Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up

[Zheng Bao]

The problem is solved.
Besides a AMD fch register setting, this patch is still needed.

XHCI_PORTSC_PED, 100) != 0)
             return -1;
+     msleep(20);
         portsc = readl(&xhci->pr[port].portsc);
         rc = speed_from_xhci[xhci_get_field(portsc, XHCI_PORTSC_SPEED)];
         break;
Zheng
From: [e-mail]
To: [e-mail]
Date: Wed, 26 Aug 2015 01:50:49 +0000
CC: [e-mail]
Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up

The patch doesn't work.
> Date: Tue, 25 Aug 2015 11:20:16 -0400
> From: [e-mail]
> To: [e-mail]
> CC: [e-mail]; [e-mail]
> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up
>
> On Tue, Aug 25, 2015 at 06:11:53AM +0000, Zheng Bao wrote:
> > I tried with Parmer, which I assume is close to ASUS F2A85-M, and got the same result.
> > :(
>
> Does the patch below help?  (Make sure CONFIG_THREADS=y).
>
> -Kevin
>
> --- a/src/hw/usb-xhci.c
> +++ b/src/hw/usb-xhci.c
> @@ -364,6 +364,7 @@ xhci_hub_reset(struct usbhub_s *hub, u32 port)
>          writel(&xhci->pr[port].portsc, portsc);
>          if (wait_bit(&xhci->pr[port].portsc, XHCI_PORTSC_PED, XHCI_PORTSC_PED, 100) != 0)
>              return -1;
>    msleep(20);
>    portsc = readl(&xhci->pr[port].portsc);
>    rc = speed_from_xhci[xhci_get_field(portsc, XHCI_PORTSC_SPEED)];
>    break;

_______________________________________________
SeaBIOS mailing list
[e-mail]
http://www.seabios.org/mailman/listinfo/seabios