_len; > + cap.bus_res = bus_reserve; > + cap.io_lim = io_limit & 0xFF; > + cap.io_lim_upper = io_limit >> 8 & 0xFFFF; > + cap.mem_lim = mem_limit; > + cap.pref_lim = pref_limit & 0xFFFF; > + cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
> + > + int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR, > + cap_offset, cap_len, errp); > + if (offset < 0) { > + return offset; > + } > + > + memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
> + return 0; > +} > + > static const TypeInfo pci_bridge_type_info = { > .name = TYPE_PCI_BRIDGE, > .parent = TYPE_PCI_DEVICE, > diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h > index ff7cbaa..c9f642c 100644 > --- a/include/hw/pci/pci_bridge.h > +++ b/include/hw/pci/pci_bridge.h > @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const > char* bus_name, > #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard > timer status */ > #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer > SERR# enable */ > > +typedef struct PCIBridgeQemuCap { > + uint8_t id; /* Standard PCI capability header field */ > + uint8_t next; /* Standard PCI capability header field */ > + uint8_t len; /* Standard PCI vendor-specific capability > header field */ > + uint8_t bus_res; > + uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
> + uint16_t pref_lim; > + uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
> + uint16_t io_lim_upper; > + uint8_t io_lim; > + uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
We can keep the MEM/Limit registers read-only for such cases, as they are optional registers.
For OVMF, it would be really nice if OVMF could gather the reservation numbers with
- read-only accesses
- to the one exact hotplug controller (root port, bridge, etc) that's being queried for reservation.
Deciding whether some registers in config space are r/o would require OVMF to attempt a write and check the result (and if it succeeded, to restore the original value). I'm not too attracted to doing this in a platform hook, while PciBusDxe is in the middle of enumerating / configuring the PCI(e) hierarchy :)
Thanks Laszlo
Well that's the PCI spec, I don't think there's a choice for regular bridges. If we have this capability this is a possible optimization. But without it, if you assign ranges without checking whether they are available they won't have any effect practically. It's mostly harmless, but you are going to waste resources.
OK. If the proposed solution with the r/o mem base/limit registers is rooted in the spec (and I think it indeed must be; apparently this would be the same as what we're already planning for IO disablement), then that's a strong argument for PciBusDxe to accommodate this probing in the platform hook.
Thanks Laszlo
On Mon, Jul 31, 2017 at 01:06:23PM +0300, Marcel Apfelbaum wrote:
On 29/07/2017 2:12, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:39:54PM +0300, Marcel Apfelbaum wrote:
On 27/07/2017 2:28, Michael S. Tsirkin wrote:
On Thu, Jul 27, 2017 at 12:54:07AM +0300, Alexander Bezzubikov wrote:
2017-07-26 22:43 GMT+03:00 Michael S. Tsirkin mst@redhat.com:
On Sun, Jul 23, 2017 at 01:15:41AM +0300, Aleksandr Bezzubikov wrote: > On PCI init PCI bridges may need some > extra info about bus number to reserve, IO, memory and > prefetchable memory limits. QEMU can provide this > with special
with a special
> vendor-specific PCI capability. > > Sizes of limits match ones from > PCI Type 1 Configuration Space Header, > number of buses to reserve occupies only 1 byte > since it is the size of Subordinate Bus Number register. > > Signed-off-by: Aleksandr Bezzubikov zuban32s@gmail.com > --- > hw/pci/pci_bridge.c | 27 +++++++++++++++++++++++++++ > include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++ > 2 files changed, 45 insertions(+) > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > index 720119b..8ec6c2c 100644 > --- a/hw/pci/pci_bridge.c > +++ b/hw/pci/pci_bridge.c > @@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, > br->bus_name = bus_name; > } > > + > +int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
help? should be qemu_cap_init?
> + uint8_t bus_reserve, uint32_t io_limit, > + uint16_t mem_limit, uint64_t pref_limit, > + Error **errp) > +{ > + size_t cap_len = sizeof(PCIBridgeQemuCap); > + PCIBridgeQemuCap cap;
This leaks info to guest. You want to init all fields here:
cap = { .len = .... };
I surely can do this for len field, but as Laszlo proposed we can use mutually exclusive fields, e.g. pref_32 and pref_64, the only way I have left is to use ternary operator (if we surely need this big initializer). Keeping some if's would look better, I think.
> + > + cap.len = cap_len; > + cap.bus_res = bus_reserve; > + cap.io_lim = io_limit & 0xFF; > + cap.io_lim_upper = io_limit >> 8 & 0xFFFF; > + cap.mem_lim = mem_limit; > + cap.pref_lim = pref_limit & 0xFFFF; > + cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
Please use pci_set_word etc or cpu_to_leXX.
