From: David Woodhouse David.Woodhouse@intel.com
This is under a BSD licence so it's fine to import directly.
Not-yet-signed-off-by: David Woodhouse David.Woodhouse@intel.com --- src/LegacyBios.h | 965 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 965 insertions(+) create mode 100644 src/LegacyBios.h
diff --git a/src/LegacyBios.h b/src/LegacyBios.h new file mode 100644 index 0000000..65ace3b --- /dev/null +++ b/src/LegacyBios.h @@ -0,0 +1,965 @@ +/** @file + The EFI Legacy BIOS Protocol is used to abstract legacy Option ROM usage + under EFI and Legacy OS boot. This file also includes all the related + COMPATIBILIY16 structures and defintions. + + Note: The names for EFI_IA32_REGISTER_SET elements were picked to follow + well known naming conventions. + + Thunk is the code that switches from 32-bit protected environment into the 16-bit real-mode + environment. Reverse thunk is the code that does the opposite. + +Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR> +This program and the accompanying materials are licensed and made available under +the terms and conditions of the BSD License that accompanies this distribution. +The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php. + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This protocol is defined in Framework for EFI Compatibility Support Module spec + Version 0.97. + +**/ + +#ifndef _EFI_LEGACY_BIOS_H_ +#define _EFI_LEGACY_BIOS_H_ + +/// +/// +/// +#pragma pack(1) + +typedef UINT8 SERIAL_MODE; +typedef UINT8 PARALLEL_MODE; + +#define EFI_COMPATIBILITY16_TABLE_SIGNATURE SIGNATURE_32 ('I', 'F', 'E', '$') + +/// +/// There is a table located within the traditional BIOS in either the 0xF000:xxxx or 0xE000:xxxx +/// physical address range. It is located on a 16-byte boundary and provides the physical address of the +/// entry point for the Compatibility16 functions. These functions provide the platform-specific +/// information that is required by the generic EfiCompatibility code. The functions are invoked via +/// thunking by using EFI_LEGACY_BIOS_PROTOCOL.FarCall86() with the 32-bit physical +/// entry point. +/// +typedef struct { + /// + /// The string "$EFI" denotes the start of the EfiCompatibility table. Byte 0 is "I," byte + /// 1 is "F," byte 2 is "E," and byte 3 is "$" and is normally accessed as a DWORD or UINT32. + /// + UINT32 Signature; + + /// + /// The value required such that byte checksum of TableLength equals zero. + /// + UINT8 TableChecksum; + + /// + /// The length of this table. + /// + UINT8 TableLength; + + /// + /// The major EFI revision for which this table was generated. + /// + UINT8 EfiMajorRevision; + + /// + /// The minor EFI revision for which this table was generated. + /// + UINT8 EfiMinorRevision; + + /// + /// The major revision of this table. + /// + UINT8 TableMajorRevision; + + /// + /// The minor revision of this table. + /// + UINT8 TableMinorRevision; + + /// + /// Reserved for future usage. + /// + UINT16 Reserved; + + /// + /// The segment of the entry point within the traditional BIOS for Compatibility16 functions. + /// + UINT16 Compatibility16CallSegment; + + /// + /// The offset of the entry point within the traditional BIOS for Compatibility16 functions. + /// + UINT16 Compatibility16CallOffset; + + /// + /// The segment of the entry point within the traditional BIOS for EfiCompatibility + /// to invoke the PnP installation