Hi,
Finally found the time to polish the xhci implementation and improve usb core support for xhci. So here we go.
cheers, Gerd
Gerd Hoffmann (4): uas: add (temporary) superspeed stopgap usb: don't free usbdev usb: add usb_update_pipe() usb: add xhci support
Makefile | 2 +- src/Kconfig | 6 + src/pci_ids.h | 1 + src/usb-uas.c | 4 + src/usb-xhci.c | 1124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/usb-xhci.h | 144 ++++++++ src/usb.c | 37 +- src/usb.h | 17 +- 8 files changed, 1320 insertions(+), 15 deletions(-) create mode 100644 src/usb-xhci.c create mode 100644 src/usb-xhci.h
Signed-off-by: Gerd Hoffmann kraxel@redhat.com --- src/usb-uas.c | 4 ++++ src/usb.h | 1 + 2 files changed, 5 insertions(+)
diff --git a/src/usb-uas.c b/src/usb-uas.c index 3169389..77b9ea1 100644 --- a/src/usb-uas.c +++ b/src/usb-uas.c @@ -220,6 +220,10 @@ usb_uas_setup(struct usbdevice_s *usbdev) case USB_DT_ENDPOINT: ep = (void*)desc; break; + case USB_DT_ENDPOINT_COMPANION: + /* No support (yet) for usb3 streams */ + dprintf(1, "Superspeed UAS devices not supported (yet)\n"); + goto fail; case 0x24: switch (desc[2]) { case UAS_PIPE_ID_COMMAND: diff --git a/src/usb.h b/src/usb.h index a43e829..d9eadd7 100644 --- a/src/usb.h +++ b/src/usb.h @@ -130,6 +130,7 @@ struct usb_ctrlrequest { #define USB_DT_ENDPOINT 0x05 #define USB_DT_DEVICE_QUALIFIER 0x06 #define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_ENDPOINT_COMPANION 0x30
struct usb_device_descriptor { u8 bLength;
xhci needs them even after completing device initialization. xhci must to walk up the chain to the root port and the usbdevs (of usb hubs) are part of it. --- src/usb.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/src/usb.c b/src/usb.c index 42541ff..808f426 100644 --- a/src/usb.c +++ b/src/usb.c @@ -378,7 +378,6 @@ usb_hub_port_setup(void *data) hub->devcount += count; done: hub->threads--; - free(usbdev); return;
resetfail:
Preparation for better xhci support: allows to notify host controllers instead of going through a free+alloc cycle.
Signed-off-by: Gerd Hoffmann kraxel@redhat.com --- src/usb.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/src/usb.c b/src/usb.c index 808f426..903dd78 100644 --- a/src/usb.c +++ b/src/usb.c @@ -40,6 +40,18 @@ usb_alloc_pipe(struct usbdevice_s *usbdev } }
+// Update an pipe (used for control only) +struct usb_pipe * +usb_update_pipe(struct usbdevice_s *usbdev, struct usb_pipe *pipe + , struct usb_endpoint_descriptor *epdesc) +{ + switch (usbdev->hub->cntl->type) { + default: + free_pipe(pipe); + return usb_alloc_pipe(usbdev, epdesc); + } +} + // Send a message on a control pipe using the default control descriptor. static int send_control(struct usb_pipe *pipe, int dir, const void *cmd, int cmdsize @@ -258,7 +270,6 @@ usb_set_address(struct usbdevice_s *usbdev) req.wIndex = 0; req.wLength = 0; int ret = send_default_control(usbdev->defpipe, &req, NULL); - free_pipe(usbdev->defpipe); if (ret) return -1;
@@ -266,7 +277,7 @@ usb_set_address(struct usbdevice_s *usbdev)
cntl->maxaddr++; usbdev->devaddr = cntl->maxaddr; - usbdev->defpipe = usb_alloc_pipe(usbdev, &epdesc); + usbdev->defpipe = usb_update_pipe(usbdev, usbdev->defpipe, &epdesc); if (!usbdev->defpipe) return -1; return 0; @@ -290,12 +301,11 @@ configure_usb_device(struct usbdevice_s *usbdev) , dinfo.bDeviceProtocol, dinfo.bMaxPacketSize0); if (dinfo.bMaxPacketSize0 < 8 || dinfo.bMaxPacketSize0 > 64) return 0; - free_pipe(usbdev->defpipe); struct usb_endpoint_descriptor epdesc = { .wMaxPacketSize = dinfo.bMaxPacketSize0, .bmAttributes = USB_ENDPOINT_XFER_CONTROL, }; - usbdev->defpipe = usb_alloc_pipe(usbdev, &epdesc); + usbdev->defpipe = usb_update_pipe(usbdev, usbdev->defpipe, &epdesc); if (!usbdev->defpipe) return -1;
@@ -372,9 +382,10 @@ usb_hub_port_setup(void *data)
// Configure the device int count = configure_usb_device(usbdev); - free_pipe(usbdev->defpipe); - if (!count) + if (!count) { + free_pipe(usbdev->defpipe); hub->op->disconnect(hub, port); + } hub->devcount += count; done: hub->threads--;
$subject says all. Support for usb3 streams is not implemented yet, otherwise it is fully functional. Tested all usb devices supported by qemu (keyboard, storage, usb hubs), except for usb attached scsi in usb3 mode (which needs streams).
Tested on qemu only, tagged with QEMU_HARDWARE because of that. Testing with physical hardware to be done.
Signed-off-by: Gerd Hoffmann kraxel@redhat.com --- Makefile | 2 +- src/Kconfig | 6 + src/pci_ids.h | 1 + src/usb-xhci.c | 1124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/usb-xhci.h | 144 ++++++++ src/usb.c | 13 + src/usb.h | 16 +- 7 files changed, 1298 insertions(+), 8 deletions(-) create mode 100644 src/usb-xhci.c create mode 100644 src/usb-xhci.h
diff --git a/Makefile b/Makefile index 2116407..bbaa8a9 100644 --- a/Makefile +++ b/Makefile @@ -11,7 +11,7 @@ OUT=out/ SRCBOTH=misc.c stacks.c output.c util.c block.c floppy.c ata.c mouse.c \ kbd.c pci.c serial.c timer.c clock.c pic.c cdrom.c ps2port.c smp.c resume.c \ pnpbios.c vgahooks.c ramdisk.c pcibios.c blockcmd.c \ - usb.c usb-uhci.c usb-ohci.c usb-ehci.c usb-hid.c usb-msc.c \ + usb.c usb-uhci.c usb-ohci.c usb-ehci.c usb-xhci.c usb-hid.c usb-msc.c \ virtio-ring.c virtio-pci.c virtio-blk.c virtio-scsi.c apm.c ahci.c \ usb-uas.c lsi-scsi.c esp-scsi.c megasas.c SRC16=$(SRCBOTH) system.c disk.c font.c diff --git a/src/Kconfig b/src/Kconfig index 3a7d6bd..c40cc61 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -216,6 +216,12 @@ menu "Hardware support" default y help Support USB EHCI controllers. + config USB_XHCI + depends on USB && QEMU_HARDWARE + bool "USB XHCI controllers" + default y + help + Support USB XHCI controllers. config USB_MSC depends on USB && DRIVES bool "USB drives" diff --git a/src/pci_ids.h b/src/pci_ids.h index 665e945..322d156 100644 --- a/src/pci_ids.h +++ b/src/pci_ids.h @@ -104,6 +104,7 @@ #define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 #define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 #define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 +#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330 #define PCI_CLASS_SERIAL_FIBER 0x0c04 #define PCI_CLASS_SERIAL_SMBUS 0x0c05
