Add a new possible state: '-1' means 'use default'. In that case seabios continue to use the current heuristic: In case memory above 4G is present enable 64-bit guest friendly configuration.
This allows forcing the one or the other behavior by setting the pci_pad_mem64 variable beforehand (which is done by another patch).
Signed-off-by: Gerd Hoffmann kraxel@redhat.com --- src/fw/pciinit.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c index b3e359d7fe62..be76c447cf19 100644 --- a/src/fw/pciinit.c +++ b/src/fw/pciinit.c @@ -55,7 +55,7 @@ u64 pcimem64_end = BUILD_PCIMEM64_END; // Resource allocation limits static u64 pci_io_low_end = 0xa000; static u64 pci_mem64_top = 0; -static u32 pci_pad_mem64 = 0; +static u32 pci_pad_mem64 = -1;
struct pci_region_entry { struct pci_device *dev; @@ -1202,8 +1202,15 @@ pci_setup(void) } }
- if (CPUPhysBits >= 36 && CPULongMode && RamSizeOver4G) - pci_pad_mem64 = 1; + pci_pad_mem64 = romfile_loadbool("opt/org.seabios/pci64", -1); + + if (pci_pad_mem64 == -1) + // when not set enable in case memory over 4G is present + pci_pad_mem64 = RamSizeOver4G ? 1 : 0; + + if (!CPULongMode) + // force off for 32-bit CPUs + pci_pad_mem64 = 0;
dprintf(1, "=== PCI bus & bridge init ===\n"); if (pci_probe_host() != 0) {