Re: [SeaBIOS] How to boot USB 3.0 devices with SeaBIOS

[diffusae]

Hello!

On 01.10.2017 02:07, Kevin O'Connor wrote:
> That's an unusual failure.  Can you recompile seabios with the debug
> level set to 5, reproduce, and forward the log?  Then also provide a
> log with a boot when the USB 3 drive is not plugged in.  Finally,
> please provide the output from "lsusb -t" and "lsusb".

To reproduce I've disconnected all other USB devices.
With the drive plugged in, there is no USB 3 hub after boot.
If there is no drive plugged in, than the timeout warning goes away:

|bfeab000| WARNING - Timeout at xhci_event_wait:735!

The drive is recognized at the USB 2 port on boot.

That's a bit odd.

Thanks again

Best regards,
Reiner