virtio 1.0 specifies the location of the various virtio regions using pci capabilities. Look them up and store the results.
Signed-off-by: Gerd Hoffmann kraxel@redhat.com --- src/hw/virtio-pci.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++++ src/hw/virtio-pci.h | 8 ++++++++ 2 files changed, 63 insertions(+)
diff --git a/src/hw/virtio-pci.c b/src/hw/virtio-pci.c index ed5bfcb..2abe601 100644 --- a/src/hw/virtio-pci.c +++ b/src/hw/virtio-pci.c @@ -88,6 +88,61 @@ fail: struct vp_device *vp_init_simple(struct pci_device *pci) { struct vp_device *vp = malloc_low(sizeof(*vp)); + u8 cap = pci_find_capability(pci, PCI_CAP_ID_VNDR, 0); + struct vp_cap *vp_cap; + u32 addr, offset; + u8 type; + + memset(vp, 0, sizeof(*vp)); + while (cap != 0) { + type = pci_config_readb(pci->bdf, cap + + offsetof(struct virtio_pci_cap, cfg_type)); + switch (type) { + case VIRTIO_PCI_CAP_COMMON_CFG: + vp_cap = &vp->common; + break; + case VIRTIO_PCI_CAP_NOTIFY_CFG: + vp_cap = &vp->notify; + break; + case VIRTIO_PCI_CAP_ISR_CFG: + vp_cap = &vp->isr; + break; + case VIRTIO_PCI_CAP_DEVICE_CFG: + vp_cap = &vp->device; + break; + default: + vp_cap = NULL; + break; + } + if (vp_cap) { + vp_cap->cap = cap; + vp_cap->bar = pci_config_readb(pci->bdf, cap + + offsetof(struct virtio_pci_cap, bar)); + offset = pci_config_readl(pci->bdf, cap + + offsetof(struct virtio_pci_cap, offset)); + addr = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0 + 4 * vp_cap->bar); + if (addr & PCI_BASE_ADDRESS_SPACE_IO) { + vp_cap->is_io = 1; + addr &= PCI_BASE_ADDRESS_IO_MASK; + } else { + vp_cap->is_io = 0; + addr &= PCI_BASE_ADDRESS_MEM_MASK; + } + vp_cap->addr = addr + offset; + dprintf(3, "pci dev %x:%x virtio cap at 0x%x type %d " + "bar %d at 0x%08x off +0x%04x [%s]\n", + pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf), + vp_cap->cap, type, vp_cap->bar, addr, offset, + vp_cap->is_io ? "io" : "mmio"); + } + + cap = pci_find_capability(pci, PCI_CAP_ID_VNDR, cap); + } + + if (vp->common.cap && vp->notify.cap && vp->isr.cap && vp->device.cap) { + dprintf(1, "pci dev %x:%x supports virtio 1.0\n", + pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf)); + }
vp->ioaddr = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0) & PCI_BASE_ADDRESS_IO_MASK; diff --git a/src/hw/virtio-pci.h b/src/hw/virtio-pci.h index e6f9c0b..893a7dd 100644 --- a/src/hw/virtio-pci.h +++ b/src/hw/virtio-pci.h @@ -99,8 +99,16 @@ typedef struct virtio_pci_isr { } virtio_pci_isr;
+struct vp_cap { + u32 addr; + u8 cap; + u8 bar; + u8 is_io; +}; + struct vp_device { unsigned int ioaddr; + struct vp_cap common, notify, isr, device; };
static inline u32 vp_get_features(struct vp_device *vp)