check. + /// + UINT16 PnPInstallationCheckSegment; + + /// + /// The Offset of the entry point within the traditional BIOS for EfiCompatibility + /// to invoke the PnP installation check. + /// + UINT16 PnPInstallationCheckOffset; + + /// + /// EFI system resources table. Type EFI_SYSTEM_TABLE is defined in the IntelPlatform + ///Innovation Framework for EFI Driver Execution Environment Core Interface Specification (DXE CIS). + /// + UINT32 EfiSystemTable; + + /// + /// The address of an OEM-provided identifier string. The string is null terminated. + /// + UINT32 OemIdStringPointer; + + /// + /// The 32-bit physical address where ACPI RSD PTR is stored within the traditional + /// BIOS. The remained of the ACPI tables are located at their EFI addresses. The size + /// reserved is the maximum for ACPI 2.0. The EfiCompatibility will fill in the ACPI + /// RSD PTR with either the ACPI 1.0b or 2.0 values. + /// + UINT32 AcpiRsdPtrPointer; + + /// + /// The OEM revision number. Usage is undefined but provided for OEM module usage. + /// + UINT16 OemRevision; + + /// + /// The 32-bit physical address where INT15 E820 data is stored within the traditional + /// BIOS. The EfiCompatibility code will fill in the E820Pointer value and copy the + /// data to the indicated area. + /// + UINT32 E820Pointer; + + /// + /// The length of the E820 data and is filled in by the EfiCompatibility code. + /// + UINT32 E820Length; + + /// + /// The 32-bit physical address where the $PIR table is stored in the traditional BIOS. + /// The EfiCompatibility code will fill in the IrqRoutingTablePointer value and + /// copy the data to the indicated area. + /// + UINT32 IrqRoutingTablePointer; + + /// + /// The length of the $PIR table and is filled in by the EfiCompatibility code. + /// + UINT32 IrqRoutingTableLength; + + /// + /// The 32-bit physical address where the MP table is stored in the traditional BIOS. + /// The EfiCompatibility code will fill in the MpTablePtr value and copy the data + /// to the indicated area. + /// + UINT32 MpTablePtr; + + /// + /// The length of the MP table and is filled in by the EfiCompatibility code. + /// + UINT32 MpTableLength; + + /// + /// The segment of the OEM-specific INT table/code. + /// + UINT16 OemIntSegment; + + /// + /// The offset of the OEM-specific INT table/code. + /// + UINT16 OemIntOffset; + + /// + /// The segment of the OEM-specific 32-bit table/code. + /// + UINT16 Oem32Segment; + + /// + /// The offset of the OEM-specific 32-bit table/code. + /// + UINT16 Oem32Offset; + + /// + /// The segment of the OEM-specific 16-bit table/code. + /// + UINT16 Oem16Segment; + + /// + /// The offset of the OEM-specific 16-bit table/code. + /// + UINT16 Oem16Offset; + + /// + /// The segment of the TPM binary passed to 16-bit CSM. + /// + UINT16 TpmSegment; + + /// + /// The offset of the TPM binary passed to 16-bit CSM. + /// + UINT16 TpmOffset; + + /// + /// A pointer to a string identifying the independent BIOS vendor. + /// + UINT32 IbvPointer; + + /// + /// This field is NULL for all systems not supporting PCI Express. This field is the base + /// value of the start of the PCI Express memory-mapped configuration registers and + /// must be filled in prior to EfiCompatibility code issuing the Compatibility16 function + /// Compatibility16InitializeYourself(). + /// Compatibility16InitializeYourself() is defined in Compatability16 + /// Functions. + /// + UINT32 