Hello,
We are using intel atom C3558 denverton_NS platform. This platform is booting with coreboot4.16. Payload of coreboot is Seabios. Openbsd running in our board. Coreboot is booting successfully. I press ESC key when I see "Press ESC for boot menu" print but I can not select boot device. It is booting automatically. I want to select boot device. I check seabios community and disabled CONFIG_HARDWARE_IRQ but nothing changed. You can find seabios config file above. You can find coreboot config file above. How can i solve this problem.
Mahmut ÖLGER Embedded Software Engineer.
Dear Mahmut,
[Please just sent plain text message to mailing lists [1].]
Am 21.12.22 um 13:59 schrieb Mahmut Olger via SeaBIOS:
We are using intel atom C3558 denverton_NS platform. This platform is booting with coreboot4.16.
Nice. Unrelated, are you going to upstream the board port?
Payload of coreboot is Seabios. Openbsd running in our board. Coreboot is booting successfully. I press ESC key when I see "Press ESC for boot menu" print but I can not select boot device. It is booting automatically. I want to select boot device. I check seabios community and disabled CONFIG_HARDWARE_IRQ but nothing changed. You can find seabios config file above. You can find coreboot config file above. How can i solve this problem.
Please increase the debug level of SeaBIOS to 5, and after booting save the log messages from the CBMEM console area with the utility `cbmem -1`, and attach the output. (No idea, if it runs on OpenBSD, if not use GNU/Linux.) You can also capture logs from the serial console.
As SeaBIOS code is pretty well tested, I guess there is a problem with your board (coreboot) port. Please test another payload like GRUB, coreinfo, FILO or EDK2 to check if they can enable the keyboard.
Kind regards,
Paul
-
Mahmut Olger -
Paul Menzel