diff --git a/src/usb-xhci.c b/src/usb-xhci.c new file mode 100644 index 0000000..a78714a --- /dev/null +++ b/src/usb-xhci.c @@ -0,0 +1,1124 @@ +#include "config.h" // CONFIG_* +#include "util.h" // dprintf +#include "pci.h" // pci_bdf_to_bus +#include "pci_regs.h" // PCI_BASE_ADDRESS_0 +#include "usb.h" // struct usb_s +#include "usb-xhci.h" // struct ehci_qh +#include "biosvar.h" // GET_LOWFLAT + +// -------------------------------------------------------------- +// configuration + +#define XHCI_RING_ITEMS 16 +#define XHCI_RING_SIZE (XHCI_RING_ITEMS*sizeof(struct xhci_trb)) + +/* + * xhci_ring structs are allocated with XHCI_RING_SIZE alignment, + * then we can get it from a trb pointer (provided by evt ring). + */ +#define XHCI_RING(_trb) \ + ((struct xhci_ring*)((u32)(_trb) & ~(XHCI_RING_SIZE-1))) + +// -------------------------------------------------------------- +// bit definitions + +#define XHCI_CMD_RS (1<<0) +#define XHCI_CMD_HCRST (1<<1) +#define XHCI_CMD_INTE (1<<2) +#define XHCI_CMD_HSEE (1<<3) +#define XHCI_CMD_LHCRST (1<<7) +#define XHCI_CMD_CSS (1<<8) +#define XHCI_CMD_CRS (1<<9) +#define XHCI_CMD_EWE (1<<10) +#define XHCI_CMD_EU3S (1<<11) + +#define XHCI_STS_HCH (1<<0) +#define XHCI_STS_HSE (1<<2) +#define XHCI_STS_EINT (1<<3) +#define XHCI_STS_PCD (1<<4) +#define XHCI_STS_SSS (1<<8) +#define XHCI_STS_RSS (1<<9) +#define XHCI_STS_SRE (1<<10) +#define XHCI_STS_CNR (1<<11) +#define XHCI_STS_HCE (1<<12) + +#define XHCI_PORTSC_CCS (1<<0) +#define XHCI_PORTSC_PED (1<<1) +#define XHCI_PORTSC_OCA (1<<3) +#define XHCI_PORTSC_PR (1<<4) +#define XHCI_PORTSC_PLS_SHIFT 5 +#define XHCI_PORTSC_PLS_MASK 0xf +#define XHCI_PORTSC_PP (1<<9) +#define XHCI_PORTSC_SPEED_SHIFT 10 +#define XHCI_PORTSC_SPEED_MASK 0xf +#define XHCI_PORTSC_SPEED_FULL (1<<10) +#define XHCI_PORTSC_SPEED_LOW (2<<10) +#define XHCI_PORTSC_SPEED_HIGH (3<<10) +#define XHCI_PORTSC_SPEED_SUPER (4<<10) +#define XHCI_PORTSC_PIC_SHIFT 14 +#define XHCI_PORTSC_PIC_MASK 0x3 +#define XHCI_PORTSC_LWS (1<<16) +#define XHCI_PORTSC_CSC (1<<17) +#define XHCI_PORTSC_PEC (1<<18) +#define XHCI_PORTSC_WRC (1<<19) +#define XHCI_PORTSC_OCC (1<<20) +#define XHCI_PORTSC_PRC (1<<21) +#define XHCI_PORTSC_PLC (1<<22) +#define XHCI_PORTSC_CEC (1<<23) +#define XHCI_PORTSC_CAS (1<<24) +#define XHCI_PORTSC_WCE (1<<25) +#define XHCI_PORTSC_WDE (1<<26) +#define XHCI_PORTSC_WOE (1<<27) +#define XHCI_PORTSC_DR (1<<30) +#define XHCI_PORTSC_WPR (1<<31) + +#define TRB_C (1<<0) +#define TRB_TYPE_SHIFT 10 +#define TRB_TYPE_MASK 0x3f +#define TRB_TYPE(t) (((t) >> TRB_TYPE_SHIFT) & TRB_TYPE_MASK) + +#define TRB_EV_ED (1<<2) + +#define TRB_TR_ENT (1<<1) +#define TRB_TR_ISP (1<<2) +#define TRB_TR_NS (1<<3) +#define TRB_TR_CH (1<<4) +#define TRB_TR_IOC (1<<5) +#define TRB_TR_IDT (1<<6) +#define TRB_TR_TBC_SHIFT 7 +#define TRB_TR_TBC_MASK 0x3 +#define TRB_TR_BEI (1<<9) +#define TRB_TR_TLBPC_SHIFT 16 +#define TRB_TR_TLBPC_MASK 0xf +#define TRB_TR_FRAMEID_SHIFT 20 +#define TRB_TR_FRAMEID_MASK 0x7ff +#define TRB_TR_SIA (1<<31) + +#define TRB_TR_DIR (1<<16) + +#define TRB_CR_SLOTID_SHIFT 24 +#define TRB_CR_SLOTID_MASK 0xff +#define TRB_CR_EPID_SHIFT 16 +#define TRB_CR_EPID_MASK 0x1f + +#define TRB_CR_BSR (1<<9) +#define TRB_CR_DC (1<<9) + +#define TRB_LK_TC (1<<1) + +#define TRB_INTR_SHIFT 22 +#define TRB_INTR_MASK 0x3ff +#define TRB_INTR(t) (((t).status >> TRB_INTR_SHIFT) & TRB_INTR_MASK) + +typedef enum TRBType { + TRB_RESERVED = 0, + TR_NORMAL, + TR_SETUP, + TR_DATA, + TR_STATUS, + TR_ISOCH, + TR_LINK, + TR_EVDATA, + TR_NOOP, + CR_ENABLE_SLOT, + CR_DISABLE_SLOT, + CR_ADDRESS_DEVICE, + CR_CONFIGURE_ENDPOINT, + CR_EVALUATE_CONTEXT, + CR_RESET_ENDPOINT, + CR_STOP_ENDPOINT, + CR_SET_TR_DEQUEUE, + CR_RESET_DEVICE, + CR_FORCE_EVENT, + CR_NEGOTIATE_BW, + CR_SET_LATENCY_TOLERANCE, + CR_GET_PORT_BANDWIDTH, + CR_FORCE_HEADER, + CR_NOOP, + ER_TRANSFER = 32, + ER_COMMAND_COMPLETE, + ER_PORT_STATUS_CHANGE, + ER_BANDWIDTH_REQUEST, + ER_DOORBELL, + ER_HOST_CONTROLLER, + ER_DEVICE_NOTIFICATION, + ER_MFINDEX_WRAP, +} TRBType; + +typedef enum TRBCCode { + CC_INVALID = 0, + CC_SUCCESS, + CC_DATA_BUFFER_ERROR, + CC_BABBLE_DETECTED, + CC_USB_TRANSACTION_ERROR, + CC_TRB_ERROR, + CC_STALL_ERROR, + CC_RESOURCE_ERROR, + CC_BANDWIDTH_ERROR, + CC_NO_SLOTS_ERROR, + CC_INVALID_STREAM_TYPE_ERROR, + CC_SLOT_NOT_ENABLED_ERROR, + CC_EP_NOT_ENABLED_ERROR, + CC_SHORT_PACKET, + CC_RING_UNDERRUN, + CC_RING_OVERRUN, + CC_VF_ER_FULL, + CC_PARAMETER_ERROR, + CC_BANDWIDTH_OVERRUN, + CC_CONTEXT_STATE_ERROR, + CC_NO_PING_RESPONSE_ERROR, + CC_EVENT_RING_FULL_ERROR, + CC_INCOMPATIBLE_DEVICE_ERROR, + CC_MISSED_SERVICE_ERROR, + CC_COMMAND_RING_STOPPED, + CC_COMMAND_ABORTED, + CC_STOPPED, + CC_STOPPED_LENGTH_INVALID, + CC_MAX_EXIT_LATENCY_TOO_LARGE_ERROR = 29, + CC_ISOCH_BUFFER_OVERRUN = 31, + CC_EVENT_LOST_ERROR, + CC_UNDEFINED_ERROR, + CC_INVALID_STREAM_ID_ERROR, + CC_SECONDARY_BANDWIDTH_ERROR, + CC_SPLIT_TRANSACTION_ERROR +} TRBCCode; + +enum { + PLS_U0 = 0, + PLS_U1 = 1, + PLS_U2 = 2, + PLS_U3 = 3, + PLS_DISABLED = 4, + PLS_RX_DETECT = 5, + PLS_INACTIVE = 6, + PLS_POLLING = 7, + PLS_RECOVERY = 8, + PLS_HOT_RESET = 9, + PLS_COMPILANCE_MODE = 