PciExpressBase; + + /// + /// Maximum PCI bus number assigned. + /// + UINT8 LastPciBus; +} EFI_COMPATIBILITY16_TABLE; + +/// +/// Functions provided by the CSM binary which communicate between the EfiCompatibility +/// and Compatability16 code. +/// +/// Inconsistent with the specification here: +/// The member's name started with "Compatibility16" [defined in Intel Framework +/// Compatibility Support Module Specification / 0.97 version] +/// has been changed to "Legacy16" since keeping backward compatible. +/// +typedef enum { + /// + /// Causes the Compatibility16 code to do any internal initialization required. + /// Input: + /// AX = Compatibility16InitializeYourself + /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_INIT_TABLE + /// Return: + /// AX = Return Status codes + /// + Legacy16InitializeYourself = 0x0000, + + /// + /// Causes the Compatibility16 BIOS to perform any drive number translations to match the boot sequence. + /// Input: + /// AX = Compatibility16UpdateBbs + /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE + /// Return: + /// AX = Returned status codes + /// + Legacy16UpdateBbs = 0x0001, + + /// + /// Allows the Compatibility16 code to perform any final actions before booting. The Compatibility16 + /// code is read/write. + /// Input: + /// AX = Compatibility16PrepareToBoot + /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE structure + /// Return: + /// AX = Returned status codes + /// + Legacy16PrepareToBoot = 0x0002, + + /// + /// Causes the Compatibility16 BIOS to boot. The Compatibility16 code is Read/Only. + /// Input: + /// AX = Compatibility16Boot + /// Output: + /// AX = Returned status codes + /// + Legacy16Boot = 0x0003, + + /// + /// Allows the Compatibility16 code to get the last device from which a boot was attempted. This is + /// stored in CMOS and is the priority number of the last attempted boot device. + /// Input: + /// AX = Compatibility16RetrieveLastBootDevice + /// Output: + /// AX = Returned status codes + /// BX = Priority number of the boot device. + /// + Legacy16RetrieveLastBootDevice = 0x0004, + + /// + /// Allows the Compatibility16 code rehook INT13, INT18, and/or INT19 after dispatching a legacy OpROM. + /// Input: + /// AX = Compatibility16DispatchOprom + /// ES:BX = Pointer to EFI_DISPATCH_OPROM_TABLE + /// Output: + /// AX = Returned status codes + /// BX = Number of non-BBS-compliant devices found. Equals 0 if BBS compliant. + /// + Legacy16DispatchOprom = 0x0005, + + /// + /// Finds a free area in the 0xFxxxx or 0xExxxx region of the specified length and returns the address + /// of that region. + /// Input: + /// AX = Compatibility16GetTableAddress + /// BX = Allocation region + /// 00 = Allocate from either 0xE0000 or 0xF0000 64 KB blocks. + /// Bit 0 = 1 Allocate from 0xF0000 64 KB block + /// Bit 1 = 1 Allocate from 0xE0000 64 KB block + /// CX = Requested length in bytes. + /// DX = Required address alignment. Bit mapped. First non-zero bit from the right is the alignment. + /// Output: + /// AX = Returned status codes + /// DS:BX = Address of the region + /// + Legacy16GetTableAddress = 0x0006, + + /// + /// Enables the EfiCompatibility module to do any nonstandard processing of keyboard LEDs or state. + /// Input: + /// AX = Compatibility16SetKeyboardLeds + /// CL = LED status. + /// Bit 0 Scroll Lock 0 = Off + /// Bit 1 NumLock + /// Bit 2 Caps Lock + /// Output: + /// AX = Returned status codes + /// + Legacy16SetKeyboardLeds = 0x0007, + + /// + /// Enables the EfiCompatibility module to install an interrupt handler for PCI mass media devices that + /// do not have an OpROM associated with them. An example is SATA. + /// Input: + /// AX = Compatibility16InstallPciHandler + /// ES:BX = Pointer to EFI_LEGACY_INSTALL_PCI_HANDLER structure + /// Output: + /// AX = Returned status codes + /// + Legacy16InstallPciHandler = 0x0008 +} EFI_COMPATIBILITY_FUNCTIONS; + + +/// +/// EFI_DISPATCH_OPROM_TABLE +/// +typedef struct { + UINT16 PnPInstallationCheckSegment; ///< A pointer to the PnpInstallationCheck data structure. + UINT16 PnPInstallationCheckOffset; ///< A pointer to the PnpInstallationCheck data structure. + UINT16 OpromSegment; ///< The segment where the OpROM was placed. Offset is assumed to be 3. + UINT8 PciBus; ///< The PCI bus. + UINT8 PciDeviceFunction; ///< The PCI device * 0x08 | PCI function. + UINT8 NumberBbsEntries; ///< The number of valid BBS table entries upon entry and exit. The IBV code may + ///< increase this number, if BBS-compliant devices also hook INTs in order to force the + ///< OpROM BIOS Setup to be executed. + UINT32 BbsTablePointer; ///< A pointer to the BBS table. + UINT16 RuntimeSegment; ///< The segment where the OpROM can be relocated to. If this value is 0x0000, this + ///< means that the relocation of this run time code is not supported. + ///< Inconsistent with specification here: + ///< The member's name "OpromDestinationSegment" [defined in Intel Framework Compatibility Support Module Specification / 0.97 version] + ///< has been changed to "RuntimeSegment" since keeping backward compatible. + +} EFI_DISPATCH_OPROM_TABLE; + +/// +/// EFI_TO_COMPATIBILITY16_INIT_TABLE +/// +typedef struct { + /// + /// Starting address of memory under 1 MB. The ending address is assumed to be 640 KB or 0x9FFFF. + /// + UINT32 BiosLessThan1MB; + + /// + /// The starting address of the high memory block. + /// + UINT32 HiPmmMemory; + + /// + /// The length of high memory block. + /// + UINT32 HiPmmMemorySizeInBytes; + + /// + /// The segment of the reverse thunk call code. + /// + UINT16 ReverseThunkCallSegment; + + /// + /// The offset of the reverse thunk call code. + /// + UINT16 ReverseThunkCallOffset; + + /// + /// The number of E820 entries copied to the Compatibility16 BIOS. + /// + UINT32 NumberE820Entries; + + /// + /// The amount of usable memory above 1 MB, e.g., E820 type 1 memory. + /// + UINT32 OsMemoryAbove1Mb; + + /// + /// The start of thunk code in main memory. Memory cannot be used by BIOS or PMM. + /// + UINT32 ThunkStart; + + /// + /// The size of the thunk code. + /// + UINT32 ThunkSizeInBytes; + + /// + /// Starting address of memory under 1 MB. + /// + UINT32 LowPmmMemory; + + /// + /// The length of low Memory block. + /// + UINT32 LowPmmMemorySizeInBytes; +} EFI_TO_COMPATIBILITY16_INIT_TABLE; + +/// +/// DEVICE_PRODUCER_SERIAL. +/// +typedef struct { + UINT16 Address; ///< I/O address assigned to the serial port. + UINT8 Irq; ///< IRQ assigned to the serial port. + SERIAL_MODE Mode; ///< Mode of serial port. Values are defined below. +} DEVICE_PRODUCER_SERIAL; + +/// +/// DEVICE_PRODUCER_SERIAL's modes. +///@{ +#define DEVICE_SERIAL_MODE_NORMAL 0x00 +#define DEVICE_SERIAL_MODE_IRDA 0x01 +#define DEVICE_SERIAL_MODE_ASK_IR 0x02 +#define DEVICE_SERIAL_MODE_DUPLEX_HALF 