[SeaBIOS] [PATCH seabios 2/3] kvmtool: allow mmio for legacy bar 0

[Gerd Hoffmann]

kvmtool uses MMIO not IO bar for legacy virtio.  Doesn't match spec.
But easy to handle given we have the code anyway for virtio 1.0 which
allows both MMIO and IO.

Signed-off-by: Gerd Hoffmann 
---
 src/hw/virtio-pci.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/src/hw/virtio-pci.c b/src/hw/virtio-pci.c
index 96f9c6b012..1a3acc9962 100644
--- a/src/hw/virtio-pci.c
+++ b/src/hw/virtio-pci.c
@@ -488,10 +488,18 @@ void vp_init_simple(struct vp_device *vp, struct pci_device *pci)
     } else {
         dprintf(1, "pci dev %pP using legacy (0.9.5) virtio mode\n", pci);
         vp->legacy.bar = 0;
-        vp->legacy.ioaddr = pci_enable_iobar(pci, PCI_BASE_ADDRESS_0);
-        if (!vp->legacy.ioaddr)
-            return;
-        vp->legacy.mode = VP_ACCESS_IO;
+        addr = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0);
+        if (addr & PCI_BASE_ADDRESS_SPACE_IO) {
+            vp->legacy.ioaddr = addr & PCI_BASE_ADDRESS_IO_MASK;
+            if (!vp->legacy.ioaddr)
+                return;
+            vp->legacy.mode = VP_ACCESS_IO;
+        } else {
+            vp->legacy.ioaddr = addr & PCI_BASE_ADDRESS_MEM_MASK;
+            if (!vp->legacy.ioaddr)
+                return;
+            vp->legacy.mode = VP_ACCESS_MMIO;
+        }
     }

vp_reset(vp);