On Wed, Dec 23, 2009 at 02:48:24PM -0500, Kevin O'Connor wrote:
On Wed, Dec 23, 2009 at 08:45:07PM +0200, Gleb Natapov wrote:
On Wed, Dec 23, 2009 at 01:11:43PM -0500, Kevin O'Connor wrote:
Why only increase the allocated storage for intsrc by 16? The loop above seems like it could add a large number of entries.
Unfortunately we have to allocate all memory in advance. The table can have max 4 entries per device (one entry for each pin), so 16 is enough for 4 devices.
Yeah - I suppose the table could be built in temp space and then copied into the f-segment when the actual size is known.
Yes, and this is not the only table that needs it. Lets assume 16 entries for now for simplicity.
Also, the foreachpci() macro will iterate over every PCI function - there could be 8 functions to a pci device which could lead to duplicates in the table (two pci functions on the same device could use the same irq pin).
Yes, correct. Need to rework this loop.
Sounds like it should find every function 0 pci entry and then loop over the four possible pins?
Each function connected only to one pin. It needs to loop over all function on a device and record pins that it creates entry for. If the same pin is used by more then one function of a device the record will be checked and second entry will not be created.
-- Gleb.