0x00 +#define DEVICE_SERIAL_MODE_DUPLEX_FULL 0x10 +///@) + +/// +/// DEVICE_PRODUCER_PARALLEL. +/// +typedef struct { + UINT16 Address; ///< I/O address assigned to the parallel port. + UINT8 Irq; ///< IRQ assigned to the parallel port. + UINT8 Dma; ///< DMA assigned to the parallel port. + PARALLEL_MODE Mode; ///< Mode of the parallel port. Values are defined below. +} DEVICE_PRODUCER_PARALLEL; + +/// +/// DEVICE_PRODUCER_PARALLEL's modes. +///@{ +#define DEVICE_PARALLEL_MODE_MODE_OUTPUT_ONLY 0x00 +#define DEVICE_PARALLEL_MODE_MODE_BIDIRECTIONAL 0x01 +#define DEVICE_PARALLEL_MODE_MODE_EPP 0x02 +#define DEVICE_PARALLEL_MODE_MODE_ECP 0x03 +///@} + +/// +/// DEVICE_PRODUCER_FLOPPY +/// +typedef struct { + UINT16 Address; ///< I/O address assigned to the floppy. + UINT8 Irq; ///< IRQ assigned to the floppy. + UINT8 Dma; ///< DMA assigned to the floppy. + UINT8 NumberOfFloppy; ///< Number of floppies in the system. +} DEVICE_PRODUCER_FLOPPY; + +/// +/// LEGACY_DEVICE_FLAGS +/// +typedef struct { + UINT32 A20Kybd : 1; ///< A20 controller by keyboard controller. + UINT32 A20Port90 : 1; ///< A20 controlled by port 0x92. + UINT32 Reserved : 30; ///< Reserved for future usage. +} LEGACY_DEVICE_FLAGS; + +/// +/// DEVICE_PRODUCER_DATA_HEADER +/// +typedef struct { + DEVICE_PRODUCER_SERIAL Serial[4]; ///< Data for serial port x. Type DEVICE_PRODUCER_SERIAL is defined below. + DEVICE_PRODUCER_PARALLEL Parallel[3]; ///< Data for parallel port x. Type DEVICE_PRODUCER_PARALLEL is defined below. + DEVICE_PRODUCER_FLOPPY Floppy; ///< Data for floppy. Type DEVICE_PRODUCER_FLOPPY is defined below. + UINT8 MousePresent; ///< Flag to indicate if mouse is present. + LEGACY_DEVICE_FLAGS Flags; ///< Miscellaneous Boolean state information passed to CSM. +} DEVICE_PRODUCER_DATA_HEADER; + +/// +/// ATAPI_IDENTIFY +/// +typedef struct { + UINT16 Raw[256]; ///< Raw data from the IDE IdentifyDrive command. +} ATAPI_IDENTIFY; + +/// +/// HDD_INFO +/// +typedef struct { + /// + /// Status of IDE device. Values are defined below. There is one HDD_INFO structure + /// per IDE controller. The IdentifyDrive is per drive. Index 0 is master and index + /// 1 is slave. + /// + UINT16 Status; + + /// + /// PCI bus of IDE controller. + /// + UINT32 Bus; + + /// + /// PCI device of IDE controller. + /// + UINT32 Device; + + /// + /// PCI function of IDE controller. + /// + UINT32 Function; + + /// + /// Command ports base address. + /// + UINT16 CommandBaseAddress; + + /// + /// Control ports base address. + /// + UINT16 ControlBaseAddress; + + /// + /// Bus master address. + /// + UINT16 BusMasterAddress; + + UINT8 HddIrq; + + /// + /// Data that identifies the drive data; one per possible attached drive. + /// + ATAPI_IDENTIFY IdentifyDrive[2]; +} HDD_INFO; + +/// +/// HDD_INFO status bits +/// +#define HDD_PRIMARY 0x01 +#define HDD_SECONDARY 0x02 +#define HDD_MASTER_ATAPI_CDROM 0x04 +#define HDD_SLAVE_ATAPI_CDROM 0x08 +#define HDD_MASTER_IDE 0x20 +#define HDD_SLAVE_IDE 0x40 +#define HDD_MASTER_ATAPI_ZIPDISK 0x10 +#define HDD_SLAVE_ATAPI_ZIPDISK 0x80 + +/// +/// BBS_STATUS_FLAGS;. +/// +typedef struct { + UINT16 OldPosition : 4; ///< Prior priority. + UINT16 Reserved1 : 4; ///< Reserved for future use. + UINT16 Enabled : 1; ///< If 0, ignore this entry. + UINT16 Failed : 1; ///< 0 = Not known if boot failure occurred. + ///< 1 = Boot attempted failed. + + /// + /// State of media present. + /// 