10, + PLS_TEST_MODE = 11, + PLS_RESUME = 15, +}; + +#define xhci_get_field(data, field) \ + (((data) >> field##_SHIFT) & field##_MASK) + +// -------------------------------------------------------------- +// state structs + +struct xhci_ring { + struct xhci_trb ring[XHCI_RING_ITEMS]; + struct xhci_trb evt; + u32 eidx; + u32 nidx; + u32 cs; + struct mutex_s lock; +}; + +struct usb_xhci_s { + struct usb_s usb; + struct usbhub_s hub; + + /* devinfo */ + u32 baseaddr; + u32 xcap; + u32 ports; + u32 slots; + + /* xhci registers */ + struct xhci_caps *caps; + struct xhci_op *op; + struct xhci_pr *pr; + struct xhci_ir *ir; + struct xhci_db *db; + + /* xhci data structures */ + struct xhci_devlist *devs; + struct xhci_ring *cmds; + struct xhci_ring *evts; + struct xhci_er_seg *eseg; + + /* usb devices */ + struct xhci_device *list; +}; + +struct xhci_device { + struct xhci_devctx devctx; + struct xhci_inctx inctx; + + struct usbdevice_s *usbdev; + struct usb_xhci_s *xhci; + struct xhci_device *next; + u32 slotid; +}; + +struct xhci_pipe { + struct xhci_ring reqs; + + struct usb_pipe pipe; + struct xhci_device *dev; + u32 epid; + void *buf; + int bufused; +}; + +// -------------------------------------------------------------- +// tables + +static const char *speed_name[16] = { + [ 0 ] = " - ", + [ 1 ] = "Full", + [ 2 ] = "Low", + [ 3 ] = "High", + [ 4 ] = "Super", +}; + +static const int speed_from_xhci[16] = { + [ 0 ... 15 ] = -1, + [ 1 ] = USB_FULLSPEED, + [ 2 ] = USB_LOWSPEED, + [ 3 ] = USB_HIGHSPEED, + [ 4 ] = USB_SUPERSPEED, +}; + +static const int speed_to_xhci[] = { + [ USB_FULLSPEED ] = 1, + [ USB_LOWSPEED ] = 2, + [ USB_HIGHSPEED ] = 3, + [ USB_SUPERSPEED ] = 4, +}; + +static const int speed_to_ctlsize[] = { + [ USB_FULLSPEED ] = 8, + [ USB_LOWSPEED ] = 8, + [ USB_HIGHSPEED ] = 64, + [ USB_SUPERSPEED ] = 256, +}; + +static const int eptype_to_xhci_in[] = { + [ USB_ENDPOINT_XFER_CONTROL] = 4, + [ USB_ENDPOINT_XFER_ISOC ] = 5, + [ USB_ENDPOINT_XFER_BULK ] = 6, + [ USB_ENDPOINT_XFER_INT ] = 7, +}; + +static const int eptype_to_xhci_out[] = { + [ USB_ENDPOINT_XFER_CONTROL] = 4, + [ USB_ENDPOINT_XFER_ISOC ] = 1, + [ USB_ENDPOINT_XFER_BULK ] = 2, + [ USB_ENDPOINT_XFER_INT ] = 3, +}; + +// -------------------------------------------------------------- +// internal functions, 16bit + 32bit + +static void xhci_doorbell(struct usb_xhci_s *xhci, u32 slotid, u32 value) +{ + struct xhci_db *db = GET_LOWFLAT(xhci->db); + u32 addr = (u32)(&db[slotid].doorbell); + pci_writel(addr, value); +} + +static void xhci_process_events(struct usb_xhci_s *xhci) +{ + struct xhci_ring *evts = GET_LOWFLAT(xhci->evts); + + for (;;) { + /* check for event */ + u32 nidx = GET_LOWFLAT(evts->nidx); + u32 cs = GET_LOWFLAT(evts->cs); + struct xhci_trb *etrb = evts->ring + nidx; + u32 control = GET_LOWFLAT(etrb->control); + if ((control & TRB_C) != (cs ? 1 : 0)) + return; + + /* process event */ + u32 evt_type = TRB_TYPE(control); + u32 evt_cc = (GET_LOWFLAT(etrb->status) >> 24) & 0xff; + switch (evt_type) { + case ER_TRANSFER: + case ER_COMMAND_COMPLETE: + { + struct xhci_trb *rtrb = (void*)GET_LOWFLAT(etrb->ptr_low); + struct xhci_ring *ring = XHCI_RING(rtrb); + struct xhci_trb *evt = &ring->evt; + u32 eidx = rtrb - ring->ring + 1; + dprintf(5, "%s: ring %p [trb %p, evt %p, type %d, eidx %d, cc %d]\n", + __func__, ring, rtrb, evt, evt_type, eidx, evt_cc); + memcpy_fl(evt, etrb, sizeof(*etrb)); + SET_LOWFLAT(ring->eidx, eidx); + break; + } + case ER_PORT_STATUS_CHANGE: + { + u32 portid = (GET_LOWFLAT(etrb->ptr_low) >> 24) & 0xff; + dprintf(3, "%s: status change port #%d\n", + __func__, portid); + break; + } + default: + dprintf(1, "%s: unknown event, type %d, cc %d\n", + __func__, evt_type, evt_cc); + break; + } + + /* move ring index, notify xhci */ + nidx++; + if (nidx == XHCI_RING_ITEMS) { + nidx = 0; + cs = cs ? 0 : 1; + SET_LOWFLAT(evts->cs, cs); + } + SET_LOWFLAT(evts->nidx, nidx); + struct xhci_ir *ir = GET_LOWFLAT(xhci->ir); + u32 addr = (u32)(&ir->erdp_low); + u32 erdp = (u32)(evts->ring + nidx); + pci_writel(addr, erdp); + } +} + +static int xhci_ring_busy(struct xhci_ring *ring) +{ + u32 eidx = GET_LOWFLAT(ring->eidx); + u32 nidx = GET_LOWFLAT(ring->nidx); + return (eidx != nidx); +} + +static int xhci_event_wait(struct usb_xhci_s *xhci, + struct xhci_ring *ring, + u32 timeout) +{ + u32 end = timer_calc(timeout); + + for (;;) { + xhci_process_events(xhci); + if (!xhci_ring_busy(ring)) { + u32 status = GET_LOWFLAT(ring->evt.status); + return (status >> 24) & 0xff; + } + if (timer_check(end)) { + warn_timeout(); + return -1; + } + yield(); + } +} + +static void xhci_trb_queue(struct xhci_ring *ring, + struct xhci_trb *trb) +{ + u32 nidx = GET_LOWFLAT(ring->nidx); + u32 cs = GET_LOWFLAT(ring->cs); + struct xhci_trb *dst; + u32 control; + + if (nidx == XHCI_RING_ITEMS-1) { + dst = ring->ring + nidx; + control = (TR_LINK << 10); // trb type + control |= TRB_LK_TC; + control |= (cs ? TRB_C : 0); + SET_LOWFLAT(dst->ptr_low, (u32)&ring[0]); + SET_LOWFLAT(dst->ptr_high, 0); + SET_LOWFLAT(dst->status, 0); + SET_LOWFLAT(dst->control, control); + nidx = 0; + cs = cs ? 