[SeaBIOS] [PATCH 4/4] be less conservative with the 64bit pci io window

[Gerd Hoffmann]

Current seabios code will only enable and use the 64bit pci io window in
case it runs out of space in the 32bit pci mmio window below 4G.

This patch will also enable the 64bit pci io window when
  (a) RAM above 4G is present, and
  (b) the physical address space size is known, and
  (c) seabios is running on a 64bit capable processor.

This operates with the assumption that guests which are ok with memory
above 4G most likely can handle mmio above 4G too.

In case the 64bit pci io window is enabled also assign more memory to
prefetchable pci bridge windows (scale with address space).

Signed-off-by: Gerd Hoffmann 
---
 src/fw/pciinit.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
index ad6def93633b..3e9636b139a4 100644
--- a/src/fw/pciinit.c
+++ b/src/fw/pciinit.c
@@ -51,6 +51,7 @@ u64 pcimem_end     = BUILD_PCIMEM_END;
 u64 pcimem64_start = BUILD_PCIMEM64_START;
 u64 pcimem64_end   = BUILD_PCIMEM64_END;
 u64 pci_io_low_end = 0xa000;
+u32 pci_use_64bit  = 0;

struct pci_region_entry {
     struct pci_device *dev;
@@ -920,6 +921,8 @@ static int pci_bios_check_devices(struct pci_bus *busses)
         for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) {
             u64 align = (type == PCI_REGION_TYPE_IO) ?
                 PCI_BRIDGE_IO_MIN : PCI_BRIDGE_MEM_MIN;
+            if (pci_use_64bit && (type == PCI_REGION_TYPE_PREFMEM))
+                align = (u64)1 << (PhysBits - 11);
             if (!pci_bridge_has_region(s->bus_dev, type))
                 continue;
             u64 size = 0;
@@ -1108,7 +1111,7 @@ static void pci_bios_map_devices(struct pci_bus *busses)
         panic("PCI: out of I/O address space\n");

dprintf(1, "PCI: 32: %016llx - %016llx\n", pcimem_start, pcimem_end);
-    if (pci_bios_init_root_regions_mem(busses)) {
+    if (pci_use_64bit || pci_bios_init_root_regions_mem(busses)) {
         struct pci_region r64_mem, r64_pref;
         r64_mem.list.first = NULL;
         r64_pref.list.first = NULL;
@@ -1174,6 +1177,9 @@ pci_setup(void)

dprintf(3, "pci setup\n");

+    if (PhysBits >= 36 && LongMode && RamSizeOver4G)
+        pci_use_64bit = 1;
+
     dprintf(1, "=== PCI bus & bridge init ===\n");
     if (pci_probe_host() != 0) {
         return;