00 = No bootable media is present in the device. + /// 01 = Unknown if a bootable media present. + /// 10 = Media is present and appears bootable. + /// 11 = Reserved. + /// + UINT16 MediaPresent : 2; + UINT16 Reserved2 : 4; ///< Reserved for future use. +} BBS_STATUS_FLAGS; + +/// +/// BBS_TABLE, device type values & boot priority values. +/// +typedef struct { + /// + /// The boot priority for this boot device. Values are defined below. + /// + UINT16 BootPriority; + + /// + /// The PCI bus for this boot device. + /// + UINT32 Bus; + + /// + /// The PCI device for this boot device. + /// + UINT32 Device; + + /// + /// The PCI function for the boot device. + /// + UINT32 Function; + + /// + /// The PCI class for this boot device. + /// + UINT8 Class; + + /// + /// The PCI Subclass for this boot device. + /// + UINT8 SubClass; + + /// + /// Segment:offset address of an ASCIIZ description string describing the manufacturer. + /// + UINT16 MfgStringOffset; + + /// + /// Segment:offset address of an ASCIIZ description string describing the manufacturer. + /// + UINT16 MfgStringSegment; + + /// + /// BBS device type. BBS device types are defined below. + /// + UINT16 DeviceType; + + /// + /// Status of this boot device. Type BBS_STATUS_FLAGS is defined below. + /// + BBS_STATUS_FLAGS StatusFlags; + + /// + /// Segment:Offset address of boot loader for IPL devices or install INT13 handler for + /// BCV devices. + /// + UINT16 BootHandlerOffset; + + /// + /// Segment:Offset address of boot loader for IPL devices or install INT13 handler for + /// BCV devices. + /// + UINT16 BootHandlerSegment; + + /// + /// Segment:offset address of an ASCIIZ description string describing this device. + /// + UINT16 DescStringOffset; + + /// + /// Segment:offset address of an ASCIIZ description string describing this device. + /// + UINT16 DescStringSegment; + + /// + /// Reserved. + /// + UINT32 InitPerReserved; + + /// + /// The use of these fields is IBV dependent. They can be used to flag that an OpROM + /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI + /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup + /// + UINT32 AdditionalIrq13Handler; + + /// + /// The use of these fields is IBV dependent. They can be used to flag that an OpROM + /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI + /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup + /// + UINT32 AdditionalIrq18Handler; + + /// + /// The use of these fields is IBV dependent. They can be used to flag that an OpROM + /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI + /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup + /// + UINT32 AdditionalIrq19Handler; + + /// + /// The use of these fields is IBV dependent. They can be used to flag that an OpROM + /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI + /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup + /// + UINT32 AdditionalIrq40Handler; + UINT8 AssignedDriveNumber; + UINT32 AdditionalIrq41Handler; + UINT32 AdditionalIrq46Handler; + UINT32 IBV1; + UINT32 IBV2; +} BBS_TABLE; + +/// +/// BBS device type values +///@{ +#define BBS_FLOPPY 0x01 +#define BBS_HARDDISK 0x02 +#define BBS_CDROM 0x03 +#define BBS_PCMCIA 0x04 +#define BBS_USB 0x05 +#define BBS_EMBED_NETWORK 0x06 +#define BBS_BEV_DEVICE 0x80 +#define BBS_UNKNOWN 0xff +///@} + +/// +/// BBS boot priority values +///@{ +#define BBS_DO_NOT_BOOT_FROM 0xFFFC +#define