0 : 1; + SET_LOWFLAT(ring->nidx, nidx); + SET_LOWFLAT(ring->cs, cs); + + dprintf(5, "%s: ring %p [linked]\n", __func__, ring); + } + + dst = ring->ring + nidx; + control = GET_LOWFLAT(trb->control) | (cs ? TRB_C : 0); + + SET_LOWFLAT(dst->ptr_low, GET_LOWFLAT(trb->ptr_low)); + SET_LOWFLAT(dst->ptr_high, GET_LOWFLAT(trb->ptr_high)); + SET_LOWFLAT(dst->status, GET_LOWFLAT(trb->status)); + SET_LOWFLAT(dst->control, control); + nidx++; + SET_LOWFLAT(ring->nidx, nidx); + + dprintf(5, "%s: ring %p [nidx %d, len %d]\n", + __func__, ring, nidx, + GET_LOWFLAT(trb->status) & 0xffff); +} + +static void xhci_xfer_queue(struct xhci_pipe *pipe, + struct xhci_trb *trb) +{ + xhci_trb_queue(&pipe->reqs, trb); +} + +static void xhci_xfer_kick(struct xhci_pipe *pipe) +{ + struct xhci_device *dev = GET_LOWFLAT(pipe->dev); + struct usb_xhci_s *xhci = GET_LOWFLAT(dev->xhci); + u32 slotid = GET_LOWFLAT(dev->slotid); + u32 epid = GET_LOWFLAT(pipe->epid); + + dprintf(5, "%s: ring %p, slotid %d, epid %d\n", + __func__, &pipe->reqs, slotid, epid); + xhci_doorbell(xhci, slotid, epid); +} + +static void xhci_xfer_normal(struct xhci_pipe *pipe, + void *data, int datalen) +{ + struct xhci_trb trb; + + memset(&trb, 0, sizeof(trb)); + trb.ptr_low = (u32)data; + trb.status = datalen; + trb.control |= (TR_NORMAL << 10); // trb type + trb.control |= TRB_TR_IOC; + + xhci_xfer_queue(pipe, MAKE_FLATPTR(GET_SEG(SS), &trb)); + xhci_xfer_kick(pipe); +} + +// -------------------------------------------------------------- +// internal functions, pure 32bit + +static int wait_bit(u32 *reg, u32 mask, int value, u32 timeout) +{ + ASSERT32FLAT(); + u32 end = timer_calc(timeout); + + while ((readl(reg) & mask) != value) { + if (timer_check(end)) { + warn_timeout(); + return -1; + } + yield(); + } + return 0; +} + +static int xhci_cmd_submit(struct usb_xhci_s *xhci, + struct xhci_trb *cmd) +{ + ASSERT32FLAT(); + int rc; + + mutex_lock(&xhci->cmds->lock); + xhci_trb_queue(xhci->cmds, cmd); + xhci_doorbell(xhci, 0, 0); + rc = xhci_event_wait(xhci, xhci->cmds, 1000); + mutex_unlock(&xhci->cmds->lock); + return rc; +} + +static int xhci_cmd_enable_slot(struct usb_xhci_s *xhci) +{ + ASSERT32FLAT(); + struct xhci_trb cmd = { + .ptr_low = 0, + .ptr_high = 0, + .status = 0, + .control = (CR_ENABLE_SLOT << 10) + }; + dprintf(3, "%s:\n", __func__); + int cc = xhci_cmd_submit(xhci, &cmd); + if (cc != CC_SUCCESS) + return -1; + return (xhci->cmds->evt.control >> 24) & 0xff; +} + +static int xhci_cmd_disable_slot(struct xhci_device *dev) +{ + ASSERT32FLAT(); + struct xhci_trb cmd = { + .ptr_low = 0, + .ptr_high = 0, + .status = 0, + .control = (dev->slotid << 24) | (CR_DISABLE_SLOT << 10) + }; + dprintf(3, "%s: slotid %d\n", __func__, dev->slotid); + return xhci_cmd_submit(dev->xhci, &cmd); +} + +static int xhci_cmd_address_device(struct xhci_device *dev) +{ + ASSERT32FLAT(); + struct xhci_trb cmd = { + .ptr_low = (u32)&dev->inctx, + .ptr_high = 0, + .status = 0, + .control = (dev->slotid << 24) | (CR_ADDRESS_DEVICE << 10) + }; + dprintf(3, "%s: slotid %d\n", __func__, dev->slotid); + return xhci_cmd_submit(dev->xhci, &cmd); +} + +static int xhci_cmd_configure_endpoint(struct xhci_device *dev) +{ + ASSERT32FLAT(); + struct xhci_trb cmd = { + .ptr_low = (u32)&dev->inctx, + .ptr_high = 0, + .status = 0, + .control = (dev->slotid << 24) | (CR_CONFIGURE_ENDPOINT << 10) + }; + dprintf(3, "%s: slotid %d, add 0x%x, del 0x%x\n", __func__, + dev->slotid, dev->inctx.add, dev->inctx.del); + return xhci_cmd_submit(dev->xhci, &cmd); +} + +static int xhci_cmd_evaluate_context(struct xhci_device *dev) +{ + ASSERT32FLAT(); + struct xhci_trb cmd = { + .ptr_low = (u32)&dev->inctx, + .ptr_high = 0, + .status = 0, + .control = (dev->slotid << 24) | (CR_EVALUATE_CONTEXT << 10) + }; + dprintf(3, "%s: slotid %d, add 0x%x, del 0x%x\n", __func__, + dev->slotid, dev->inctx.add, dev->inctx.del); + return xhci_cmd_submit(dev->xhci, &cmd); +} + +static void xhci_xfer_setup(struct xhci_pipe *pipe, + const struct usb_ctrlrequest *req, + int dir, int datalen) +{ + ASSERT32FLAT(); + struct xhci_trb trb; + + memset(&trb, 0, sizeof(trb)); + trb.ptr_low |= req->bRequestType; + trb.ptr_low |= (req->bRequest) << 8; + trb.ptr_low |= (req->wValue) << 16; + trb.ptr_high |= req->wIndex; + trb.ptr_high |= (req->wLength) << 16; + trb.status |= 8; // length + trb.control |= (TR_SETUP << 10); // trb type + trb.control |= TRB_TR_IDT; + if (datalen) + trb.control |= (dir ? 3 : 2) << 16; // transfer type + xhci_xfer_queue(pipe, &trb); +} + +static void xhci_xfer_data(struct xhci_pipe *pipe, + int dir, void *data, int datalen) +{ + ASSERT32FLAT(); + struct xhci_trb trb; + + memset(&trb, 0, sizeof(trb)); + trb.ptr_low = (u32)data; + trb.status = datalen; + trb.control |= (TR_DATA << 10); // trb type + if (dir) + trb.control |= (1 << 16); + xhci_xfer_queue(pipe, &trb); +} + +static void xhci_xfer_status(struct xhci_pipe *pipe, int dir) +{ + ASSERT32FLAT(); + struct xhci_trb trb; + + memset(&trb, 0, sizeof(trb)); + trb.control |= (TR_STATUS << 10); // trb type + trb.control |= TRB_TR_IOC; + if (dir) + trb.control |= (1 << 16); + + xhci_xfer_queue(pipe, &trb); + xhci_xfer_kick(pipe); +} + +static struct xhci_device *xhci_find_alloc_device(struct usb_xhci_s *xhci, + struct usbdevice_s *usbdev) +{ + ASSERT32FLAT(); + struct xhci_device *dev; + + for (dev = xhci->list; dev != NULL; dev = dev->next) { + if (dev->usbdev == usbdev) { + return dev; + } + } + + dev = memalign_low(64, sizeof(*dev)); + if (!dev) { + warn_noalloc(); + return NULL; + } + memset(dev, 0, sizeof(*dev)); + dev->usbdev = usbdev; + dev->xhci = xhci; + dev->next = xhci->list; + xhci->list = dev; + return dev; +} + +static void +configure_xhci(void *data) +{ + ASSERT32FLAT(); + struct usb_xhci_s *xhci = data; + u32 reg; + + xhci->devs = memalign_high(64, sizeof(*xhci->devs) * (xhci->slots + 1)); + xhci->eseg = memalign_high(64, sizeof(*xhci->eseg)); + xhci->cmds = memalign_high(XHCI_RING_SIZE, sizeof(*xhci->cmds)); + xhci->evts = memalign_low(XHCI_RING_SIZE, sizeof(*xhci->evts)); + if (!xhci->devs || !xhci->cmds || !xhci->evts || !xhci->eseg) { + warn_noalloc(); + goto fail; + } + memset(xhci->devs, 0, sizeof(*xhci->devs) * (xhci->slots + 1)); + memset(xhci->cmds, 0, sizeof(*xhci->cmds)); + memset(xhci->evts, 0, sizeof(*xhci->evts)); + memset(xhci->eseg, 0, sizeof(*xhci->eseg)); + + reg = readl(&xhci->op->usbcmd); + if (reg & XHCI_CMD_RS) { + reg &= ~XHCI_CMD_RS; + writel(&xhci->op->usbcmd, reg); + if (wait_bit(&xhci->op->usbsts, XHCI_STS_HCH, XHCI_STS_HCH, 32) != 0) + goto fail; + } + + dprintf(3, "%s: resetting\n", __func__); + writel(&xhci->op->usbcmd, XHCI_CMD_HCRST); + if (wait_bit(&xhci->op->usbcmd, XHCI_CMD_HCRST, 0, 100) != 0) + goto fail; + if (wait_bit(&xhci->op->usbsts, XHCI_STS_CNR, 0, 100) != 0) + goto fail; + + writel(&xhci->op->config, xhci->slots); + writel(&xhci->op->dcbaap_low, (u32)xhci->devs); + writel(&xhci->op->dcbaap_high, 0); + writel(&xhci->op->crcr_low, (u32)xhci->cmds | 1); + writel(&xhci->op->crcr_high, 0); + xhci->cmds->cs = 1; + + xhci->eseg->ptr_low = (u32)xhci->evts; + xhci->eseg->ptr_high = 0; + xhci->eseg->size = XHCI_RING_ITEMS; + writel(&xhci->ir->erstsz, 1); + writel(&xhci->ir->erdp_low, (u32)xhci->evts); + writel(&xhci->ir->erdp_high, 0); + writel(&xhci->ir->erstba_low, (u32)xhci->eseg); + writel(&xhci->ir->erstba_high, 0); + xhci->evts->cs = 1; + + reg = readl(&xhci->op->usbcmd); + reg |= XHCI_CMD_RS; + writel(&xhci->op->usbcmd, reg); + + // FIXME: try find a more elegant way than a fixed delay + mdelay(100); + + usb_enumerate(&xhci->hub); + if (xhci->hub.devcount) + return; + + // No devices found - shutdown and free controller. + dprintf(1, "XHCI no devices found\n"); + reg = readl(&xhci->op->usbcmd); + reg &= ~XHCI_CMD_RS; + writel(&xhci->op->usbcmd, reg); + wait_bit(&xhci->op->usbsts, XHCI_STS_HCH, XHCI_STS_HCH, 32); + +fail: + free(xhci->eseg); + free(xhci->evts); + free(xhci->cmds); + free(xhci->devs); + free(xhci); +} + +// -------------------------------------------------------------- +// xhci root hub + +// Check if device attached to port +static void +xhci_print_port_state(int loglevel, const char *prefix, u32 port, u32 portsc) +{ + ASSERT32FLAT(); + u32 pls = xhci_get_field(portsc, XHCI_PORTSC_PLS); + u32 speed = xhci_get_field(portsc, XHCI_PORTSC_SPEED); + + dprintf(loglevel, "%s port #%d: 0x%08x,%s%s pls %d, speed %d [%s]\n", + prefix, port + 1, portsc, + (portsc & XHCI_PORTSC_PP) ? " powered," : "", + (portsc & XHCI_PORTSC_PED) ? " enabled," : "", + pls, speed, speed_name[speed]); +} + +static int +xhci_hub_detect(struct usbhub_s *hub, u32 port) +{ + ASSERT32FLAT(); + struct usb_xhci_s *xhci = container_of(hub->cntl, struct usb_xhci_s, usb); + u32 portsc = readl(&xhci->pr[port].portsc); + + xhci_print_port_state(3, __func__, port, portsc); + switch (xhci_get_field(portsc, XHCI_PORTSC_PLS)) { + case PLS_U0: + case PLS_POLLING: + return 0; + default: + return -1; + } +} + +// Reset device on port +static int +xhci_hub_reset(struct usbhub_s *hub, u32 port) +{ + ASSERT32FLAT(); + struct usb_xhci_s *xhci = container_of(hub->cntl, struct usb_xhci_s, usb); + u32 portsc = readl(&xhci->pr[port].portsc); + int rc; + + switch (xhci_get_field(portsc, XHCI_PORTSC_PLS)) { + case PLS_U0: + rc = speed_from_xhci[xhci_get_field(portsc, XHCI_PORTSC_SPEED)]; + break; + case PLS_POLLING: + xhci_print_port_state(3, __func__, port, portsc); + portsc |= XHCI_PORTSC_PR; + writel(&xhci->pr[port].portsc, portsc); + if (wait_bit(&xhci->pr[port].portsc, XHCI_PORTSC_PED, XHCI_PORTSC_PED, 100) != 0) + return -1; + portsc = readl(&xhci->pr[port].portsc); + rc = speed_from_xhci[xhci_get_field(portsc, XHCI_PORTSC_SPEED)]; + break; + default: + rc = -1; + break; + } + + xhci_print_port_state(1, "XHCI", port, portsc); + return rc; +} + +static void +xhci_hub_disconnect(struct usbhub_s *hub, u32 port) +{ + ASSERT32FLAT(); + struct usb_xhci_s *xhci = container_of(hub->cntl, struct usb_xhci_s, usb); + struct xhci_device *dev; + + for (dev = xhci->list; dev != NULL; dev = dev->next) { + if (dev->usbdev->hub == hub && + dev->usbdev->port == port && + dev->slotid != 0) { + xhci_cmd_disable_slot(dev); + return; + } + } +} + +static struct usbhub_op_s xhci_hub_ops = { + .detect = xhci_hub_detect, + .reset = xhci_hub_reset, + .disconnect = xhci_hub_disconnect, +}; + +// -------------------------------------------------------------- +// external interface + +struct usb_pipe * +xhci_alloc_pipe(struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc) +{ + ASSERT32FLAT(); + if (!CONFIG_USB_XHCI) + return NULL; + u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + struct usb_xhci_s *xhci = container_of( + usbdev->hub->cntl, struct usb_xhci_s, usb); + struct xhci_pipe *pipe; + u32 epid; + + if (epdesc->bEndpointAddress == 0) { + epid = 1; + } else { + epid = (epdesc->bEndpointAddress & 0x0f) * 2; + epid += (epdesc->bEndpointAddress & USB_DIR_IN) ? 1 : 0; + } + + if (eptype == USB_ENDPOINT_XFER_CONTROL) + pipe = memalign_high(XHCI_RING_SIZE, sizeof(*pipe)); + else + pipe = memalign_low(XHCI_RING_SIZE, sizeof(*pipe)); + if (!pipe) { + warn_noalloc(); + return NULL; + } + memset(pipe, 0, sizeof(*pipe)); + + usb_desc2pipe(&pipe->pipe, usbdev, epdesc); + pipe->dev = xhci_find_alloc_device(xhci, usbdev); + if (!pipe->dev) { + free(pipe); + return NULL; + } + pipe->epid = epid; + pipe->reqs.cs = 1; + if (eptype == USB_ENDPOINT_XFER_INT) + pipe->buf = malloc_low(pipe->pipe.maxpacket); + + dprintf(3, "%s: usbdev %p, ring %p, slotid %d, epid %d\n", __func__, + usbdev, &pipe->reqs, pipe->dev->slotid, pipe->epid); + if (pipe->epid > 1 && pipe->dev->slotid) { + struct xhci_inctx *in = &pipe->dev->inctx; + in->add = (1 << pipe->epid) | 1; + in->del = 0; + + in->slot.ctx[0] |= (31 << 27); // context entries + + int e = pipe->epid-1; + in->ep[e].ctx[1] |= (eptype << 3); + if (epdesc->bEndpointAddress & USB_DIR_IN) + in->ep[e].ctx[1] |= (1 << 5); + in->ep[e].ctx[1] |= (pipe->pipe.maxpacket << 16); + in->ep[e].deq_low = (u32)&pipe->reqs.ring[0]; + in->ep[e].deq_low |= 1; // dcs + in->ep[e].deq_high = 0; + in->ep[e].length = pipe->pipe.maxpacket; + + int cc = xhci_cmd_configure_endpoint(pipe->dev); + if (cc != CC_SUCCESS) { + dprintf(1, "%s: configure endpoint: failed (cc %d)\n", __func__, cc); + free(pipe); + return NULL; + } + } + + return &pipe->pipe; +} + +struct usb_pipe * +xhci_update_pipe(struct usbdevice_s *usbdev, struct usb_pipe *upipe + , struct usb_endpoint_descriptor *epdesc) +{ + ASSERT32FLAT(); + if (!CONFIG_USB_XHCI) + return NULL; + u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + struct xhci_pipe *pipe = container_of(upipe, struct xhci_pipe, pipe); + dprintf(3, "%s: usbdev %p, ring %p, slotid %d, epid %d\n", __func__, + usbdev, &pipe->reqs, pipe->dev->slotid, pipe->epid); + if (eptype == USB_ENDPOINT_XFER_CONTROL && + pipe->pipe.maxpacket != epdesc->wMaxPacketSize) { + dprintf(1, "%s: reconf ctl endpoint pkt size: %d -> %d\n", + __func__, pipe->pipe.maxpacket, epdesc->wMaxPacketSize); + pipe->pipe.maxpacket = epdesc->wMaxPacketSize; + struct xhci_inctx *in = &pipe->dev->inctx; + in->add = (1 << 1); + in->del = 0; + in->ep[0].ctx[1] &= 0xffff; + in->ep[0].ctx[1] |= (pipe->pipe.maxpacket << 16); + int cc = xhci_cmd_evaluate_context(pipe->dev); + if (cc != CC_SUCCESS) { + dprintf(1, "%s: reconf ctl endpoint: failed (cc %d)\n", + __func__, cc); + } + } + return upipe; +} + +int +xhci_control(struct usb_pipe *p, int dir, const void *cmd, int cmdsize + , void *data, int datalen) +{ + ASSERT32FLAT(); + if (!CONFIG_USB_XHCI) + return -1; + const struct usb_ctrlrequest *req = cmd; + struct xhci_pipe *pipe = container_of(p, struct xhci_pipe, pipe); + struct usb_xhci_s *xhci = pipe->dev->xhci; + int cc; + + if (req->bRequest == USB_REQ_SET_ADDRESS) { + int slotid = xhci_cmd_enable_slot(xhci); + if (slotid < 0) { + dprintf(1, "%s: enable slot: failed\n", __func__); + return -1; + } + dprintf(3, "%s: enable slot: got slotid %d\n", __func__, slotid); + pipe->dev->slotid = slotid; + xhci->devs[slotid].ptr_low = (u32)&pipe->dev->devctx; + xhci->devs[slotid].ptr_high = 0; + + struct usbdevice_s *usbdev = pipe->dev->usbdev; + u32 route = 0; + while (usbdev->hub->usbdev) { + route <<= 4; + route |= (usbdev->port+1) & 0xf; + usbdev = usbdev->hub->usbdev; + } + dprintf(3, "%s: root port %d, route 0x%x\n", + __func__, usbdev->port+1, route); + + struct xhci_inctx *in = &pipe->dev->inctx; + in->add = 0x03; + in->slot.ctx[0] |= (1 << 27); // context entries + in->slot.ctx[0] |= speed_to_xhci[pipe->dev->usbdev->speed] << 20; + in->slot.ctx[0] |= route; + in->slot.ctx[1] |= (usbdev->port+1) << 16; + /* TODO ctx0: hub bit */ + /* TODO ctx1: hub ports */ + + in->ep[0].ctx[0] |= (3 << 16); // interval: 1ms + in->ep[0].ctx[1] |= (4 << 3); // control pipe + in->ep[0].ctx[1] |= (speed_to_ctlsize[pipe->dev->usbdev->speed] << 16); + + in->ep[0].deq_low = (u32)&pipe->reqs.ring[0]; + in->ep[0].deq_low |= 1; // dcs + in->ep[0].deq_high = 0; + in->ep[0].length = 8; + + cc = xhci_cmd_address_device(pipe->dev); + if (cc != CC_SUCCESS) { + dprintf(1, "%s: address device: failed (cc %d)\n", __func__, cc); + return -1; + } + return 0; + } + + xhci_xfer_setup(pipe, req, dir, datalen); + if (datalen) + xhci_xfer_data(pipe, dir, data, datalen); + xhci_xfer_status(pipe, dir); + + cc = xhci_event_wait(xhci, &pipe->reqs, 1000); + if (cc != CC_SUCCESS) { + dprintf(1, "%s: control xfer failed (cc %d)\n", __func__, cc); + return -1; + } + + return 0; +} + +int +xhci_send_bulk(struct usb_pipe *p, int dir, void *data, int datalen) +{ + if (!CONFIG_USB_XHCI) + return -1; + + struct xhci_pipe *pipe = container_of(p, struct xhci_pipe, pipe); + struct xhci_device *dev = GET_LOWFLAT(pipe->dev); + struct usb_xhci_s *xhci = GET_LOWFLAT(dev->xhci); + + xhci_xfer_normal(pipe, data, datalen); + int cc = xhci_event_wait(xhci, &pipe->reqs, 1000); + if (cc != CC_SUCCESS) { + dprintf(1, "%s: bulk xfer failed (cc %d)\n", __func__, cc); + return -1; + } + return 0; +} + +int +xhci_poll_intr(struct usb_pipe *p, void *data) +{ + if (!CONFIG_USB_XHCI) + return -1; + + struct xhci_pipe *pipe = container_of(p, struct xhci_pipe, pipe); + struct xhci_device *dev = GET_LOWFLAT(pipe->dev); + struct usb_xhci_s *xhci = GET_LOWFLAT(dev->xhci); + u32 len = GET_LOWFLAT(pipe->pipe.maxpacket); + void *buf = GET_LOWFLAT(pipe->buf); + int bufused = GET_LOWFLAT(pipe->bufused); + + if (!bufused) { + xhci_xfer_normal(pipe, buf, len); + bufused = 1; + SET_LOWFLAT(pipe->bufused, bufused); + return -1; + } + + xhci_process_events(xhci); + if (xhci_ring_busy(&pipe->reqs)) + return -1; + dprintf(5, "%s: st %x ct %x [ %p <= %p / %d ]\n", __func__, + GET_LOWFLAT(pipe->reqs.evt.status), + GET_LOWFLAT(pipe->reqs.evt.control), + MAKE_FLATPTR(GET_SEG(SS), data), buf, len); + memcpy_fl(MAKE_FLATPTR(GET_SEG(SS), data), buf, len); + xhci_xfer_normal(pipe, buf, len); + return 0; +} + +int +xhci_setup(struct pci_device *pci, int busid) +{ + ASSERT32FLAT(); + if (!CONFIG_USB_XHCI) + return -1; + + struct usb_xhci_s *xhci = malloc_low(sizeof(*xhci)); + if (!xhci) { + warn_noalloc(); + return -1; + } + memset(xhci, 0, sizeof(*xhci)); + + xhci->baseaddr = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0) + & PCI_BASE_ADDRESS_MEM_MASK; + xhci->caps = (void*)(xhci->baseaddr); + xhci->op = (void*)(xhci->baseaddr + readb(&xhci->caps->caplength)); + xhci->pr = (void*)(xhci->baseaddr + readb(&xhci->caps->caplength) + 0x400); + xhci->db = (void*)(xhci->baseaddr + readl(&xhci->caps->dboff)); + xhci->ir = (void*)(xhci->baseaddr + readl(&xhci->caps->rtsoff) + 0x20); + + u32 hcs1 = readl(&xhci->caps->hcsparams1); + u32 hcc = readl(&xhci->caps->hccparams); + xhci->ports = (hcs1 >> 24) & 0xff; + xhci->slots = hcs1 & 0xff; + xhci->xcap = ((hcc >> 16) & 0xffff) << 2; + + xhci->usb.busid = busid; + xhci->usb.pci = pci; + xhci->usb.type = USB_TYPE_XHCI; + xhci->hub.cntl = &xhci->usb; + xhci->hub.portcount = xhci->ports; + xhci->hub.op = &xhci_hub_ops; + + dprintf(1, "XHCI init on dev %02x:%02x.