On Tue, May 19, 2015 at 04:43:49PM +0200, Vladimir 'phcoder' Serbinenko wrote:
Le 19 mai 2015 15:51, "Kevin O'Connor" kevin@koconnor.net a écrit :
The _reloc_abs_start definition isn't available if CONFIG_RELOCATE_INIT is disabled - I think the symbol you want is code32flat_start. Both should be available in a top level ASM32FLAT() and in romlayout.S.
code32flat-start misses all the relocation entries
It shouldn't - take a look at the generated file out/romlayout32flat.lds
Also, I just noticed in your comments that the bios.bin.raw file was used in your example. That's not an exported file today (the build could fail while that file still exists). Does multi-boot require a raw image to deploy (that is, a single linear area of memory that is copied to a final location)?
Multiboot can either load ELF or a linear file. In either case the header needs to be in first 8K of resulting file. File produced by SeaBIOS contains few hundred kilobytes of zeros. I didn't manage to insert 12 bytes header in first 8K because of it. I'll give it another try
The system linkers tend to do funky things with alignment, which is what causes the .elf files to be huge. I don't know how to fix that.
I wouldn't worry about it too much though - something like the below (totally untested) should be fine.
-Kevin
--- a/Makefile +++ b/Makefile @@ -88,6 +88,7 @@ target-y := target-$(CONFIG_QEMU) += $(OUT)bios.bin target-$(CONFIG_CSM) += $(OUT)Csm16.bin target-$(CONFIG_COREBOOT) += $(OUT)bios.bin.elf +target-$(CONFIG_MULTIBOOT) += $(OUT)bios.bin.multiboot target-$(CONFIG_BUILD_VGABIOS) += $(OUT)vgabios.bin
all: $(target-y) @@ -194,6 +195,10 @@ $(OUT)Csm16.bin: $(OUT)bios.bin.prep @echo " Creating $@" $(Q)cp $< $@
+$(OUT)bios.bin.multiboot: $(OUT)rom.o $(OUT)bios.bin.prep + @echo " Creating $@" + $(Q)$(OBJCOPY) -O binary $< $@ + $(OUT)bios.bin.elf: $(OUT)rom.o $(OUT)bios.bin.prep @echo " Creating $@" $(Q)$(STRIP) -R .comment $< -o $(OUT)bios.bin.elf
On 19.05.2015 17:03, Kevin O'Connor wrote:
On Tue, May 19, 2015 at 04:43:49PM +0200, Vladimir 'phcoder' Serbinenko wrote:
Le 19 mai 2015 15:51, "Kevin O'Connor" kevin@koconnor.net a écrit :
The _reloc_abs_start definition isn't available if CONFIG_RELOCATE_INIT is disabled - I think the symbol you want is code32flat_start. Both should be available in a top level ASM32FLAT() and in romlayout.S.
code32flat-start misses all the relocation entries
It shouldn't - take a look at the generated file out/romlayout32flat.lds
Also, I just noticed in your comments that the bios.bin.raw file was used in your example. That's not an exported file today (the build could fail while that file still exists). Does multi-boot require a raw image to deploy (that is, a single linear area of memory that is copied to a final location)?
Multiboot can either load ELF or a linear file. In either case the header needs to be in first 8K of resulting file. File produced by SeaBIOS contains few hundred kilobytes of zeros. I didn't manage to insert 12 bytes header in first 8K because of it. I'll give it another try
The system linkers tend to do funky things with alignment, which is what causes the .elf files to be huge. I don't know how to fix that.
I do, see new patch in new thread.
I wouldn't worry about it too much though - something like the below (totally untested) should be fine.
-Kevin
--- a/Makefile +++ b/Makefile @@ -88,6 +88,7 @@ target-y := target-$(CONFIG_QEMU) += $(OUT)bios.bin target-$(CONFIG_CSM) += $(OUT)Csm16.bin target-$(CONFIG_COREBOOT) += $(OUT)bios.bin.elf +target-$(CONFIG_MULTIBOOT) += $(OUT)bios.bin.multiboot target-$(CONFIG_BUILD_VGABIOS) += $(OUT)vgabios.bin
all: $(target-y) @@ -194,6 +195,10 @@ $(OUT)Csm16.bin: $(OUT)bios.bin.prep @echo " Creating $@" $(Q)cp $< $@
+$(OUT)bios.bin.multiboot: $(OUT)rom.o $(OUT)bios.bin.prep
@echo " Creating $@"$(Q)$(OBJCOPY) -O binary $< $@$(OUT)bios.bin.elf: $(OUT)rom.o $(OUT)bios.bin.prep @echo " Creating $@" $(Q)$(STRIP) -R .comment $< -o $(OUT)bios.bin.elf
-
Kevin O'Connor -
Vladimir 'φ-coder/phcoder' Serbinenko