BBS_LOWEST_PRIORITY 0xFFFD +#define BBS_UNPRIORITIZED_ENTRY 0xFFFE +#define BBS_IGNORE_ENTRY 0xFFFF +///@} + +/// +/// SMM_ATTRIBUTES +/// +typedef struct { + /// + /// Access mechanism used to generate the soft SMI. Defined types are below. The other + /// values are reserved for future usage. + /// + UINT16 Type : 3; + + /// + /// The size of "port" in bits. Defined values are below. + /// + UINT16 PortGranularity : 3; + + /// + /// The size of data in bits. Defined values are below. + /// + UINT16 DataGranularity : 3; + + /// + /// Reserved for future use. + /// + UINT16 Reserved : 7; +} SMM_ATTRIBUTES; + +/// +/// SMM_ATTRIBUTES type values. +///@{ +#define STANDARD_IO 0x00 +#define STANDARD_MEMORY 0x01 +///@} + +/// +/// SMM_ATTRIBUTES port size constants. +///@{ +#define PORT_SIZE_8 0x00 +#define PORT_SIZE_16 0x01 +#define PORT_SIZE_32 0x02 +#define PORT_SIZE_64 0x03 +///@} + +/// +/// SMM_ATTRIBUTES data size constants. +///@{ +#define DATA_SIZE_8 0x00 +#define DATA_SIZE_16 0x01 +#define DATA_SIZE_32 0x02 +#define DATA_SIZE_64 0x03 +///@} + +/// +/// SMM_FUNCTION & relating constants. +/// +typedef struct { + UINT16 Function : 15; + UINT16 Owner : 1; +} SMM_FUNCTION; + +/// +/// SMM_FUNCTION Function constants. +///@{ +#define INT15_D042 0x0000 +#define GET_USB_BOOT_INFO 0x0001 +#define DMI_PNP_50_57 0x0002 +///@} + +/// +/// SMM_FUNCTION Owner constants. +///@{ +#define STANDARD_OWNER 0x0 +#define OEM_OWNER 0x1 +///@} + +/// +/// This structure assumes both port and data sizes are 1. SmmAttribute must be +/// properly to reflect that assumption. +/// +typedef struct { + /// + /// Describes the access mechanism, SmmPort, and SmmData sizes. Type + /// SMM_ATTRIBUTES is defined below. + /// + SMM_ATTRIBUTES SmmAttributes; + + /// + /// Function Soft SMI is to perform. Type SMM_FUNCTION is defined below. + /// + SMM_FUNCTION SmmFunction; + + /// + /// SmmPort size depends upon SmmAttributes and ranges from2 bytes to 16 bytes. + /// + UINT8 SmmPort; + + /// + /// SmmData size depends upon SmmAttributes and ranges from2 bytes to 16 bytes. + /// + UINT8 SmmData; +} SMM_ENTRY; + +/// +/// SMM_TABLE +/// +typedef struct { + UINT16 NumSmmEntries; ///< Number of entries represented by SmmEntry. + SMM_ENTRY SmmEntry; ///< One entry per function. Type SMM_ENTRY is defined below. +} SMM_TABLE; + +/// +/// UDC_ATTRIBUTES +/// +typedef struct { + /// + /// This bit set indicates that the ServiceAreaData is valid. + /// + UINT8 DirectoryServiceValidity : 1; + + /// + /// This bit set indicates to use the Reserve Area Boot Code Address (RACBA) only if + /// DirectoryServiceValidity is 0. + /// + UINT8 RabcaUsedFlag : 1; + + /// + /// This bit set indicates to execute hard disk diagnostics. + /// + UINT8 ExecuteHddDiagnosticsFlag : 1; + + /// + /// Reserved for future use. Set to 0. + /// + UINT8 Reserved : 5; +} UDC_ATTRIBUTES; + +/// +/// UD_TABLE +/// +typedef struct { + /// + /// This field contains the bit-mapped attributes of the PARTIES information. Type + /// UDC_ATTRIBUTES is defined below. + /// + UDC_ATTRIBUTES Attributes; + + /// + /// This field contains the zero-based device on which the selected + /// ServiceDataArea is present. It is 0 for master and 1 for the slave device. + /// + UINT8 DeviceNumber; + + /// + /// This field contains the zero-based index into the BbsTable for the parent device. + /// This index allows the user to reference the parent