Re: [SeaBIOS] usb boot issue

[Kevin O'Connor]

On Thu, Oct 13, 2011 at 03:56:48PM +0200, Wolfgang Kamp - datakamp wrote:
> Hi,
>
> is there any solution for the usb boot issue of the AMD SB800 Persimmon platform
> with SeaBIOS 1.6.3 and actual Coreboot version?

I'm unfamiliar with the issue.  Can you post the SeaBIOS debug output
along with a description of the issue you are seeing?

-Kevin

[coreboot] usb boot issue

[Scott Duplichan]

Kevin O'Connor wrote:

]On Thu, Oct 13, 2011 at 03:56:48PM +0200, Wolfgang Kamp - datakamp wrote:
]> 
]> Hi,
]> 
]> is there any solution for the usb boot issue of the AMD SB800 Persimmon
]platform
]> with SeaBIOS 1.6.3 and actual Coreboot version?
]
]I'm unfamiliar with the issue.  Can you post the SeaBIOS debug output
]along with a description of the issue you are seeing?

This might be a coreboot problem and not a SeaBIOS problem. See:
http://www.mail-archive.com/[e-mail]/msg31922.html

Wolfgang could try reverting the suspect coreboot patch and see
if it solves the problem. The change was a NIC fix I believe.
I think Marc had proposed an alternative NIC fix that could be
tried if the existing one really is causing the usb problem.

]-Kevin

usb boot issue

[She, Kerry]

> -----Original Message-----
> From: seabios-bounces+kerry.she=[e-mail] [mailto:seabios-
> bounces+kerry.she=[e-mail]] On Behalf Of Kevin O'Connor
> Sent: Friday, October 14, 2011 7:15 AM
> To: Wolfgang Kamp - datakamp
> Cc: [e-mail]; [e-mail]
> Subject: Re: [SeaBIOS] usb boot issue
>
> On Thu, Oct 13, 2011 at 03:56:48PM +0200, Wolfgang Kamp - datakamp

wrote:
> > Hi,
> >
> > is there any solution for the usb boot issue of the AMD SB800

Persimmon
> platform
> > with SeaBIOS 1.6.3 and actual Coreboot version?
>
> I'm unfamiliar with the issue.  Can you post the SeaBIOS debug output
> along with a description of the issue you are seeing?

I got the similar problem with seabios commit 8a161c9f5
I'm using a EHCI CDROM drive, I have a simple test on sb700 and sb800
platform.
After boot to Linux OS, the Ehci CDROM drive can works fine.
I suspect whether the seabios ehci driver is full support EHCI device?

Following text is the seabios log with log level 3.
Thanks

SeaBIOS (version pre-0.6.3-20111014_111147-Debian-vg0)

init usb
EHCI init on dev 00:12.2 (regs=0xfe105420)
/7ffd2000\ Start thread
/7ffd1000\ Start thread
/7ffd0000\ Start thread
/7ffcf000\ Start thread
/7ffce000\ Start thread
/7ffcd000\ Start thread
/7ffcc000\ Start thread
EHCI init on dev 00:13.2 (regs=0xfe105520)
/7ffca000\ Start thread
/7ffc9000\ Start thread
/7ffc8000\ Start thread
/7ffc7000\ Start thread
/7ffc6000\ Start thread
/7ffc5000\ Start thread
/7ffc4000\ Start thread
OHCI init on dev 00:14.5 (regs=0xfe104000)
/7ffc3000\ Start thread
init ps2port
/7ffc2000\ Start thread
|7ffc2000| Searching CBFS for prefix etc/ps2-keyboard-spinup
init lpt
Found 0 lpt ports
init serial
Found 1 serial ports
init floppy drives
init hard drives
ATA controller 1 at 1020/1040/0 (irq 0 dev 88)
/7ffc1000\ Start thread
\7ffc1000/ End thread
ATA controller 2 at 1028/1044/0 (irq 0 dev 88)
/7ffc1000\ Start thread
\7ffc1000/ End thread
ATA controller 3 at 1f0/3f4/0 (irq 14 dev a1)
/7ffc1000\ Start thread
\7ffc1000/ End thread
ATA controller 4 at 170/374/0 (irq 15 dev a1)
/7ffc1000\ Start thread
\7ffc1000/ End thread
init ahci
Searching CBFS for prefix img/
Searching CBFS for prefix floppyimg/
\7ffd1000/ End thread
\7ffcf000/ End thread
\7ffce000/ End thread
\7ffcd000/ End thread
\7ffcc000/ End thread
\7ffc9000/ End thread
\7ffc8000/ End thread
\7ffc7000/ End thread
\7ffc6000/ End thread
\7ffc4000/ End thread
/7ffd1000\ Start thread
\7ffd1000/ End thread
/7ffd1000\ Start thread
\7ffd1000/ End thread
\7ffc3000/ End thread
|7ffc2000| Got ps2 nak (status=51)
|7ffc2000| ps2 command 2ff failed (aux=0)
\7ffc2000/ End thread
|7ffd0000| set_address 0x7ffd37a0
|7ffd0000| config_usb: 0x7ffd343c
|7ffc5000| OHCI init on dev 00:13.0 (regs=0xfe102000)
/7ffd1000\ Start thread
|7ffc5000| OHCI init on dev 00:13.1 (regs=0xfe103000)
/7ffcf000\ Start thread
\7ffc5000/ End thread
\7ffca000/ End thread
/7ffce000\ Start thread
\7ffce000/ End thread
/7ffce000\ Start thread
\7ffce000/ End thread
/7ffce000\ Start thread
\7ffce000/ End thread
\7ffd1000/ End thread
/7ffd1000\ Start thread
\7ffd1000/ End thread
/7ffd1000\ Start thread
/7ffce000\ Start thread
\7ffce000/ End thread
|7ffd1000| set_address 0x7ffd33c0
|7ffd1000| config_usb: 0x7ffd34f0
|7ffd1000| device rev=0110 cls=00 sub=00 proto=00 size=40
|7ffd1000| usb_hid_init 0x7ffd34f0
|7ffd1000| ebda moved from 9fc00 to 9f800
|7ffd1000| USB mouse initialized
\7ffd1000/ End thread
\7ffcf000/ End thread
|7ffd0000| WARNING - Timeout at ehci_wait_qh:316!
\7ffd0000/ End thread
\7ffd2000/ End thread
All threads complete.
> -Kevin
>
> SeaBIOS mailing list
> [e-mail]
> http://www.seabios.org/mailman/listinfo/seabios

usb boot issue

[Kevin O'Connor]

On Fri, Oct 14, 2011 at 12:25:45PM +0800, She, Kerry wrote:
> > > is there any solution for the usb boot issue of the AMD SB800
>
> Persimmon
> > platform
> > > with SeaBIOS 1.6.3 and actual Coreboot version?
> >
> > I'm unfamiliar with the issue.  Can you post the SeaBIOS debug output
> > along with a description of the issue you are seeing?
>
> I got the similar problem with seabios commit 8a161c9f5
> I'm using a EHCI CDROM drive, I have a simple test on sb700 and sb800
> platform.
> After boot to Linux OS, the Ehci CDROM drive can works fine.
> I suspect whether the seabios ehci driver is full support EHCI device?
>
> Following text is the seabios log with log level 3.
> Thanks
>
> SeaBIOS (version pre-0.6.3-20111014_111147-Debian-vg0)

[...]
> |7ffd0000| WARNING - Timeout at ehci_wait_qh:316!

There were several EHCI bug fixes committed to seabios git a few weeks
back.  There is a good chance these bugfixes may resolve your issue.
Can you retest?

-Kevin