%x: regs @ %p, %d ports, %d slots\n" + , pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf) + , pci_bdf_to_fn(pci->bdf), xhci->caps + , xhci->ports, xhci->slots); + + if (xhci->xcap) { + u32 off, addr = xhci->baseaddr + xhci->xcap; + do { + struct xhci_xcap *xcap = (void*)addr; + u32 ports, name, cap = readl(&xcap->cap); + switch (cap & 0xff) { + case 0x02: + name = readl(&xcap->data[0]); + ports = readl(&xcap->data[1]); + dprintf(1, "XHCI protocol %c%c%c%c %x.%02x, %d ports (offset %d)\n" + , (name >> 0) & 0xff + , (name >> 8) & 0xff + , (name >> 16) & 0xff + , (name >> 24) & 0xff + , (cap >> 24) & 0xff + , (cap >> 16) & 0xff + , (ports >> 8) & 0xff + , (ports >> 0) & 0xff); + break; + default: + dprintf(1, "XHCI extcap 0x%x @ %x\n", cap & 0xff, addr); + break; + } + off = (cap >> 8) & 0xff; + addr += off << 2; + } while (off > 0); + } + + pci_config_maskw(pci->bdf, PCI_COMMAND, 0, PCI_COMMAND_MASTER); + + run_thread(configure_xhci, xhci); + return 0; +} diff --git a/src/usb-xhci.h b/src/usb-xhci.h new file mode 100644 index 0000000..64ee82c --- /dev/null +++ b/src/usb-xhci.h @@ -0,0 +1,144 @@ +#ifndef __USB_XHCI_H +#define __USB_XHCI_H + +struct usbdevice_s; +struct usb_endpoint_descriptor; +struct usb_pipe; + +// -------------------------------------------------------------- + +// usb-xhci.c +int xhci_setup(struct pci_device *pci, int busid); +struct usb_pipe *xhci_alloc_pipe(struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc); +struct usb_pipe *xhci_update_pipe(struct usbdevice_s *usbdev + , struct usb_pipe *pipe + , struct usb_endpoint_descriptor *epdesc); +int xhci_control(struct usb_pipe *p, int dir, const void *cmd, int cmdsize + , void *data, int datasize); +int xhci_send_bulk(struct usb_pipe *p, int dir, void *data, int datasize); +int xhci_poll_intr(struct usb_pipe *p, void *data); + +// -------------------------------------------------------------- +// register interface + +// capabilities +struct xhci_caps { + u8 caplength; + u8 reserved_01; + u16 hciversion; + u32 hcsparams1; + u32 hcsparams2; + u32 hcsparams3; + u32 hccparams; + u32 dboff; + u32 rtsoff; +} PACKED; + +// extended capabilities +struct xhci_xcap { + u32 cap; + u32 data[]; +} PACKED; + +// operational registers +struct xhci_op { + u32 usbcmd; + u32 usbsts; + u32 pagesize; + u32 reserved_01[2]; + u32 dnctl; + u32 crcr_low; + u32 crcr_high; + u32 reserved_02[4]; + u32 dcbaap_low; + u32 dcbaap_high; + u32 config; +} PACKED; + +// port registers +struct xhci_pr { + u32 portsc; + u32 portpmsc; + u32 portli; + u32 reserved_01; +} PACKED; + +// doorbell registers +struct xhci_db { + u32 doorbell; +} PACKED; + +// runtime registers +struct xhci_rts { + u32 mfindex; +} PACKED; + +// interrupter registers +struct xhci_ir { + u32 iman; + u32 imod; + u32 erstsz; + u32 reserved_01; + u32 erstba_low; + u32 erstba_high; + u32 erdp_low; + u32 erdp_high; +} PACKED; + +// -------------------------------------------------------------- +// memory data structs + +// slot context +struct xhci_slotctx { + u32 ctx[4]; + u32 reserved_01[4]; +} PACKED; + +// endpoint context +struct xhci_epctx { + u32 ctx[2]; + u32 deq_low; + u32 deq_high; + u32 length; + u32 reserved_01[3]; +} PACKED; + +// device context +struct xhci_devctx { + struct xhci_slotctx slot; + struct xhci_epctx ep[31]; +} PACKED; + +// device context array element +struct xhci_devlist { + u32 ptr_low; + u32 ptr_high; +} PACKED; + +// input context +struct xhci_inctx { + u32 del; + u32 add; + u32 reserved_01[6]; + struct xhci_slotctx slot; + struct xhci_epctx ep[31]; +} PACKED; + +// transfer block (ring element) +struct xhci_trb { + u32 ptr_low; + u32 ptr_high; + u32 status; + u32 control; +} PACKED; + +// event ring segment +struct xhci_er_seg { + u32 ptr_low; + u32 ptr_high; + u32 size; + u32 reserved_01; +} PACKED; + +#endif // usb-xhci.h diff --git a/src/usb.c b/src/usb.c index 903dd78..e67ef88 100644 --- a/src/usb.c +++ b/src/usb.c @@ -12,6 +12,7 @@ #include "usb-uhci.h" // uhci_setup #include "usb-ohci.h" // ohci_setup #include "usb-ehci.h" // ehci_setup +#include "usb-xhci.h" // xhci_setup #include "usb-hid.h" // usb_keyboard_setup #include "usb-hub.h" // usb_hub_setup #include "usb-msc.h" // usb_msc_setup @@ -37,6 +38,8 @@ usb_alloc_pipe(struct usbdevice_s *usbdev return ohci_alloc_pipe(usbdev, epdesc); case USB_TYPE_EHCI: return ehci_alloc_pipe(usbdev, epdesc); + case USB_TYPE_XHCI: + return xhci_alloc_pipe(usbdev, epdesc); } }
@@ -46,6 +49,8 @@ usb_update_pipe(struct usbdevice_s *usbdev, struct usb_pipe *pipe , struct usb_endpoint_descriptor *epdesc) { switch (usbdev->hub->cntl->type) { + case USB_TYPE_XHCI: + return xhci_update_pipe(usbdev, pipe, epdesc); default: free_pipe(pipe); return usb_alloc_pipe(usbdev, epdesc); @@ -66,6 +71,8 @@ send_control(struct usb_pipe *pipe, int dir, const void *cmd, int cmdsize return ohci_control(pipe, dir, cmd, cmdsize, data, datasize); case USB_TYPE_EHCI: return ehci_control(pipe, dir, cmd, cmdsize, data, datasize); + case USB_TYPE_XHCI: + return xhci_control(pipe, dir, cmd, cmdsize, data, datasize); } }
