Dear Kevin,
Am Samstag, den 06.02.2016, 13:00 -0500 schrieb Kevin O'Connor:
On Tue, Feb 02, 2016 at 11:18:43PM -0500, Kevin O'Connor wrote:
This series adds some helper functions for working with PCI BARs (Base Address Registers), and it then updates all the drivers to use these helper functions. The new helper functions perform sanity checks on the BARs and make sure the appropriate pci command register flags are enabled. The existing driver code was inconsistent with these checks.
At the end of this series, the pci->have_driver flag is also consistently set on any PCI device that there is a SeaBIOS driver for. This will make sure SeaBIOS does not attempt to load an option rom for a device that SeaBIOS already has a native driver for.
FYI, I committed this series.
Just a note, that I successfully tested this on the ASRock E350M1.
Thank you for cleaning up the code!
Thanks,
Paul