v5 -> v6: - Minor, fixed a typo in the subject
v4 -> v5 - Addressed Michael S. Tsirkin's comments (patch 2/2): - Open-coded pci_config_is_reserved() method.
v3 -> v4: - Addressed Kevin O'Connor's comments: - Refactored a for loop in patch 1/2. - Addressed Michael S. Tsirkin's comments (patch 2/2): - Removed not needed method - Test only base registers (dropped limits tests) - Renamed a helper method - Used 0xFF to test if the memory is reserved - Simplified code in pci_bridge_has_region - I did keep the code that restores base's address as I don't want to modify the registers in a 'query' method. (as replied on the mail thread)
v2 -> v3: - Addressed Michael S. Tsirkin's comments: - I/O and Prefetchable Memory are optional. Do not allocate ranges if they are not implemented (2/2). - Note that 2/2 patch can be seen as a separate fix. However, it is related to ranges reservation.
v1 -> v2: - Thanks Gerd Hoffmann for the review. - Addressed Michael S. Tsirkin's comments: - Limit capabilities query to 256 iterations, to make sure we don't get into an infinite loop with a broken device.
If a pci-2-pci bridge supports hot-plug functionality but there are no devices connected to it, reserve IO/mem in order to be able to attach devices later. Do not waste space, use minimum allowed.
Marcel Apfelbaum (2): hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached hw/pci: check if pci2pci bridges implement optional limit registers
src/fw/pciinit.c | 12 +++++------- src/hw/pci.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ src/hw/pci.h | 10 ++++++++++ 3 files changed, 60 insertions(+), 7 deletions(-)