@@ -80,6 +87,8 @@ usb_send_bulk(struct usb_pipe *pipe_fl, int dir, void *data, int datasize) return ohci_send_bulk(pipe_fl, dir, data, datasize); case USB_TYPE_EHCI: return ehci_send_bulk(pipe_fl, dir, data, datasize); + case USB_TYPE_XHCI: + return xhci_send_bulk(pipe_fl, dir, data, datasize); } }
@@ -94,6 +103,8 @@ usb_poll_intr(struct usb_pipe *pipe_fl, void *data) return ohci_poll_intr(pipe_fl, data); case USB_TYPE_EHCI: return ehci_poll_intr(pipe_fl, data); + case USB_TYPE_XHCI: + return xhci_poll_intr(pipe_fl, data); } }
@@ -467,5 +478,7 @@ usb_setup(void) uhci_setup(pci, count++); else if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_OHCI) ohci_setup(pci, count++); + else if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_XHCI) + xhci_setup(pci, count++); } } diff --git a/src/usb.h b/src/usb.h index d9eadd7..a034aa6 100644 --- a/src/usb.h +++ b/src/usb.h @@ -60,15 +60,17 @@ struct usbhub_op_s { void (*disconnect)(struct usbhub_s *hub, u32 port); };
-#define USB_TYPE_UHCI 1 -#define USB_TYPE_OHCI 2 -#define USB_TYPE_EHCI 3 +#define USB_TYPE_UHCI 1 +#define USB_TYPE_OHCI 2 +#define USB_TYPE_EHCI 3 +#define USB_TYPE_XHCI 4
-#define USB_FULLSPEED 0 -#define USB_LOWSPEED 1 -#define USB_HIGHSPEED 2 +#define USB_FULLSPEED 0 +#define USB_LOWSPEED 1 +#define USB_HIGHSPEED 2 +#define USB_SUPERSPEED 3
-#define USB_MAXADDR 127 +#define USB_MAXADDR 127
/****************************************************************
On Wed, Aug 21, 2013 at 03:20:21PM +0200, Gerd Hoffmann wrote:
xhci needs them even after completing device initialization. xhci must to walk up the chain to the root port and the usbdevs (of usb hubs) are part of it.
The hub's usbdev isn't freed until all of its ports have been configured. The only place I see the hub chain walked is in an xhci set-address command - but that command would only be run during the configuration when all the hub ports are still available. So, I don't understand why this change is necessary.
Also, would it be simpler to cache the route and hub speed during the pipe allocation instead of calculating it during the set-address command? This is what the ehci code does.
-Kevin
On Wed, Aug 21, 2013 at 03:20:22PM +0200, Gerd Hoffmann wrote:
Preparation for better xhci support: allows to notify host controllers instead of going through a free+alloc cycle.
Signed-off-by: Gerd Hoffmann kraxel@redhat.com
src/usb.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/src/usb.c b/src/usb.c index 808f426..903dd78 100644 --- a/src/usb.c +++ b/src/usb.c @@ -40,6 +40,18 @@ usb_alloc_pipe(struct usbdevice_s *usbdev } }
+// Update an pipe (used for control only) +struct usb_pipe * +usb_update_pipe(struct usbdevice_s *usbdev, struct usb_pipe *pipe
, struct usb_endpoint_descriptor *epdesc)+{
- switch (usbdev->hub->cntl->type) {
- default:
free_pipe(pipe);return usb_alloc_pipe(usbdev, epdesc);- }
+}
// Send a message on a control pipe using the default control descriptor. static int send_control(struct usb_pipe *pipe, int dir, const void *cmd, int cmdsize @@ -258,7 +270,6 @@ usb_set_address(struct usbdevice_s *usbdev) req.wIndex = 0; req.wLength = 0; int ret = send_default_control(usbdev->defpipe, &req, NULL);
- free_pipe(usbdev->defpipe); if (ret) return -1;
This leaks a pipe in the error case. Leaking a pipe would be very bad as it would leave memory that the controller can DMA into that an OS may use. (Pipes can be allocated with "tmphigh" ram which is not reserved from the OS after POST.)
[...]
@@ -372,9 +382,10 @@ usb_hub_port_setup(void *data)
// Configure the device int count = configure_usb_device(usbdev);
- free_pipe(usbdev->defpipe);
- if (!count)
- if (!count) {
free_pipe(usbdev->defpipe); hub->op->disconnect(hub, port);- } hub->devcount += count;
done: hub->threads--;
This leaks the hub pipe if any of its ports are used.
-Kevin
On Do, 2013-08-29 at 08:15 -0400, Kevin O'Connor wrote:
On Wed, Aug 21, 2013 at 03:20:21PM +0200, Gerd Hoffmann wrote:
xhci needs them even after completing device initialization. xhci must to walk up the chain to the root port and the usbdevs (of usb hubs) are part of it.
The hub's usbdev isn't freed until all of its ports have been configured. The only place I see the hub chain walked is in an xhci set-address command - but that command would only be run during the configuration when all the hub ports are still available. So, I don't understand why this change is necessary.
I'll recheck. There was another reason for this patch, which is obsoleted now by patch 3/4 which wasn't there initially.
cheers, Gerd
On Thu, Aug 29, 2013 at 08:22:57AM -0400, Kevin O'Connor wrote:
On Wed, Aug 21, 2013 at 03:20:22PM +0200, Gerd Hoffmann wrote:
Preparation for better xhci support: allows to notify host controllers instead of going through a free+alloc cycle.
Thinking about this further, can the xhci_alloc_pipe() code just check if the requested pipe was recently free'd (by scanning the free list) and then reuse it (by calling xhci_alloc_pipe itself)? If so, it wouldn't require changes to the usb.c code and it wouldn't introduce any leak scenarios.
-Kevin
On Do, 2013-08-29 at 22:53 -0400, Kevin O'Connor wrote:
On Thu, Aug 29, 2013 at 08:22:57AM -0400, Kevin O'Connor wrote:
On Wed, Aug 21, 2013 at 03:20:22PM +0200, Gerd Hoffmann wrote:
Preparation for better xhci support: allows to notify host controllers instead of going through a free+alloc cycle.
Thinking about this further, can the xhci_alloc_pipe() code just check if the requested pipe was recently free'd (by scanning the free list) and then reuse it (by calling xhci_alloc_pipe itself)?
I had it that way. Didn't like it much. One problem is that we can't drop patch #1 then. I think I'll prefer plugging the leaks.
cheers, Gerd
-
Gerd Hoffmann -
Kevin O'Connor