Each hotplug-able memory slot is a DimmDevice. All DimmDevices are attached to a new bus called DimmBus. This bus is introduced so that we no longer depend on hotplug-capability of main system bus (the main bus does not allow hotplugging). The DimmBus should be attached to a chipset Device (i440fx in case of the pc)
A hot-add operation for a particular dimm: - creates a new DimmDevice and attaches it to the DimmBus - creates a new MemoryRegion of the given physical address offset, size and node proximity, and attaches it to main system memory as a sub_region.
A successful hot-remove operation detaches and frees the MemoryRegion from system memory, and removes the DimmDevice from the DimmBus.
Hotplug operations are done through normal device_add /device_del commands. Also add properties to DimmDevice.
Signed-off-by: Vasilis Liaskovitis vasilis.liaskovitis@profitbricks.com --- hw/dimm.c | 305 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/dimm.h | 90 ++++++++++++++++++ 2 files changed, 395 insertions(+), 0 deletions(-) create mode 100644 hw/dimm.c create mode 100644 hw/dimm.h
diff --git a/hw/dimm.c b/hw/dimm.c new file mode 100644 index 0000000..288b997 --- /dev/null +++ b/hw/dimm.c @@ -0,0 +1,305 @@ +/* + * Dimm device for Memory Hotplug + * + * Copyright ProfitBricks GmbH 2012 + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see http://www.gnu.org/licenses/ + */ + +#include "trace.h" +#include "qdev.h" +#include "dimm.h" +#include <time.h> +#include "../exec-memory.h" +#include "qmp-commands.h" + +/* the system-wide memory bus. */ +static DimmBus *main_memory_bus; +/* the following list is used to hold dimm config info before machine + * initialization. After machine init, the list is emptied and not used anymore.*/ +static DimmConfiglist dimmconfig_list = QTAILQ_HEAD_INITIALIZER(dimmconfig_list); + +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent); +static char *dimmbus_get_fw_dev_path(DeviceState *dev); + +static Property dimm_properties[] = { + DEFINE_PROP_UINT64("start", DimmDevice, start, 0), + DEFINE_PROP_UINT64("size", DimmDevice, size, DEFAULT_DIMMSIZE), + DEFINE_PROP_UINT32("node", DimmDevice, node, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent) +{ +} + +static char *dimmbus_get_fw_dev_path(DeviceState *dev) +{ + char path[40]; + + snprintf(path, sizeof(path), "%s", qdev_fw_name(dev)); + return strdup(path); +} + +static void dimm_bus_class_init(ObjectClass *klass, void *data) +{ + BusClass *k = BUS_CLASS(klass); + + k->print_dev = dimmbus_dev_print; + k->get_fw_dev_path = dimmbus_get_fw_dev_path; +} + +static void dimm_bus_initfn(Object *obj) +{ + DimmConfig *dimm_cfg, *next_dimm_cfg; + DimmBus *bus = DIMM_BUS(obj); + QTAILQ_INIT(&bus->dimmconfig_list); + QTAILQ_INIT(&bus->dimmlist); + + QTAILQ_FOREACH_SAFE(dimm_cfg, &dimmconfig_list, nextdimmcfg, next_dimm_cfg) { + QTAILQ_REMOVE(&dimmconfig_list, dimm_cfg, nextdimmcfg); + QTAILQ_INSERT_TAIL(&bus->dimmconfig_list, dimm_cfg, nextdimmcfg); + } +} + +static const TypeInfo dimm_bus_info = { + .name = TYPE_DIMM_BUS, + .parent = TYPE_BUS, + .instance_size = sizeof(DimmBus), + .instance_init = dimm_bus_initfn, + .class_init = dimm_bus_class_init, +}; + +void main_memory_bus_create(Object *parent) +{ + main_memory_bus = g_malloc0(dimm_bus_info.instance_size); + main_memory_bus->qbus.glib_allocated = true; + qbus_create_inplace(&main_memory_bus->qbus, TYPE_DIMM_BUS, DEVICE(parent), + "membus"); +} + +static void dimm_populate(DimmDevice *s) +{ + DeviceState *dev= (DeviceState*)s; + MemoryRegion *new = NULL; + + new = g_malloc(sizeof(MemoryRegion)); + memory_region_init_ram(new, dev->id, s->size); + vmstate_register_ram_global(new); + memory_region_add_subregion(get_system_memory(), s->start, new); + s->mr = new; +} + +static void dimm_depopulate(DimmDevice *s) +{ + assert(s); + vmstate_unregister_ram(s->mr, NULL); + memory_region_del_subregion(get_system_memory(), s->mr); + memory_region_destroy(s->mr); + s->mr = NULL; +} + +void dimm_config_create(char *id, uint64_t size, uint64_t node, uint32_t + dimm_idx, uint32_t populated) +{ + DimmConfig *dimm_cfg; + dimm_cfg = (DimmConfig*) g_malloc0(sizeof(DimmConfig)); + dimm_cfg->name = id; + dimm_cfg->idx = dimm_idx; + dimm_cfg->start = 0; + dimm_cfg->size = size; + dimm_cfg->node = node; + dimm_cfg->populated = populated; + + QTAILQ_INSERT_TAIL(&dimmconfig_list, dimm_cfg, nextdimmcfg); +} + +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev) +{ + DimmBus *bus = main_memory_bus; + bus->qbus.allow_hotplug = 1; + bus->dimm_hotplug_qdev = qdev; + bus->dimm_hotplug = hotplug; +} + +static void dimm_plug_device(DimmDevice *slot) +{ + DimmBus *bus = main_memory_bus; + + dimm_populate(slot); + if (bus->dimm_hotplug) + bus->dimm_hotplug(bus->dimm_hotplug_qdev, slot, 1); +} + +static int dimm_unplug_device(DeviceState *qdev) +{ + DimmBus *bus = main_memory_bus; + + if (bus->dimm_hotplug) + bus->dimm_hotplug(bus->dimm_hotplug_qdev, DIMM(qdev), 0); + return 1; +} + +static DimmConfig *dimmcfg_find_from_name(const char *name) +{ + DimmConfig *slot; + DimmBus *bus = main_memory_bus; + + QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) { + if (!strcmp(slot->name, name)) { + return slot; + } + } + return NULL; +} + +static DimmDevice *dimm_find_from_idx(uint32_t idx) +{ + DimmDevice *slot; + DimmBus *bus = main_memory_bus; + + QTAILQ_FOREACH(slot, &bus->dimmlist, nextdimm) { + if (slot->idx == idx) { + return slot; + } + } + return NULL; +} + +/* used to create a dimm device, only on incoming migration of a hotplugged + * RAMBlock + */ +int dimm_add(char *id) +{ + DimmConfig *slotcfg = NULL; + QemuOpts *devopts; + char buf[256]; + + if (!id) { + fprintf(stderr, "ERROR %s invalid id\n",__FUNCTION__); + return 1; + } + + slotcfg = dimmcfg_find_from_name(id); + + if (!slotcfg) { + fprintf(stderr, "%s no slot %s found\n", __FUNCTION__, id); + return 1; + } + + devopts = qemu_opts_create(qemu_find_opts("device"), id, 0, NULL); + qemu_opt_set(devopts, "driver", "dimm"); + + snprintf(buf, sizeof(buf), "%lu", slotcfg->size); + qemu_opt_set(devopts, "size", buf); + snprintf(buf, sizeof(buf), "%u", slotcfg->node); + qemu_opt_set(devopts, "node", buf); + qdev_device_add(devopts); + + return 0; +} + +/* used to calculate physical address offsets for all dimms */ +void dimm_calc_offsets(dimm_calcoffset_fn calcfn) +{ + DimmConfig *slot; + QTAILQ_FOREACH(slot, &dimmconfig_list, nextdimmcfg) { + if (!slot->start) { + slot->start = calcfn(slot->size); + } + } +} + +void setup_fwcfg_hp_dimms(uint64_t *fw_cfg_slots) +{ + DimmConfig *slot; + + QTAILQ_FOREACH(slot, &dimmconfig_list, nextdimmcfg) { + assert(slot->start); + fw_cfg_slots[3 * slot->idx] = cpu_to_le64(slot->start); + fw_cfg_slots[3 * slot->idx + 1] = cpu_to_le64(slot->size); + fw_cfg_slots[3 * slot->idx + 2] = cpu_to_le64(slot->node); + } +} + +void dimm_notify(uint32_t idx, uint32_t event) +{ + DimmBus *bus = main_memory_bus; + DimmDevice *s; + s = dimm_find_from_idx(idx); + assert(s != NULL); + + switch(event) { + case DIMM_REMOVE_SUCCESS: + dimm_depopulate(s); + qdev_simple_unplug_cb((DeviceState*)s); + QTAILQ_REMOVE(&bus->dimmlist, s, nextdimm); + break; + default: + break; + } +} + +static int dimm_init(DeviceState *s) +{ + DimmBus *bus = main_memory_bus; + DimmDevice *slot; + DimmConfig *slotcfg; + + slot = DIMM(s); + slot->mr = NULL; + + slotcfg = dimmcfg_find_from_name(s->id); + + if (!slotcfg) { + fprintf(stderr, "%s no config for slot %s found\n", + __FUNCTION__, s->id); + return 1; + } + + slot->idx = slotcfg->idx; + assert(slotcfg->start); + slot->start = slotcfg->start; + slot->size = slotcfg->size; + slot->node = slotcfg->node; + + QTAILQ_INSERT_TAIL(&bus->dimmlist, slot, nextdimm); + dimm_plug_device(slot); + + return 0; +} + + +static void dimm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->props = dimm_properties; + dc->unplug = dimm_unplug_device; + dc->init = dimm_init; +} + +static TypeInfo dimm_info = { + .name = TYPE_DIMM, + .parent = TYPE_DEVICE, + .instance_size = sizeof(DimmDevice), + .class_init = dimm_class_init, +}; + +static void dimm_register_types(void) +{ + type_register_static(&dimm_bus_info); + type_register_static(&dimm_info); +} + +type_init(dimm_register_types) diff --git a/hw/dimm.h b/hw/dimm.h new file mode 100644 index 0000000..5e991a6 --- /dev/null +++ b/hw/dimm.h @@ -0,0 +1,90 @@ +#ifndef QEMU_DIMM_H +#define QEMU_DIMM_H + +#include "qemu-common.h" +#include "memory.h" +#include "sysbus.h" +#include "qapi-types.h" +#include "qemu-queue.h" +#include "cpus.h" +#define MAX_DIMMS 255 +#define DIMM_BITMAP_BYTES (MAX_DIMMS + 7) / 8 +#define DEFAULT_DIMMSIZE 1024*1024*1024 + +typedef enum { + DIMM_REMOVE_SUCCESS = 0, + DIMM_REMOVE_FAIL = 1, + DIMM_ADD_SUCCESS = 2, + DIMM_ADD_FAIL = 3 +} dimm_hp_result_code; + +#define TYPE_DIMM "dimm" +#define DIMM(obj) \ + OBJECT_CHECK(DimmDevice, (obj), TYPE_DIMM) +#define DIMM_CLASS(klass) \ + OBJECT_CLASS_CHECK(DimmDeviceClass, (klass), TYPE_DIMM) +#define DIMM_GET_CLASS(obj) \ + OBJECT_GET_CLASS(DimmDeviceClass, (obj), TYPE_DIMM) + +typedef struct DimmDevice DimmDevice; +typedef QTAILQ_HEAD(DimmConfiglist, DimmConfig) DimmConfiglist; + +typedef struct DimmDeviceClass { + DeviceClass parent_class; + + int (*init)(DimmDevice *dev); +} DimmDeviceClass; + +typedef struct DimmDevice { + DeviceState qdev; + uint32_t idx; /* index in memory hotplug register/bitmap */ + ram_addr_t start; /* starting physical address */ + ram_addr_t size; + uint32_t node; /* numa node proximity */ + MemoryRegion *mr; /* MemoryRegion for this slot. !NULL only if populated */ + QTAILQ_ENTRY (DimmDevice) nextdimm; +} DimmDevice; + +typedef struct DimmConfig +{ + const char *name; + uint32_t idx; /* index in memory hotplug register/bitmap */ + ram_addr_t start; /* starting physical address */ + ram_addr_t size; + uint32_t node; /* numa node proximity */ + uint32_t populated; /* 1 means device has been hotplugged. Default is 0. */ + QTAILQ_ENTRY (DimmConfig) nextdimmcfg; +} DimmConfig; + +typedef int (*dimm_hotplug_fn)(DeviceState *qdev, DimmDevice *dev, int add); +typedef target_phys_addr_t (*dimm_calcoffset_fn)(uint64_t size); + +#define TYPE_DIMM_BUS "dimmbus" +#define DIMM_BUS(obj) OBJECT_CHECK(DimmBus, (obj), TYPE_DIMM_BUS) + +typedef struct DimmBus { + BusState qbus; + DeviceState *dimm_hotplug_qdev; + dimm_hotplug_fn dimm_hotplug; + dimm_calcoffset_fn dimm_calcoffset; + DimmConfiglist dimmconfig_list; + QTAILQ_HEAD(Dimmlist, DimmDevice) dimmlist; +} DimmBus; + +struct dimm_hp_result { + const char *dimmname; + dimm_hp_result_code ret; + QTAILQ_ENTRY (dimm_hp_result) next; +}; + +void dimm_calc_offsets(dimm_calcoffset_fn calcfn); +void dimm_notify(uint32_t idx, uint32_t event); +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev); +void setup_fwcfg_hp_dimms(uint64_t *fw_cfg_slots); +int dimm_add(char *id); +void main_memory_bus_create(Object *parent); +void dimm_config_create(char *id, uint64_t size, uint64_t node, + uint32_t dimm_idx, uint32_t populated); + + +#endif