Since now we've decided to avoid fields separation into <field> + <field_upper>, this bitmask along with pci_set_word are no longer needed.
I think it's easiest to replace struct with a set of macros then pci_set_word does the work for you.
I don't really want to use macros here because structure show us the whole capability layout and this can decrease documenting efforts. More than that, memcpy usage is very convenient here, and I wouldn't like to lose it.
> + > + int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR, > + cap_offset, cap_len, errp); > + if (offset < 0) { > + return offset; > + } > + > + memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+2 is yacky. See how virtio does it:
memcpy(dev->config + offset + PCI_CAP_FLAGS, &cap->cap_len, cap->cap_len - PCI_CAP_FLAGS);OK.
> + return 0; > +} > + > static const TypeInfo pci_bridge_type_info = { > .name = TYPE_PCI_BRIDGE, > .parent = TYPE_PCI_DEVICE, > diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h > index ff7cbaa..c9f642c 100644 > --- a/include/hw/pci/pci_bridge.h > +++ b/include/hw/pci/pci_bridge.h > @@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, > #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ > #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */ > > +typedef struct PCIBridgeQemuCap { > + uint8_t id; /* Standard PCI capability header field */ > + uint8_t next; /* Standard PCI capability header field */ > + uint8_t len; /* Standard PCI vendor-specific capability header field */ > + uint8_t bus_res; > + uint32_t pref_lim_upper;
Big endian? Ugh.
Agreed, and this's gonna to disappear with the new layout.
> + uint16_t pref_lim; > + uint16_t mem_lim;
I'd say we need 64 bit for memory.
Why? Non-prefetchable MEMORY_LIMIT register is 16 bits long.
Hmm ok, but e.g. for io there are bridges that have extra registers to specify non-standard non-aligned registers.
> + uint16_t io_lim_upper; > + uint8_t io_lim; > + uint8_t padding;
IMHO each type should have a special "don't care" flag that would mean "I don't know".
Don't know what? Now 0 is an indicator to do nothing with this field.
In that case how do you say "don't allocate any memory"?
We can keep the MEM/Limit registers read-only for such cases, as they are optional registers.
Thanks, Marcel
Hi Michael,
I don't believe they are - from the spec (1.2): The Memory Base and Memory Limit registers are both required registers
Rest of ranges are indeed optional.
Oops, my mistake, I looked at prefetchable memory, sorry for the mix-up. I wonder what would be the use case to disable IOMEM.
Anyway, we can have a "-1" default value giving the hint: do not reserve anything, but in this case we should use it also for IO/prefetch mem. The problem is, the guest OS can try to allocate IO space even if the firmware didn't; Linux does it today. Having IO-base/IO-limit registers read-only will solve the problem.
Makes sense.
What am I getting at is we would have now 2 ways to solve the same problem and the hint would be inferior.
I would use the hint to reserve a specific range and read only registers to disable the range. IOMEM cannot be disabled in this way, but should not bother us.
Thanks, Marcel
I think Laszlo said that RO as an interface to indicate optional range is tricky to use.
> +} PCIBridgeQemuCap;
You don't really need this struct in the header. And pls document all fields.
> + > +int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset, > + uint8_t bus_reserve, uint32_t io_limit, > + uint16_t mem_limit, uint64_t pref_limit, > + Error **errp); > + > #endif /* QEMU_PCI_BRIDGE_H */ > -- > 2.7.4
-- Alexander Bezzubikov
On Mon, Jul 31, 2017 at 08:16:49PM +0200, Laszlo Ersek wrote:
OK. If the proposed solution with the r/o mem base/limit registers is rooted in the spec (and I think it indeed must be; apparently this would be the same as what we're already planning for IO disablement), then that's a strong argument for PciBusDxe to accommodate this probing in the platform hook.
Thanks Laszlo
Do you mean making base/limit read-only?
On 07/31/17 20:55, Michael S. Tsirkin wrote:
On Mon, Jul 31, 2017 at 08:16:49PM +0200, Laszlo Ersek wrote:
OK. If the proposed solution with the r/o mem base/limit registers is rooted in the spec (and I think it indeed must be; apparently this would be the same as what we're already planning for IO disablement), then that's a strong argument for PciBusDxe to accommodate this probing in the platform hook.
Thanks Laszlo
Do you mean making base/limit read-only?
Yes, I do. (Perhaps writing "r/o" was too terse.)
Thanks Laszlo
-
Laszlo Ersek -
Marcel Apfelbaum -
Michael S. Tsirkin