device information such as PCI + /// bus, device function. + /// + UINT8 BbsTableEntryNumberForParentDevice; + + /// + /// This field contains the zero-based index into the BbsTable for the boot entry. + /// + UINT8 BbsTableEntryNumberForBoot; + + /// + /// This field contains the zero-based index into the BbsTable for the HDD diagnostics entry. + /// + UINT8 BbsTableEntryNumberForHddDiag; + + /// + /// The raw Beer data. + /// + UINT8 BeerData[128]; + + /// + /// The raw data of selected service area. + /// + UINT8 ServiceAreaData[64]; +} UD_TABLE; + +#define EFI_TO_LEGACY_MAJOR_VERSION 0x02 +#define EFI_TO_LEGACY_MINOR_VERSION 0x00 +#define MAX_IDE_CONTROLLER 8 + +/// +/// EFI_TO_COMPATIBILITY16_BOOT_TABLE +/// +typedef struct { + UINT16 MajorVersion; ///< The EfiCompatibility major version number. + UINT16 MinorVersion; ///< The EfiCompatibility minor version number. + UINT32 AcpiTable; ///< The location of the RSDT ACPI table. < 4G range. + UINT32 SmbiosTable; ///< The location of the SMBIOS table in EFI memory. < 4G range. + UINT32 SmbiosTableLength; + // + // Legacy SIO state + // + DEVICE_PRODUCER_DATA_HEADER SioData; ///< Standard traditional device information. + UINT16 DevicePathType; ///< The default boot type. + UINT16 PciIrqMask; ///< Mask of which IRQs have been assigned to PCI. + UINT32 NumberE820Entries; ///< Number of E820 entries. The number can change from the + ///< Compatibility16InitializeYourself() function. + // + // Controller & Drive Identify[2] per controller information + // + HDD_INFO HddInfo[MAX_IDE_CONTROLLER]; ///< Hard disk drive information, including raw Identify Drive data. + UINT32 NumberBbsEntries; ///< Number of entries in the BBS table + UINT32 BbsTable; ///< A pointer to the BBS table. Type BBS_TABLE is defined below. + UINT32 SmmTable; ///< A pointer to the SMM table. Type SMM_TABLE is defined below. + UINT32 OsMemoryAbove1Mb; ///< The amount of usable memory above 1 MB, i.e. E820 type 1 memory. This value can + ///< differ from the value in EFI_TO_COMPATIBILITY16_INIT_TABLE as more + ///< memory may have been discovered. + UINT32 UnconventionalDeviceTable; ///< Information to boot off an unconventional device like a PARTIES partition. Type + ///< UD_TABLE is defined below. +} EFI_TO_COMPATIBILITY16_BOOT_TABLE; + +/// +/// EFI_LEGACY_INSTALL_PCI_HANDLER +/// +typedef struct { + UINT8 PciBus; ///< The PCI bus of the device. + UINT8 PciDeviceFun; ///< The PCI device in bits 7:3 and function in bits 2:0. + UINT8 PciSegment; ///< The PCI segment of the device. + UINT8 PciClass; ///< The PCI class code of the device. + UINT8 PciSubclass; ///< The PCI subclass code of the device. + UINT8 PciInterface; ///< The PCI interface code of the device. + // + // Primary section + // + UINT8 PrimaryIrq; ///< The primary device IRQ. + UINT8 PrimaryReserved; ///< Reserved. + UINT16 PrimaryControl; ///< The primary device control I/O base. + UINT16 PrimaryBase; ///< The primary device I/O base. + UINT16 PrimaryBusMaster; ///< The primary device bus master I/O base. + // + // Secondary Section + // + UINT8 SecondaryIrq; ///< The secondary device IRQ. + UINT8 SecondaryReserved; ///< Reserved. + UINT16 SecondaryControl; ///< The secondary device control I/O base. + UINT16 SecondaryBase; ///< The secondary device I/O base. + UINT16 SecondaryBusMaster; ///< The secondary device bus master I/O base. +} EFI_LEGACY_INSTALL_PCI_HANDLER; + +#endif